HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (11 Oct 2025)

GB/T 9264-2012 English PDF

US$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9264-2012: Paints and varnishes -- Evaluation of sag resistance
Status: Valid

GB/T 9264: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 9264-2012English234 Add to Cart 3 days [Need to translate] Paints and varnishes -- Evaluation of sag resistance Valid GB/T 9264-2012
GB/T 9264-1988English199 Add to Cart 2 days [Need to translate] Determination of sagging of paint Obsolete GB/T 9264-1988

PDF similar to GB/T 9264-2012


Standard similar to GB/T 9264-2012

GB/T 9263   GB/T 9266   GB/T 9265   

Basic data

Standard ID GB/T 9264-2012 (GB/T9264-2012)
Description (Translated English) Paints and varnishes -- Evaluation of sag resistance
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G50
Classification of International Standard 87.040
Word Count Estimation 12,144
Older Standard (superseded by this standard) GB/T 9264-1988
Quoted Standard ISO 1513; ISO 1514; ISO 1517; ISO 2808; ISO 2884-1; ISO 2884-2; ISO 3270; ISO 15528
Adopted Standard ISO 16862-2003, IDT
Regulation (derived from) National Standards Bulletin No. 41 of 2012
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies a method adopted and applied on the substrate placed in the vertical position to assess Paints, varnishes and similar coating materials sag resistance method. Coatings applied in the following manner, the sag resistance can be asse

GB/T 9264-2012: Paints and varnishes -- Evaluation of sag resistance

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS87.040 G50 National Standards of People's Republic of China GB/T 9264-2012/ISO 16862.2003 Replacing GB/T 9264-1988 Paints and varnishes - Evaluation of sag resistance (ISO 16862.2003, IDT) Issued on. 2013-08-01 2012-12-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Instrument 2 5 Sampling 2 2 6 test panels 7 Step 2 8 Expression of results 4 9 Accuracy 5 10 Test Report 5 Sagging applicator Appendix A (normative) blade with a scale of 6 References 8 GB/T 9264-2012/ISO 16862.2003

Foreword

This standard rule according to GB/T 1.1-2009 given draft. This standard replaces GB/T 9264-1988 "Paints sagging determination", compared with the GB/T 9264-1998, in addition to editorial changes outside The main technical changes are as follows. --- Change the scope of the standard, the previous version is only available in the paint, the current edition is applicable to all liquid coating (see Chapter 1, Edition 1988 Chapter 1); --- Instrument of change sagging parameters (see Appendix A, 1988 edition 3.1); --- For thixotropic coating increases the pre-cut process (see 7.2.2); --- Increased the use of the spray gun applying the test mode (see 7.3); --- Change the sag meter assay results indicate the method (see Chapter 5 8.2,1988 edition). This standard uses the translation method identical with ISO 16862.2003 "Paints and varnishes - Evaluation of sag resistance." Correspondence between the consistency of the standards of international documents and normative references of the following documents. GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528.2000, IDT) GB/T 6753.2-1986 paint surface drying test small glass ball method (GB/T 6753.2-1986, eqvISO 1517. 1973) GB/T 9271-2008 Paints and varnishes standard test panels (ISO 1514.2004, MOD) GB/T 9278-2008 paint sample conditioning and testing temperature and humidity (ISO 3270. 1984, IDT) GB/T 9751.1-2008 paints and varnishes viscometer viscosity measurement - Part 1. Cone at a high shear rate operation Plate viscometer (ISO 2884-1.1999, IDT) GB/T 13452.2-2008 Paints and varnishes - Determination of film thickness (ISO 2808.2007, IDT) GB/T 20777-2006 examination and preparation of samples for paints and varnishes (ISO 1513.1992, IDT) The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee paint pigment (SAC/TC5) centralized. This standard was drafted. CNOOC Changzhou coating Chemical Research Institute, Carpoly Chemical Group Co., Ltd., Shandong music of the paint industry shares Limited. The main drafters of this standard. Gu Hui Qi, Lin Xia, Shen Xiaozhong. This standard replaces the standards previously issued as follows. --- GB/T 9264-1988. GB/T 9264-2012/ISO 16862.2003 Paints and varnishes - Evaluation of sag resistance

1 Scope

This standard specifies a method adopted was applied on a substrate and placed in the vertical position to assess Paints, varnishes and similar coating material Choke Hanging of methods. After pressing the coating is applied in the following manner, sag resistance can be assessed. a) with a flow graduated hanging coater in horizontal test plate coating, and then the test panel vertically, or b) on the substrate placed in the vertical position with the spray gun. NOTE. Brush or roll coating manner if they can form a uniform coating can also be used. This standard applies only to liquid coatings.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 1513 inspection and preparation of samples for paints and varnishes (Paintsandvarnishes-Examinationandpreparation ofsamplesfortesting) Paints and varnishes ISO 1514 standard test panels (Paintsandvarnishes-Standardpanelsfortesting) ISO 1517 Paints and varnishes - Surface - drying test small glass ball method (Paintsandvarnishes-surface-drying test-Balotinimethod) Paints and varnishes ISO 2808 Determination of film thickness (Paintsandvarnishes-Determinationoffilmthick- ness) ISO 2884-1 Paints and varnishes - Determination of viscosity by rotary viscometer - Part 1. The high shear rate operation of a cone and plate viscometer (Paintsandvarnishes-Determinationofviscosityusingrotaryviscometers-Part 1. Cone-and-plate viscometeroperatedatahighrateofshear) ISO 2884-2 Paints and varnishes rotational viscometer viscosity - Part 2. disc at a predetermined rate of work or spherical sticky Meter (Paintsandvarnishes-Determinationofviscosityusingrotaryviscometers-Part 2. Discorbal viscometeroperatedataspecifiedspeed) Temperature and humidity ISO 3270 Paints, varnishes and raw materials for conditioning and testing (Paintsandvarnishesand theirrawmaterials- Temperaturesandhumiditiesforconditioningandtesting) ISO 15528 Paints, varnishes and raw materials for paints and varnishes - Sampling (Paints, varnishesandrawmaterialsfor paintsandvarnishes-Sampling)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Sag resistance sagresistance In applying the provisions of the conditions specified environmental conditions and provisions of the substrate, tilted model will not flow in the drying process GB/T 9264-2012/ISO 16862.2003

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9264-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9264-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9264-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9264-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9264-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9264-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.