|
US$559.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9119-2010: Slip-on-welding plate steel pipe flanges
Status: Obsolete GB/T 9119: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9119-2010 | English | 559 |
Add to Cart
|
4 days [Need to translate]
|
Slip-on-welding plate steel pipe flanges
| Obsolete |
GB/T 9119-2010
|
| GB/T 9119-2000 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Slip-on-welding plate steel pipe flanges with flate face or raised face
| Obsolete |
GB/T 9119-2000
|
| GB/T 9119.1-1988 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Slipon welding plate steel pipe flanges with flat face for PN 0. 25MPa (2. 5 bar)
| Obsolete |
GB/T 9119.1-1988
|
PDF similar to GB/T 9119-2010
Basic data | Standard ID | GB/T 9119-2010 (GB/T9119-2010) | | Description (Translated English) | Slip-on-welding plate steel pipe flanges | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J15 | | Classification of International Standard | 23.040.60 | | Word Count Estimation | 14,194 | | Date of Issue | 1/14/2011 | | Date of Implementation | 10/1/2011 | | Older Standard (superseded by this standard) | GB/T 2506-2005; GB/T 9119-2000 | | Quoted Standard | GB/T 9112; GB/T 9124 | | Adopted Standard | ASME B16.5-2009, MOD; EN 1092-1-2007, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 2 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies Nominal labeled with PN plate flat welding steel pipe flange type, size, technical requirements and marking. This Standard is applicable to nominal pressure PN 2. 5 ~ PN plate flat welding steel pipe flanges 100. | GB/T 9119-2010: Slip-on-welding plate steel pipe flanges---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Slip-on-welding plate steel pipe flanges
ICS 23.040.60
J15
National Standards of People's Republic of China
Replacing GB/T 9119-2000, GB/T 2506-2005
Plate flat welding steel pipe flanges
Issued on. 2011-01-14
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 9112 ~ 9124-2010 "steel pipe flanges" series Standard is a modified ASMEB16.5-2009 "pipe flanges and flanged pipe
Member (NPS⅟2 ~ NPS24) "and EN1092-1.2007" Flanges and their connecting pipes, valves, fittings and accessories, circular flange,
PN identification - Part 1. Steel flanges. " ASMEB16.5-2009 is a complete standards for Class marks flange,
EN1092-1.2007 is a complete standard PN mark on the flange. This series of standards using a combination of the above two criteria, including
Mark the relevant technical content Class flange and flange PN mark. This series of standards for a total 13 standard, this standard is one of a
standard.
This standard EN1092-1.2007 standard main difference is as follows.
--- The preparation of this standard format and EN1092-1.2007 different standards;
--- EN1092-1.2007 standard does not include two DN175 and DN225 nominal size, according to users of marine flange
Requirements, this series of standards PN flange marked increase of DN175 and DN225 only two male marine said flange
size.
This standard replaces GB/T 9119-2000 "flat panel projecting flat welded steel pipe flanges", GB/T 2506-2005 "ship lap welding steel
Flange (four into bits) ", compared with the original standard main changes are as follows.
--- The original GB/T 9119-2000 and GB/T 2506-2005 integrated as a standard;
--- According to EN1092-1.2007 standard, the nominal pressure range PN labeled expanded from the original PN2.5 ~ PN40 to
PN2.5 ~ PN100;
--- PN flange marked increase in the DN175 and DN225 only two male Marine flange nominal size;
--- According to EN1092-1.2007 standard, flange dimensions data PN-labeled comprehensive revision;
--- Various sealing surface increases the scope of application form.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee pipe accessories.
This standard was drafted. the machine Productivity Promotion Center, Jiangsu Haida Pipe Fittings Group Co., Ltd. Bengbu City Zhongyuan fabrication of pipe fittings
Limited, St-day Group of Hebei Bao silver high-pressure pipe flanges Limited, China Shipbuilding Technology and Economy Research Institute, Zhejiang Chaoda Valve
Co., Ltd., a Group Ltd. Paul.
The main drafters of this standard. Li Junying, to Qiu, Li, Wangqing Yao, Li Bao silver, Feng Feng, Yan Jing Wen, send Luo Yuan, Chen Youjun.
This standard replaces the standards previously issued as follows.
--- GB/T 9119.1 ~ 9119.10-1988, GB/T 9119-2000;
--- GB/T 2506-1989, GB/T 2506-2005.
Plate flat welding steel pipe flanges
1 Scope
This standard specifies the nominal pressure PN with marked plate flat welding steel pipe flange type, size, technical requirements and marking.
This standard applies to nominal pressure plate flat welding steel pipe flanges PN2.5 ~ PN100 in.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 9112 steel pipe flanges with type parameters
GB/T 9124 steel pipe flanges
3 type and size
3.1 plate flat welding steel pipe flange sealing surface type with PN-labeled and applicable nominal and nominal size range according to Table 1
Provisions.
Table 1 plate flat welding steel pipe flange sealing surface type and labeled with PN nominal pressure applied and the nominal size range
Sealing surface
Type
Nominal
PN2.5 PN6 PN10 PN16 PN25 PN40 PN63 PN100
Plane (FF)
DN10 ~
DN2000
DN10 ~
DN2000
DN10 ~
DN2000
DN10 ~
DN2000
DN10 ~
DN800
DN10 ~
DN600
Raised face (RF)
DN10 ~
DN2000
DN10 ~
DN2000
DN10 ~
DN2000
DN10 ~
DN2000
DN10 ~
DN800
DN10 ~
DN600
DN10 ~
DN400
DN10 ~
DN350
3.2 plate flat welding steel pipe flange type shall comply with Figs. 1 and 2, the flange dimensions comply with the requirements of Tables 2 to 9.
Figure 1 plane (FF) plate flat welding steel pipe flanges
(Applicable to PN2.5, PN6, PN10, PN16, PN25 and PN40)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9119-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 9119-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 9119-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9119-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 9119-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9119-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|