HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 7948-2024 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7948-2024: Plain bearings - Test method for PV limit of plastic bushes
Status: Valid

GB/T 7948: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 7948-2024English279 Add to Cart 3 days [Need to translate] Plain bearings - Test method for PV limit of plastic bushes Valid GB/T 7948-2024
GB/T 7948-1987English199 Add to Cart 2 days [Need to translate] Test method for PV limit of plastics bearings Obsolete GB/T 7948-1987

PDF similar to GB/T 7948-2024


Standard similar to GB/T 7948-2024

GB/T 18329.1   GB/T 2889.6   GB/T 35087   GB/T 7308.1   GB/T 2889.5   

Basic data

Standard ID GB/T 7948-2024 (GB/T7948-2024)
Description (Translated English) Plain bearings - Test method for PV limit of plastic bushes
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J12
Classification of International Standard 21.100.10
Word Count Estimation 14,158
Date of Issue 2024-09-29
Date of Implementation 2025-01-01
Older Standard (superseded by this standard) GB/T 7948-1987
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 7948-2024: Plain bearings - Test method for PV limit of plastic bushes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plain bearings - Test method for PV limit of plastic bushes Sliding bearings - Plastic bushing limit PV test method ICS 21.100.10 CCS J 12 National Standard of the People's Republic of China Replace GB/T 7948-1987 Released on 2024-09-29 2025-01-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 7948-1987 "Limit PV test method for plastic bearings". In addition to structural adjustments and editorial changes, the main technical changes are as follows. The scope of the standard has been changed (see Chapter 1, Chapter 1 of the 1987 edition); - Added the terms and definitions of "nominal contact area", "relative sliding velocity" and "specific load" (see 3.1, 3.2 and 3.3); - The definitions of "PV value" and "limit PV value" have been changed (see 3.4, 3.5, 1.1, 1.2 of the 1987 edition); - Added test principles (see Chapter 4); - Changed the instrumentation requirements (see Chapter 5, Chapter 3, 5.6, Figure 4 of the 1987 edition); - The specimen requirements have been changed (see Chapter 6, Chapter 2 of the 1987 edition); - The test environment and test preparation requirements have been changed (see 7.1, 7.2, Chapter 4 of the 1987 edition); - Added lubrication method (see 7.3); - The relative sliding linear velocity requirements have been changed (see 7.4, 5.2 of the 1987 edition); - The fit clearance requirements have been changed (see 7.5, 2.3 of the 1987 edition); - The test procedure has been changed (see Chapter 8, Chapter 5 of the 1987 edition); - Added test result assessment (see Chapter 9); - The calculation contents related to the limit PV value have been changed (see 10.3, 6.3 of the 1987 edition); - The contents of the test report have been changed (see Chapter 11, Chapter 7 of the 1987 edition). - Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Sliding Bearings (SAC/TC 236). This document was drafted by. Hefei Bolin New Materials Co., Ltd., China Machinery Productivity Promotion Center Co., Ltd., Shuangfei Oil-free Bearing Group Group Co., Ltd., Zhejiang Changsheng Sliding Bearing Co., Ltd., Zhejiang Zhongda Precision Parts Co., Ltd., Zhejiang Changsheng Plastic Shaft Cheng Technology Co., Ltd., Jiaxing Meitel Baoxin Machinery Industry Co., Ltd., China Machinery Testing Equipment Co., Ltd., Shandong Fuma Bearing Co., Ltd. Company, Huayi Bearing Technology (Jiangsu) Co., Ltd. This document is interpreted by the National Technical Committee for Sliding Bearing Standardization. This document was first published in 1987 and this is the first revision. Sliding bearings - Plastic bushing limit PV test method

1 Scope

This document describes the limiting PV values of plastic bushings in the form of rotational motion under dry friction, boundary lubrication with oil or grease. Test method. This document is applicable to the determination of the limiting PV value of plastic and plastic sleeves with plastic coverings. This document is not applicable to the determination of the limiting PV value of plastic bushings with oscillating or linear reciprocating motion.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies. in this document. GB/T 2889 (all parts) Terms, definitions, classification and symbols for sliding bearings GB/T 3974 Dimensions and tolerances of thermoplastic sleeves for sliding bearings GB/T 12613.1 Sliding bearing rolled sleeves Part 1.Dimensions

3 Terms and definitions

GB/T 2889 (all parts) and the following terms and definitions apply to this document. 3.1 Nominal contact area projected bearing area The product of the bearing width and the inner bore diameter. Note. The projection area of the bearing surface (semi-cylinder) perpendicular to the load direction. 3.2 relative sliding linear velocity The relative sliding velocity between the shaft and the bearing surface. 3.3 specific bearing load Specific pressure The load per unit nominal contact area of a bearing. 3.4 PV value The product of specific load (P) and relative sliding velocity (V). 3.5 PV limit value The product of the limit load that the bearing can bear under a certain relative sliding linear velocity and the relative sliding linear velocity, or the product of the limit load that the bearing can bear under a certain relative sliding linear velocity. The product of the maximum relative sliding linear velocity that the bearing can withstand and the specific load. Note. The unit is MPa·m/s.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7948-2024_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7948-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7948-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7948-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 7948-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7948-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.