|
US$274.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7441-2008: Measurement of airborne noise emitted by steam turbines and driven machinery
Status: Valid GB/T 7441: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7441-2008 | English | 274 |
Add to Cart
|
3 days [Need to translate]
|
Measurement of airborne noise emitted by steam turbines and driven machinery
| Valid |
GB/T 7441-2008
|
| GB/T 7441-1987 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Noise measurement method for the power plant turbine generator
| Obsolete |
GB/T 7441-1987
|
PDF similar to GB/T 7441-2008
Basic data | Standard ID | GB/T 7441-2008 (GB/T7441-2008) | | Description (Translated English) | Measurement of airborne noise emitted by steam turbines and driven machinery | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K54 | | Classification of International Standard | 27.040 | | Word Count Estimation | 14,193 | | Date of Issue | 2008-07-16 | | Date of Implementation | 2009-04-01 | | Older Standard (superseded by this standard) | GB/T 7441-1987 | | Adopted Standard | IEC 61063-1991, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard applies to be driven by the turbine and mechanical assembly (hereinafter referred to as steam turbine) issued by the spatial noise measurements. Equipped with the required auxiliary equipment of the unit does not limit the size of output power. This standard applies only to the turbine located at the operational level to the level above and bounded continuous measurement within the envelope surface of the steam turbine (turbine, generator and connecting parts). | GB/T 7441-2008: Measurement of airborne noise emitted by steam turbines and driven machinery---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measurement of airborne noise emitted by steam turbines and driven machinery
ICS 27.040
K54
National Standards of People's Republic of China
GB/T 7441-2008/IEC 61063.1991
Replacing GB/T 7441-1987
Steam turbines and driven machinery of
Noise measurement space
(IEC 61063.1991, IDT)
Posted 2008-07-16
2009-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with IEC 61063.1991 "Measurement of noise acoustic space steam turbines and driven machinery of" (in English).
This standard is equivalent translation IEC 61063.1991.
For ease of use, this standard made the following editorial changes.
a) the name of the standard was changed to. "spatial noise measurement turbines and driven machinery issued";
b) Remove IEC 61063.1991 original "Preface" and "Introduction";
c) "reference standard" Reorder by GB/T 1.1-2000;
d) to IEC 61063.1991 in the original part of the contents, according to China described the habits appropriate compiler;
e) of IEC 61063.1991 Part of the original figure to be recompiled;
This standard replaces GB/T 7441-1987 "power plant turbine noise measurement method." This standard and GB/T 7441-1987
Compared to the major differences are as follows.
a) the name of the standard was changed to. "spatial noise turbine driven machinery and measurement."
b) This standard is identical with IEC 61063.1991, and GB/T 7441-1987 vary greatly, can not be compared.
c) The increase in the standard normative references and other documents, the content of terms and definitions;
d) The standard set of measurement points, the reflecting surface and put forward specific requirements.
Appendix A of this standard is a normative appendix.
The standard proposed by China Electrical Equipment Industrial Association.
This standard by the National Standardization Technical Committee turbine (SAC/TC172) centralized.
This standard was drafted. Shanghai Power Equipment Research Institute, Xi'an Thermal Power Research Institute Co., Dongfang Steam Turbine Co., Ltd.
The main drafters of this standard. Cheng Pei Jun, Liu Zhijiang, Hu Tingrui, Liu Chen, Ye Fen, Yang Ruifu.
This standard replaces the standards previously issued as follows.
--- GB/T 7441-1987.
GB/T 7441-2008/IEC 61063.1991
Steam turbines and driven machinery of
Noise measurement space
1 Scope
1.1 General
1.1.1 This standard applies to be driven by a steam turbine and assembly machine (hereinafter referred to as steam turbine) issued by the spatial noise measurements.
Equipped with provisions for auxiliary equipment unit does not limit the size of its output power. This standard applies only located above the level of turbine operation
To the level and within the boundary of the continuous measurement of the envelope surface of the steam turbine (turbines, generators and connecting parts).
Above the ground on the basis of the turbine, the turbine has run level reflection characteristics continuously extending out, it will be considered the reflection plane.
1.1.2 Large Turbine Steam Turbine operational levels often located below the horizontal centerline and close thereto (see Figure 1). in case
The level is continuous and does not make the turbine operating noise level emitted less noise measurement microphone at the opening, you can use this
Standard effective measure steam turbine noise.
1 Steam Turbine (including their accessories and auxiliary) schematic position
1.1.3 When the turbine is running near the level of the lower side of the steam turbine centerline and having any of the following structure when.
a) pass through a grid-shaped floor structure;
b) a solid floor but in the vicinity of the turbine group with an opening;
c) 1m ~ 2m wide solid or grid-shaped structure of the channel.
The turbine can not be considered operational level reflecting plane, then the basis of the ground plane is a reflection of the steam turbine.
In continuous measurement envelope surface in order to run the turbine or steam turbine foundation ground level for the sector, the level is located below the turbine operation
Additional equipment and auxiliary noise, is expected to have a significant impact on the measurement microphone position. In this case, the use of this standard Determination of sound power level
invalid.
If the sound level of the standard used for comparison of similar turbine at 1m, the turbine should run as a continuous level measurement envelope surface boundary
surface. This will depend on the effectiveness of comparing the measured noise by the auxiliary and additional equipment at the measuring point is generated, so that these regulations require precise
Number of auxiliary motors, type and location.
Identify the accessories and auxiliary noise radiation impact on the sound level measured at the microphone position, preferably by GB/T 3768 Determination of these auxiliaries
Noise, noise to the microphone and to determine the propagation characteristics of the measurement location. However, this approach is beyond the scope of this standard.
NOTE. When opening the local part of the board during the trial closed with an appropriate corresponding panel (panel side should have the same level of turbine operation reflection characteristics
Sex), was regarded as an effective measure.
GB/T 7441-2008/IEC 61063.1991
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7441-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 7441-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 7441-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7441-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 7441-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7441-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|