Path: Home > GB/T > Page727 > GB/T 727-2025 Home > Standard_List > GB/T > Page727 > GB/T 727-2025 GB/T 727: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 727-2025 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Turbocharger nomenclature and code
| |
GB/T 727-2025
|
| GB/T 727-2003 | English | 139 |
Add to Cart
|
2 days [Need to translate]
|
Turbocharger nomenclature and code
| Valid |
GB/T 727-2003
|
| GB/T 727-1985 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Denomination for turbochargers and code of identification symbols
| Obsolete |
GB/T 727-1985
|
Basic data | Standard ID | GB/T 727-2025 (GB/T727-2025) | | Description (Translated English) | Turbocharger nomenclature and code | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J91 | | Classification of International Standard | 27.020 | | Word Count Estimation | 10,129 | | Date of Issue | 2025-10-31 | | Date of Implementation | 2026-05-01 | | Older Standard (superseded by this standard) | GB/T 727-2003 | | Issuing agency(ies) | State Administration for Market Regulation and Standardization Administration of China | GB/T 727-2025: Turbocharger nomenclature and code---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 27.020
CCSJ91
National Standards of the People's Republic of China
Replaces GB/T 727-2003
Turbocharger Product Naming and Model Numbering Method
Published on 2025-10-31
Implemented on May 1, 2026
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Table of contents
Preface III
1.Scope 1
2 Normative References 1
3.Terms and Definitions 1
4.Product Naming 1
5.Model Numbering Method 1
Appendix A (Informative) Example of Turbocharger Model Numbering 3
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document replaces GB/T 727-2003 "Methods for Naming and Compiling Model Numbers of Turbocharger Products". Compared with GB/T 727-2003,
Apart from structural adjustments and editorial changes, the main technical changes are as follows.
a) The product name was changed (see Chapter 4, Chapter 2 of the.2003 edition);
b) Added model designations for mixed-flow and electrically assisted turbochargers (see Chapter 5);
c) The meaning of the structural features of the axial-flow turbocharger has been changed (see Chapter 5, Chapter 3 of the.2003 edition).
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed by the China Machinery Industry Federation.
This document is under the jurisdiction of the National Technical Committee on Standardization of Internal Combustion Engines (SAC/TC177).
This document was drafted by. Hunan Tianyan Machinery Co., Ltd., Shanghai Motor Vehicle Inspection and Certification Technology Research Center Co., Ltd., and Kangyue.
Technology (Shandong) Co., Ltd., Ningbo Fengwo Turbocharging Technology Co., Ltd., Jiangsu Yihejie Automotive Technology Co., Ltd., Zhejiang Xinchai
Joint-stock company, Weifang University of Science and Technology, Tianjin Beifang Tianli Turbocharging Technology Co., Ltd., Wuxi Best Precision Machinery Co., Ltd., China
Northern Engine Research Institute.
The main drafters of this document are. Hu Liaoping, Yao Guorui, Guo Hua, Liu Ying, Wang Zhihua, Liu Quan, Bo Cunzhi, Chen Shaolin, Li Yanzhao, and Yan Jianfei.
Bian Qiyuan, Men Rixiu, Wang Qian, Pan Wei, Yan Wenbin, Sun Yangli, Ji Weibin, Hua Lin.
This document was first published in 1965, revised for the first time in 1985, revised for the second time in.2003, and this is the third revision.
Turbocharger Product Naming and Model Numbering Method
1 Scope
This document describes the product naming and model numbering method for turbochargers used in internal combustion engines.
This document applies to exhaust gas turbochargers and electrically assisted turbochargers.
2 Normative references
This document has no normative references.
3 Terms and Definitions
This document does not contain any terms or definitions that need to be defined.
4.Product Naming
Turbochargers for internal combustion engines are classified into exhaust gas turbochargers and electric-assisted turbochargers based on their power source.
Exhaust gas turbochargers consist of a single-stage centrifugal compressor and a single-stage radial-flow turbine or a single-stage mixed-flow turbine or a shaft-mounted turbocharger.
Flow turbines are composed of components. Their naming conventions generally follow the turbine's name, and are as follows.
a) Radial-flow turbocharger, also known as a "radial-flow turbocharger";
b) Mixed-flow turbocharger, also known as a "mixed-flow turbocharger";
c) Axial-flow exhaust gas turbocharger, abbreviated as "axial-flow turbocharger".
An electrically assisted turbocharger is based on the structure of an exhaust gas turbocharger, with the addition of an electric motor component. The shaft of this electric motor component is parallel to that of the turbocharger.
The shaft can drive the compressor to work alone or in conjunction with the turbine.
5.Model Numbering Method
5.1 The product model of turbochargers for internal combustion engines consists of Chinese Pinyin letters and Arabic numerals (see Figure 1), and its model number includes the following.
List three parts.
a) Heading. Product name symbol and structural feature symbol, as specified in Tables 1 and 2.
b) Middle section. Basic series symbols for products, expressed in millimeters, rounded to the nearest integer.
c) Tail section. Variant symbol. This variant design assumes the basic compressor impeller outer diameter remains unchanged, but alters only the flow path of the compressor and turbine.
Modifications, or variations resulting from changes in the turbocharger's installation connection dimensions, bearing type, rotor rotation direction, or component materials.
product.
Figure 1.Instructions for Designating Product Model Numbers for Turbochargers
Price & DeliveryUS$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 727-2025: Turbocharger nomenclature and code
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 727-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 727-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 727-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 727-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 727-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 727-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |