|
US$304.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7260.40-2020: Uninterruptible power systems (UPS) - Part 4: Environmental aspects. Requirements and reporting
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7260.40-2020 | English | 304 |
Add to Cart
|
3 days [Need to translate]
|
Uninterruptible power systems (UPS) - Part 4: Environmental aspects. Requirements and reporting
| Valid |
GB/T 7260.40-2020
|
PDF similar to GB/T 7260.40-2020
Basic data | Standard ID | GB/T 7260.40-2020 (GB/T7260.40-2020) | | Description (Translated English) | Uninterruptible power systems (UPS) - Part 4: Environmental aspects. Requirements and reporting | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K85 | | Classification of International Standard | 29.200 | | Word Count Estimation | 16,179 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-07-01 | | Quoted Standard | IEC 62040-3-2011; IEC 62474-2012 | | Adopted Standard | IEC 62040-4-2013��IDT | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the procedures and requirements for environmental declaration of uninterruptible power supply systems, with the purpose of reducing any negative effects on the environment during the entire life cycle of the uninterruptible power supply system. This standard is coordinated with applicable general environmental standards of the same kind and contains additional detailed information related to uninterruptible power supply systems. This standard applies to uninterruptible power supply systems with fixed frequency, single-phase or three-phase AC output voltage not exceeding 1000V, movable, not easy to move, and fixed installation. It is governed by IEC 62040-1, IEC 62040-2 and IEC 62040-3- According to 2011 regulations, the energy storage device is usually connected via the DC link. | GB/T 7260.40-2020: Uninterruptible power systems (UPS) - Part 4: Environmental aspects. Requirements and reporting
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Uninterruptible Power System (UPS) Part 4: Environmental Requirements and Reports)
ICS 29:200
K85
National Standards of People's Republic of China
Uninterruptible Power System (UPS)
Part 4: Environmental requirements and reports
(IEC 62040-4:2013, IDT)
2020-12-14 release
2021-07-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Uninterruptible power supply system environmental factor declaration process 4
4:1 Overview 4
4:2 Results 4
5 Requirements 4
5:1 Overview 4
5:2 Basic requirements 4
5:3 Requested changes 6
5:4 Pending requirements 7
Appendix A (Normative Appendix) Statement of Basic Requirements 8
Appendix B (Informative Appendix) Additional Requirements Statement 9
Appendix C (informative appendix) Pending content of environmental factors 10
Reference 11
Foreword
GB/T 7260 "Uninterruptible Power System (UPS)" has or plans to publish the following parts:
---Part 1-1: General regulations and safety requirements of UPS used in the area where the operator touches;
---Part 1-2: General regulations and safety requirements for UPS used in restricted areas;
---Part 2: Electromagnetic compatibility (EMC) requirements;
---Part 3: Methods and test requirements for determining performance;
---Part 4: Environmental requirements and reports;
---Part 5-3: DC output UPS performance and test requirements:
This part is Part 4 of GB/T 7260:
This section was drafted in accordance with the rules given in GB/T 1:1-2009:
The translation method used in this part is equivalent to the IEC 62040-4:2013 "Uninterruptible Power Supply System (UPS) Part 4: Environmental Requirements and
report":
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows:
---GB/T 7260:3-2003 Uninterruptible Power Supply (UPS) Part 3: Methods and test requirements for determining performance
(IEC 62040-3:1999,MOD)
---GB /Z 26668-2011 Material Declaration for Electrical and Electronic Products (IEC 62474CDV:2010, NEQ)
This part was proposed by China Electrical Equipment Industry Association:
This part is under the jurisdiction of the National Power Electronic System and Equipment Standardization Technical Committee (SAC/TC60):
Drafting organizations of this section: Huawei Technologies Co:, Ltd:, Guangdong Zhicheng Champion Group Co:, Ltd:, Huazhong University of Science and Technology, Xi'an Power Electronics Technology
Technology Research Institute, China General Nuclear Power Engineering Co:, Ltd:, Kehua Hengsheng Co:, Ltd:, Schneider Electric Information Technology (China) Co:, Ltd:, Aerospace
Ke (Guangdong) Technology Co:, Ltd:, Xiamen Aiweida Electronics Co:, Ltd:, Hangzhou Borui Electronic Technology Co:, Ltd:, China Information and Communication Research
Institute, Renault (Changzhou) Electronics Co:, Ltd:, Xiankong Strapdown Electric Co:, Ltd:, ZTE Corporation, Yiwu Yuantai Intelligent Technology
Technology Co:, Ltd:, Easytech Group Co:, Ltd:, Spallation Neutron Source Science Center, Xi'an Libeian Intelligent Technology Co:, Ltd:, Zhuhai Titan
Technology Co:, Ltd:
The main drafters of this section: Zhang Xiaofei, Li Minying, Zhang Yu, Wei Hongqi, Fu Mingxing, Huang Zhanjiangyong, Li Shuguang, Luo Feng, Chen Yifeng,
Li Jiming, Qi Shuguang, Gao Xinhua, Liu Yafeng, Xie Fenghua, Chen Shuangjie, Yu Wei, Qi Xin, Ni Liaoyong, Pan Jingyi, Cai Xiongbing, Lu Peizhuan, Liu Ming:
Introduction
This part of GB/T 7260 is about product standards (environmental information) for uninterruptible power supply systems:
Manufacturers, purchasers, certification bodies and users provide references to reduce the impact of uninterruptible power supply systems on the environment during their service life:
This section helps:
---Determine the basic environmental parts of environmental standards, regulations, codes of conduct, agreements and other requirements applicable to uninterruptible power supply systems, and confirm
Ensure compliance and avoid the need for explanation;
---Use standardized methods to deliver environmental information and respond to user requirements;
---Focus on the requirements that are mainly applicable to the environment, and minimize the reporting requirements;
---Propose standards with compliance requirements, predict the upcoming environmental regulations and plans applicable to uninterruptible power supply systems;
---Standardization of environmental information transmission in the supply chain;
---Report and transmit environmental information as a reference for measuring environmental progress between product generations:
Uninterruptible Power System (UPS)
Part 4: Environmental requirements and reports
1 Scope
This part of GB/T 7260 specifies the procedures and requirements for environmental declarations of uninterruptible power supply systems:
Any negative effects of the power system on the environment throughout its life cycle: This part is coordinated with applicable similar general environmental standards, and includes
Contains additional detailed information related to the uninterruptible power supply system:
This part is applicable to fixed frequency, single-phase or three-phase AC output voltage not exceeding 1000V, movable, not easy to move and fixed installation
The uninterruptible power supply system is regulated by IEC 62040-1, IEC 62040-2 and IEC 62040-3:2011:
Can device:
This section does not include:
---Traditional AC input and output switchboard;
---DC switchboard and related switches (e:g: battery switch, rectifier output switch or inverter input switch);
--- Independent static switching system specified by IEC 62310-1, IEC 62310-2 and IEC 62310-3;
---The output voltage comes from the system of rotating electric machine:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
IEC 62040-3:2011 Uninterruptible power supply system (UPS) Part 3: Method for determining performance and test requirements [Uninter-
ruptiblepowersystems(UPS)-Part 3:Methodofspecifyingtheperformanceandtestrequirements]
IEC 62474:2012 Electrical industry and material declaration for electrical products (Materialdeclarationforproductsofand
fortheelectrotechnicalindustry)
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
Endoflife
The life cycle phase of a product from the phase of its intended use:
3:2
Endoflifetreatment
Any operation after waste is placed in a recycling facility or ready for disposal:
Note: Operations include dismantling, material separation and processing:
3:3
Usephase
The life cycle stage of a product from the beginning of its use to the end of its service life:
|