HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 6468-2010 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6468-2010: The helix artifact of gear
Status: Valid

GB/T 6468: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6468-2010English229 Add to Cart 3 days [Need to translate] The helix artifact of gear Valid GB/T 6468-2010
GB/T 6468-2001English279 Add to Cart 3 days [Need to translate] The helix master of gear Obsolete GB/T 6468-2001
GB/T 6468-1986English239 Add to Cart 2 days [Need to translate] The helix master of gear Obsolete GB/T 6468-1986

PDF similar to GB/T 6468-2010


Standard similar to GB/T 6468-2010

GB/T 1216   GB/T 22092   GB/T 22097   GB/T 8177   GB/T 8122   GB/T 6467   

Basic data

Standard ID GB/T 6468-2010 (GB/T6468-2010)
Description (Translated English) The helix artifact of gear
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J42
Classification of International Standard 17.040.30
Word Count Estimation 10,143
Date of Issue 1/10/2011
Date of Implementation 10/1/2011
Older Standard (superseded by this standard) GB/T 6468-2001
Quoted Standard GB/T 10095.1-2008; GB/T 17163-2008,
Regulation (derived from) Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the terms and definitions gear helix model, the type and basic parameters, requirements, and other test methods, marking and packaging. This Standard is applicable to the base circle radius rb is not more than 200mm, Face to involute of one and two gear helix model.

GB/T 6468-2010: The helix artifact of gear

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
The helix artifact of gear ICS 17.040.30 J42 National Standards of People's Republic of China Replacing GB/T 6468-2001 Gear helix model Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 6468-2001 "gear helix model." This standard and GB/T 6468-2001 compared to the main changes are as follows. --- Redefined related terms; --- Level 1 model surface roughness increased from 0.2μm to 0.1μm; --- 4.1 inject to allow helix Level 1 model plane perpendicular to the central axis direction, the presence of less than half a tooth profile of the groove or Since the instrument for detecting and filtering effect of frequency response characteristics; --- Top hole surface roughness is reduced from 0.1μm to 0.2μm; --- Top hole cone angle template Technical indicators reference to the requirements; --- 5.4, increasing the helix angle of deviation; --- 6.4, increasing the helix angle deviation detection method; --- Combined the original standard Chapter 5, "technical requirements" and Chapter 6, "other requirements" content; --- Original standard Chapter 7, "acceptance principle" to Chapter 6, "Test Method." The standard proposed by China Machinery Industry Federation. The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized. This standard is drafted by. China Institute of Metrology. Participated in the drafting of this Standard. China Institute of Metrology, Harbin Measuring & Cutting Tool Group Co., Ltd., Beijing Branch in Sunny Since Technologies Co., Ltd., Zhejiang Institute of Metrology, Ltd. Harbin precision of measuring instruments. The main drafters of this standard. Ming Cheng Qi, Dong Ying Jun, Zhang Heng, Li Rui, Sun Xiuwen, Chenxian Min, Chen Hongan, Mao Zhenhua, according to Xu dry, Wei Tianshui. This standard replaces the standards previously issued as follows. --- GB/T 6468-1986, GB/T 6468-2001. Gear helix model

1 Scope

This standard specifies the terms and definitions of gear helix model, type and basic parameters, requirements, and other test methods, marking and packaging. Hereinafter referred to as "model"). Note. Non-involute gear helix model may refer to this standard.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 10095.1-2008 Cylindrical gear accuracy system - Part 1. Definitions tooth surface deviation and ipsilateral tooth allowable value (ISO 1328-1.1995, IDT) GB/T 17163-2008 dimensional measuring instruments - Basic terminology

3 Terms and Definitions

GB/T 17163-2008, GB/T 10095.1-2008 established in the following terms and definitions apply to this standard. 3.1 Calibration of measuring instruments of all kinds of spiral standard measurement equipment, mainly used for transmission gear helix parameter value, and indeed correction instrument indication Given instrument indication error. 3.2 When the plane along a fixed cylindrical surface (cylindrical surface yl) pure rolling, a constant angle with the base of the cylinder axis on the plane Tilt staggered straight line into a fixed spatial trajectory surface (see Figure 1). Figure 1 involute 3.3 When fixed points along the cylindrical surface of a bus for constant movement, and the bus turn around the axis of the cylindrical surface of constant angular velocity rotation, fixed points

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6468-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6468-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6468-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6468-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6468-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6468-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.