|
US$544.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6104.2-2022: Industrial trucks - Vocabulary - Part 2: Fork arms and attachments
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6104.2-2022 | English | 544 |
Add to Cart
|
5 days [Need to translate]
|
Industrial trucks - Vocabulary - Part 2: Fork arms and attachments
| Valid |
GB/T 6104.2-2022
|
PDF similar to GB/T 6104.2-2022
Basic data | Standard ID | GB/T 6104.2-2022 (GB/T6104.2-2022) | | Description (Translated English) | Industrial trucks - Vocabulary - Part 2: Fork arms and attachments | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J83 | | Classification of International Standard | 53.060 | | Word Count Estimation | 30,364 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2022-12-30 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 6104.2-2022: Industrial trucks - Vocabulary - Part 2: Fork arms and attachments---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 53.060
CCSJ83
National Standards of People's Republic of China
Industrial vehicle terminology part 2. forks and attachments
(ISO 5053-2.2019, IDT)
Posted on 2022-12-30
2022-12-30 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
Appendix A (informative) Load type and manipulation mode 20
Reference 24
index 25
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is Part 2 of GB/T 6104 "Terms for Industrial Vehicles". GB/T 6104 has issued the following parts.
--- Part 1.Types of industrial vehicles;
--- Part 2.Forks and attachments.
This document is equivalent to ISO 5053-2.2019 "Terms for Industrial Vehicles Part 2.Forks and Attachments".
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Industrial Vehicle Standardization Technical Committee (SAC/TC332).
This document is drafted by. Longhe Intelligent Equipment Manufacturing Co., Ltd., Beijing Lifting and Transportation Machinery Design and Research Institute Co., Ltd., Linde (China
China) Forklift Co., Ltd., Noli Intelligent Equipment Co., Ltd., Anhui Heli Co., Ltd., Hangzhou Hangcha Kangli Forklift Accessories Co., Ltd.
Division, Ningbo Ruyi Co., Ltd., Anqing Liandong Accessories Co., Ltd., Zhejiang Jiali Storage Equipment Co., Ltd.
The main drafters of this document. Yang Jing, Wang Dan, Shi Yuanfang, Zhao Chunhui, Zhuang Zhimei, Liu Zigang, Du Xiaoli, Yang Hongyu, Zhang Yaoyao, Fang Kai,
Wang Jun.
Introduction
Forks and attachments have unique structures and special functions, which are good tools for multi-purpose forklifts. With the continuous development of the logistics industry
With the development, forks and attachments have been widely popularized. The formulation of this document is conducive to the integration of my country's fork and attachment products with international standards, and promotes my country's
Technological exchanges with countries around the world and the promotion of international trade reduce the occurrence of ambiguity.
GB/T 6104 aims to establish and standardize the terms and definitions in the field of industrial vehicles. GB/T 6104 is proposed to consist of four parts.
--- Part 1.Types of industrial vehicles;
--- Part 2.Forks and attachments;
--- Part 3.Accessories and components;
--- Part 4.Operational and descriptive terms.
This document deals only with terms and definitions for industrial vehicle forks and attachments.
Industrial vehicle terminology part 2. forks and attachments
1 Scope
This document defines the terms fork and load handling equipment.
This document does not specify safety requirements for forks and load handling equipment.
The term "attachment" in this document describes a device mounted on an industrial vehicle that allows the lifting system to be used in other ways.
Note. This document does not give any advice on which attachment is suitable for which load.
2 Normative references
This document has no normative references.
3 Terms and Definitions
The following terms and definitions apply to this document.
Note. Since there are differences among various types of attachments and new product combinations are constantly being developed, it is impossible to explain all the differences of each type of attachments.
Typical differences thereof are therefore defined, illustrated and/or described.
3.1
Fork fork arm
The horizontal section is cantilevered from the vertical section, which provides the means of mounting on the fork frame (such as bolt type, shaft mount type, hook type). usually safe
Two or more forks are used for handling loads (eg pallet loads).
Note. See Figure 1.
Figure 1 fork
3.2
detachable attachment removeableattachment
Attachment installed by the user or the manufacturer on the fork frame or fork of an industrial vehicle to allow another way to use the lifting system and
Can be restored to standard configuration. Installation or removal of such attachments does not require disassembly of any part of the hoisting system.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6104.2-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 6104.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6104.2-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6104.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|