|
US$619.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45632-2025: Digital aerophotogrammetry - Control survey specifications
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45632-2025 | English | 619 |
Add to Cart
|
5 days [Need to translate]
|
Digital aerophotogrammetry - Control survey specifications
| Valid |
GB/T 45632-2025
|
PDF similar to GB/T 45632-2025
Basic data | Standard ID | GB/T 45632-2025 (GB/T45632-2025) | | Description (Translated English) | Digital aerophotogrammetry - Control survey specifications | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A77 | | Classification of International Standard | 07.040 | | Word Count Estimation | 30,385 | | Date of Issue | 2025-04-25 | | Date of Implementation | 2025-08-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 45632-2025: Digital aerophotogrammetry - Control survey specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 07.040
CCSA77
National Standard of the People's Republic of China
Specification for control measurement of digital aerial photogrammetry
Released on 2025-04-25
2025-08-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 2
5 General 3
5.1 Mathematical foundations 3
5.2 Basic control points 3
5.3 Image Control Point 3
5.4 Aerial data 4
5.5 Instruments and Equipment 4
6 Preparation 5
6.1 Data Collection 5
6.2 Survey area exploration 5
6.3 Data Analysis 5
6.4 Technical Design 6
7 Image Control Point Layout 6
7.1 Layout 6
7.2 Layout regulations 6
7.3 Regional network layout 7
7.4 Single route layout 12
8 Image control point measurement 13
8.1 Field Image Control Point Measurement 13
8.2 Graphical image control point measurement 16
9 Control results record and mark 16
9.1 Control point number and results table 16
9.2 Control point marking 17
9.3 Control Points 17
10 Quality Control17
10.1 Basic Provisions17
10.2 Process Quality Control 18
10.3 Quality Inspection and Acceptance of Results 19
11 Results collation and submission 19
11.1 Results Summary 19
11.2 Results Submission 19
Appendix A (Informative) Control Point Results Table 20
Appendix B (Informative) Control Points 21
Reference 22
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed by the Ministry of Natural Resources of the People's Republic of China.
This document is under the jurisdiction of the National Technical Committee for Geographic Information Standardization (SAC/TC230).
This document was drafted by. Surveying and Mapping Standardization Institute of the Ministry of Natural Resources, the Second Topographic Survey Team of the Ministry of Natural Resources, Shaanxi Surveying and Mapping Geographic Information
Bureau, Shaanxi Surveying and Mapping Product Quality Supervision and Inspection Station of the Ministry of Natural Resources, Wuhan University, Chinese Academy of Surveying and Mapping, First Aerial Survey and Remote Sensing
Institute of Informatics, the First Topographic Survey Team of the Ministry of Natural Resources, Wuhan Institute of Surveying and Mapping, China Municipal Engineering Central South Design and Research Institute Co., Ltd., Shaanxi
Tianrun Technology Co., Ltd., Guangzhou Urban Planning, Survey and Design Institute Co., Ltd., Shenzhen Geological Construction Engineering Co., Ltd., Feiyan Airlines
Remote Sensing Technology Co., Ltd., Xinchang County Geographic Information Center, Tianhua Innovation (Beijing) Standardization Technology Co., Ltd., Guangzhou Blueprint Geographic Information Technology Co., Ltd.
TECHNOLOGY LIMITED.
The main drafters of this document are. Wu Wei, Yan Jingxin, Wang Huanping, Xie Lurong, Zhao Wenpu, Deng Guoqing, Wang Xiaojun, Yuan Xiuxiao, Zhang Li, Zhao Yangang,
Chen Jie, Yuan Kun, Xin Anxian, Chen Weiping, Zhou Jian, Wang Xiang, Huang Zhihua, Zhang Eryan, Liu Yang, Xu Wei, Zhao Ziyan, Liu Weigang, Wang Xuwei, Zhou Jinwen,
Song Deqiang, Zhao Xiaoyang, Liu Yuqi, and Wang Zenan.
Introduction
At present, the entire process of digital aerial photogrammetry technology from aerial photography, control measurement, aerial triangulation to digital surveying and mapping results production has been extensively studied.
The process is based on digital images. Digital aerial photogrammetry uses digital aerial cameras, global navigation satellite systems, inertial measurement units, internal
Digital aerial photogrammetry technology has matured and has become an important method for producing surveying and mapping results.
It has been widely used in surveying and mapping, urban construction, land and engineering, and other fields. In addition, the current digital aerial photogrammetry generally adopts global navigation.
Satellite systems, positioning and attitude measurement systems, and inertial measurement units assist digital aerial photography to achieve rare ground-controlled mapping.
This document is to standardize the current digital aerial photogrammetry control measurement production technology and support digital aerial
It is formulated for photogrammetric control measurement work to promote the application of digital aerial photogrammetry technology.
This document is consistent with GB/T 27919 "Technical Specifications for IMU/GPS-Assisted Aerial Photography" and GB/T 27920.1 "Technical Specifications for Digital Aerial Photography".
GB/T 27920.2 "Digital Aerial Photography Specifications Part 2.Push-broom Digital Aerial Photography"
Photography", GB/T 23236 "Digital Aerial Photogrammetry Aerial Triangulation Specification", CH/T 3007.1 "Digital Aerial Photogrammetry Mapping
Specification Part 1.1.5001.10001.2000 Digital Elevation Model Digital Orthophoto Map Digital Line Drawing,
CH/T 3007.2 Specification for Digital Aerial Photogrammetry and Mapping Part 2.1.5000 1.10000 Digital Elevation Model Digital Orthogonal
Digital Line Drawing of Photogrammetry", CH/T 3007.3 Specification for Digital Aerial Photogrammetry and Mapping Part 3.1.25000
1.500001.100000 digital elevation model digital orthophoto map digital line drawing together to support digital aerial photography survey
A series of standards for quantity.
Specification for control measurement of digital aerial photogrammetry
1 Scope
This document specifies the general principles, preparation, image control point layout, image control point measurement, control
The results recording and marking, quality control, results compilation and submission, and the corresponding verification methods are described.
This document is applicable to the production of basic geographic information digital results using digital aerial photogrammetry methods at scales of 1.500, 1.1000,
1.2000, 1.5000, 1.10000, 1.25000, 1.50000 digital elevation model, digital surface model, digital orthophoto map,
Digital line drawings control the measurement phase of production operations.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 7931 1∶5001∶10001∶2000 Field specification for aerial photogrammetry of topographic maps
GB/T 12341 1∶250001∶500001∶100000 Field specification for aerial photogrammetry of topographic maps
GB/T 13977 1∶50001∶10000 Field specification for aerial photogrammetry of topographic maps
GB/T 18314 Global Navigation Satellite System (GNSS) Measurement Specification
GB/T 24356 Quality inspection and acceptance of surveying and mapping results
GB/T 27919 Technical Specification for IMU/GPS Assisted Aerial Photography
GB/T 27920.1 Specification for digital aerial photography Part 1.Frame-type digital aerial photography
GB/T 27920.2 Specification for digital aerial photography Part 2.Push-broom digital aerial photography
GB/T 39616-2020 Specification for real-time kinematic measurement (RTK) of satellite navigation and positioning base station network
CH/T 1001 Rules for the preparation of surveying and mapping technical summaries
CH/T 1004 Surveying and Mapping Technical Design Regulations
CH/T 1024 Technical Specification for Quality Inspection of Image Control Measurement Results
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Using aircraft, airships, balloons and other aerial vehicles as platforms, digital aerial cameras are used to take photographs at a height within the Earth's atmosphere.
The technology of photographing the earth's surface.
3.2
Adopting the principle of digital projection intersection, the digital aerial images are corrected and processed to measure the shape, size, spatial position, properties and
Technical approach to interrelationships.
|