|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45542-2025: Specification for integrated energy efficiency evaluation of industrial boilers
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45542-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Specification for integrated energy efficiency evaluation of industrial boilers
| Valid |
GB/T 45542-2025
|
PDF similar to GB/T 45542-2025
Basic data | Standard ID | GB/T 45542-2025 (GB/T45542-2025) | | Description (Translated English) | Specification for integrated energy efficiency evaluation of industrial boilers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J98 | | Classification of International Standard | 27.060.30 | | Word Count Estimation | 14,163 | | Date of Issue | 2025-03-28 | | Date of Implementation | 2025-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 45542-2025: Specification for integrated energy efficiency evaluation of industrial boilers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB/T 45542-2025 English version. Specification for integrated energy efficiency evaluation of industrial boilers
ICS 27.060.30
CCSJ98
National Standard of the People's Republic of China
Technical specification for comprehensive energy efficiency evaluation of industrial boilers
Released on 2025-03-28
2025-10-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 2
5 Evaluation Method 2
6 Comprehensive energy efficiency classification 5
7 Evaluation Report 6
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the National Technical Committee for Standardization of Boilers and Pressure Vessels (SAC/TC262).
This document was drafted by. China Special Equipment Testing and Research Institute, Fangkuai Boiler Co., Ltd., Guangzhou Special Equipment Testing and Research Institute, China Standards
Institute of Standardization, Harbin Institute of Technology, Huairou Laboratory Shanxi Research Institute, Xi'an Jiaotong University, Machinery Industry Technology Development Foundation, Shaanxi
Provincial Special Equipment Inspection and Testing Institute, Jiangsu Sifang Clean Energy Equipment Manufacturing Co., Ltd., Borite Thermal Energy Equipment Co., Ltd.,
Zhejiang Liju Thermal Equipment Co., Ltd., Taishan Group Co., Ltd., Kleden Thermal Equipment (Zhejiang) Co., Ltd., Shanghai Te
Special Equipment Supervision and Inspection Technology Research Institute, China Electronics Technology Standardization Institute, Zhejiang Special Equipment Science Research Institute, Anhui Special Equipment
Equipment Testing Institute, Zhejiang Tefu Development Co., Ltd., and Hunan Jijingyuan Energy Saving and Environmental Protection Technology Co., Ltd.
The main drafters of this document are. Liu Xuemin, Da Yaodong, Lu Haigang, Ma Kuo, Liu Ren, Gao Jianmin, Ke Xiwei, Du Yongbo, Hou Rui, Xu Ran, Yao Huanle,
Dong Kai, Wang Yongqiang, Li Changzheng, Sheng Yijun, Wang Huanan, Yu Jiming, Zhao Lihua, Cheng Defang, Ye Xiangrong, Wang Jing, Chang Yongqiang, Zhang Xiaoming, Xia Hongwei,
Qi Guoli, Lu Jie, Zhao Xingang, Li Peng, Wang Weipeng, and Chen Zhengyu.
Technical specification for comprehensive energy efficiency evaluation of industrial boilers
1 Scope
This document specifies the general requirements for the comprehensive energy efficiency evaluation of industrial boilers, describes the evaluation method and comprehensive energy efficiency classification, and gives
The contents of the evaluation report were released.
This document is applicable to solid fuel boilers and liquid fuel boilers with a rated pressure less than 3.8MPa and a medium of water or liquid organic heat carrier.
And the comprehensive energy efficiency evaluation of gas fuel boilers. Non-power generation steam boilers with rated steam pressure greater than or equal to 3.8MPa shall be implemented as a reference.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 1576 Industrial boiler water quality
GB/T 2900.48 Electrical terminology boiler
GB/T 5468 Boiler smoke test method
GB/T 10180 Thermal performance test procedures for industrial boilers
GB/T 12145 Steam quality for thermal power generating units and steam power equipment
GB/T 16157 Determination of particulate matter in exhaust gas from stationary sources and sampling methods for gaseous pollutants
GB 23971 Organic heat carrier
GB/T 24747 Safety technical requirements for organic heat carriers
HJ/T 42 Determination of nitrogen oxides in exhaust gas from stationary sources - Ultraviolet spectrophotometry
HJ/T 43 Determination of nitrogen oxides in exhaust gas from stationary sources - Naphthylethylenediamine hydrochloride spectrophotometric method
HJ/T 56 Determination of sulfur dioxide in exhaust gas from stationary sources - Iodine titration method
HJ57 Determination of sulfur dioxide in waste gas from stationary pollution sources - Constant potential electrolysis method
HJ75 Technical Specification for Continuous Monitoring of Flue Gas (SO2, NOx, Particulate Matter) Emissions from Stationary Pollution Sources
HJ76 Technical requirements and detection methods for continuous monitoring system of flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
HJ/T 373 Technical Specification for Quality Assurance and Quality Control of Stationary Pollution Source Monitoring (Trial)
HJ/T 397 Technical Specification for Stationary Source Exhaust Gas Monitoring
HJ629 Determination of sulfur dioxide in waste gas from stationary pollution sources - Non-dispersive infrared absorption method
HJ692 Determination of nitrogen oxides in waste gas from stationary pollution sources - Non-dispersive infrared absorption method
HJ693 Determination of nitrogen oxides in waste gas from stationary pollution sources - Constant potential electrolysis method
HJ836 Gravimetric method for determination of low concentration particulate matter in waste gas from stationary pollution sources
NB/T 47034 Technical requirements for industrial boilers
NB/T 47066 Test methods for thermal performance of condensing boilers
3 Terms and definitions
The terms and definitions defined in GB/T 2900.48, GB/T 10180 and NB/T 47034 and the following apply to this document.
|