|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43924.2-2024: Aerospace - MJ threads - Part 2: - Limit dimensions for bolts and nuts
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43924.2-2024 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Aerospace - MJ threads - Part 2: - Limit dimensions for bolts and nuts
| Valid |
GB/T 43924.2-2024
|
PDF similar to GB/T 43924.2-2024
Basic data | Standard ID | GB/T 43924.2-2024 (GB/T43924.2-2024) | | Description (Translated English) | Aerospace - MJ threads - Part 2: - Limit dimensions for bolts and nuts | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V20 | | Classification of International Standard | 21.040.10 | | Word Count Estimation | 14,177 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-08-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43924.2-2024: Aerospace - MJ threads - Part 2: - Limit dimensions for bolts and nuts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 21:040:10
CCSV20
National Standards of People's Republic of China
Aerospace MJ threads Part 2:
Limit sizes of bolt and nut threads
(ISO 5855-2:1999,MOD)
Released on 2024-04-25
2024-08-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
This document is part 2 of GB/T 43924 Aerospace MJ Thread: GB/T 43924 has been published in the following parts:
--- Part 1: General requirements;
--- Part 2: Limit dimensions of bolt and nut threads;
--- Part 3: Limit dimensions of threads for fluid system piping components:
This document is modified to adopt ISO 5855-2:1999 "Aerospace MJ threads Part 2: Limit dimensions of bolt and nut threads
inch":
A new chapter “Terms and Definitions” has been added to this document:
The technical differences between this document and ISO 5855-2:1999 and their reasons are as follows:
--- ISO 965-1 (see 7:1 and 7:2) has been replaced by the normative reference GB/T 197 to adapt to my country's technical conditions and increase the
Operability:
The following editorial changes were made to this document:
--- Replaced ISO 5855-1:1999 with the informative reference GB/T 43924:1-2024 (see 7:1, 7:2 and 7:3);
---Added references:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document was proposed and coordinated by the National Aircraft Standardization Technical Committee (SAC/TC435):
This document was drafted by: China Aviation Technology Research Institute, AVIC General Aviation South China Aircraft Industry Co:, Ltd:, and China Aviation Industry Corporation
Xi'an Aircraft Design and Research Institute, Chengdu Aircraft Industry (Group) Co:, Ltd:, China Aviation Industry Corporation Luoyang Electro-Optical Equipment Research Institute
Institute, AVIC Xi'an Aircraft Industry Group Co:, Ltd:, Shenyang Aircraft Industry (Group) Co:, Ltd:, China Aviation Industry Corporation Shenyang
Yang Aircraft Design Institute, Shenyang Hangsheng Technology Co:, Ltd:
The main drafters of this document are: Ren Haitao, Yin Zhenbo, Miao Shengpei, Liu Zhanping, Qu Zhi, Dai Ying, He Zhiying, Zhang Shuang, Ren Xiujun, He Junwei,
Liu Hui, Meng Encheng, and Zhang Ming:
Introduction
GB/T 43924 "Aerospace MJ Thread" is intended to consist of three parts:
--- Part 1: General requirements: The purpose is to specify the thread type and its dimensions, tolerances, markings, calculation specifications of MJ threads for aerospace applications:
Formula, etc:
--- Part 2: Limit dimensions of bolt and nut threads: The purpose is to specify the limits of bolts with a nominal diameter of 1:6 mm to 39 mm:
And the MJ thread limit size of the nut:
--- Part 3: Limit sizes of threads for fluid system pipe fittings: The purpose is to specify the MJ for aerospace fluid system pipe fittings:
Limiting thread size:
In the design of aviation and spacecraft, in order to reduce the volume and make the parts structure as compact as possible, and to withstand the impact force environment,
Therefore, the threads used in structural connections have high fatigue strength and long fatigue life:
The root radius of the thread and the flattening amount of the inner thread minor diameter, the outer thread root is an arc transition, which meets the requirements of impact load and high fatigue:
It has been widely used in the aerospace field: This document improves the standards for basic fasteners of my country's aerospace products:
Aerospace MJ threads Part 2:
Limit sizes of bolt and nut threads
1 Scope
This document specifies the maximum dimensions of MJ threads for bolts and nuts with nominal diameters ranging from 1:6 mm to 39 mm:
This document applies to the design, production and use of aerospace MJ threaded bolts and nuts:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 197 General thread tolerances (GB/T 197-2018, ISO 965-1:2013, MOD)
3 Terms and definitions
There are no terms or definitions that require definition in this document:
4 Nominal diameter and thread pitch
Nominal diameter and thread pitch are shown in Table 1:
Table 1 Nominal diameter and thread pitch
Unit is mm
Nominal diameter (d or D) Pitch (P) Nominal diameter (d or D) Pitch (P)
1:6
2:5
3:5
0:35
0:4
0:45
0:5
1:5
0:7
0:8
1:25
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43924.2-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43924.2-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43924.2-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43924.2-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|