|
US$999.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43924.1-2024: Aerospace - MJ threads - Part 1: General requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43924.1-2024 | English | 999 |
Add to Cart
|
7 days [Need to translate]
|
Aerospace - MJ threads - Part 1: General requirements
| Valid |
GB/T 43924.1-2024
|
PDF similar to GB/T 43924.1-2024
Basic data | Standard ID | GB/T 43924.1-2024 (GB/T43924.1-2024) | | Description (Translated English) | Aerospace - MJ threads - Part 1: General requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V20 | | Classification of International Standard | 21.040.10 | | Word Count Estimation | 50,590 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-08-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43924.1-2024: Aerospace - MJ threads - Part 1: General requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 21:040:10
CCSV20
National Standards of People's Republic of China
Aerospace MJ Thread
Part 1: General requirements
(ISO 5855-1:1999,MOD)
Released on 2024-04-25
2024-08-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Basic tooth type 1
5 Position and shape of solid tooth profile 4
6 Tolerance 7
7 Limit size 7
8 Combinations of nominal diameter and thread pitch 7
9 Mark 7
10 Calculation formula 8
Reference 43
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
This document is part 1 of GB/T 43924 Aerospace MJ Thread: GB/T 43924 has been published in the following parts:
--- Part 1: General requirements;
--- Part 2: Limit dimensions of bolt and nut threads;
--- Part 3: Limit dimensions of threads for fluid system piping components:
This document is modified to adopt ISO 5855-1:1999 "Aerospace MJ threads - Part 1: General requirements":
The technical differences between this document and ISO 5855-1:1999 and their reasons are as follows:
--- Replaced ISO 965-1:1998 with the normative reference GB/T 197 (see 6:1, 6:3, 10:1 and 10:2):
The degree of consistency is modified to adapt to my country's technical conditions and increase operability:
The following editorial changes were made to this document:
---Change 0:42535 in Table 1 to 0:42435, and calculate according to the coefficients in the table: 0:56580P=0:56580×0:75=
0:42435, ISO 5855-1:1999 calculation result is wrong;
---Change dmax=d-es in 10:1 to dmax=d es, es is the upper deviation of the external thread diameter, thread accuracy e, f, g, h
When es≤0, dmax=d es, the formula of ISO 5855-1:1999 is incorrect;
---Added references:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document is proposed and coordinated by the National Aircraft Standardization Technical Committee (SAC/TC435):
This document was drafted by: China Aviation Technology Research Institute, Shenyang Aircraft Design and Research Institute of China Aviation Industry Corporation,
Xi'an Aircraft Design and Research Institute of Aircraft Industry Group Corporation, Chengdu Aircraft Industry (Group) Co:, Ltd:, AVIC Xi'an Aircraft Industry Group Co:, Ltd:
Co:, Ltd:, Shenyang Aircraft Industry (Group) Co:, Ltd:, China Aviation Industry Corporation Luoyang Electro-Optical Equipment Research Institute, Shenyang Hangsheng Technology
Ltd:
The main drafters of this document are: Yin Zhenbo, Sun Zhixiao, Ren Haitao, Miao Shengpei, Liu Zhanping, He Junwei, He Zhiying, Dai Ying, Zhang Shuang, Zhang Wenwen,
Ren Xiujun, Jiang Zhihua, Li Guangjun, Zhang Ming, Zhang Zhe, and Liu Yun:
Introduction
GB/T 43924 "Aerospace MJ Thread" is intended to consist of three parts:
--- Part 1: General requirements: The purpose is to specify the thread type and its dimensions, tolerances, markings, calculation specifications of MJ threads for aerospace applications:
Formula, etc:
--- Part 2: Limit dimensions of bolt and nut threads: The purpose is to specify the limits of bolts with a nominal diameter of 1:6 mm to 39 mm:
And the MJ thread limit size of the nut:
--- Part 3: Limit sizes of threads for fluid system pipe fittings: The purpose is to specify the MJ for aerospace fluid system pipe fittings:
Limiting thread size:
In the design of aviation and spacecraft, in order to reduce the volume and make the parts structure as compact as possible, and to withstand the impact force environment,
Therefore, the threads used in structural connections have high fatigue strength and long fatigue life:
The root radius of the thread and the flattening amount of the inner thread minor diameter, the outer thread root is an arc transition, which meets the requirements of impact load and high fatigue:
It has been widely used in the aerospace field: This document improves the standards for basic fasteners of my country's aerospace products:
Aerospace MJ Thread
Part 1: General requirements
1 Scope
This document specifies the general requirements for MJ threads used in aerospace products:
This document specifies the basic tooth profile of MJ thread and gives the diameter and pitch combination series:
300mm thread, this document provides the basic dimensions and tolerances of diameter and pitch in table form:
This document provides methods for calculating dimensions and tolerances for threads with numerical pitch values, including threads with diameters exceeding 300 mm:
For the limit sizes of bolts and nuts with nominal diameters of 1:6 mm to 39 mm, see GB/T 43924:2-2024:
For the limit sizes of grooves, see GB/T 43924:3-2024:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 197 General thread tolerances (GB/T 197-2018, ISO 965-1:2013, MOD)
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
Basic profile
The theoretical tooth profile, in the axial plane, corresponds to the basic dimensions of the thread (excluding tolerances), namely the major diameter, the middle diameter and the minor diameter:
see picture 1:
4 Basic tooth types
4:1 Code
see picture 1:
4:2 Dimensions
The basic tooth profile dimensions are shown in Figure 1 and Table 1:
The basic deviation should match the basic size:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43924.1-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43924.1-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43924.1-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43924.1-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|