Path: Home > GB/T > Page537 > GB/T 43333-2023 Home > Standard_List > GB/T > Page537 > GB/T 43333-2023
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43333-2023 | English | 289 |
Add to Cart
|
3 days [Need to translate]
|
Specification for commissioning and acceptance of stand-alone microgrid
| Valid |
GB/T 43333-2023
|
PDF similar to GB/T 43333-2023
Basic data | Standard ID | GB/T 43333-2023 (GB/T43333-2023) | | Description (Translated English) | Specification for commissioning and acceptance of stand-alone microgrid | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | F19 | | Classification of International Standard | 29.240 | | Word Count Estimation | 14,172 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43333-2023: Specification for commissioning and acceptance of stand-alone microgrid---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:240
CCSF19
National Standards of People's Republic of China
Standards for debugging and acceptance of independent microgrids
Published on 2023-12-28
2024-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 General requirements 2
5 points system debugging 2
6 Joint debugging 4
7 Trial run 5
8 Acceptance 6
Appendix A (informative) Acceptance information 7
Appendix B (informative) Acceptance items and methods 8
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by the China Electricity Council:
This document is under the jurisdiction of the National Microgrid and Distributed Power Grid Integration Standardization Technical Committee (SAC/TC564):
This document was drafted by: State Grid Shanghai Energy Internet Research Institute Co:, Ltd:, China Electric Power Research Institute Co:, Ltd:, State Grid Zhejiang
Electric Power Research Institute of Provincial Electric Power Co:, Ltd:, Electric Power Research Institute of State Grid Shandong Electric Power Co:, Ltd:, State Grid Fujian Electric Power Co:, Ltd:,
Hunan Electric Power Co:, Ltd:, State Grid Nari Technology Co:, Ltd:, Electric Power Research Institute of State Grid Hunan Electric Power Co:, Ltd:, State Grid
Hubei Electric Power Co:, Ltd: Electric Power Research Institute, Xinjiang Goldwind Technology Co:, Ltd:, State Grid Jiangsu Integrated Energy Services Co:, Ltd:,
Xi'an Xuji Power Electronics Technology Co:, Ltd:, State Grid Zhejiang Electric Power Co:, Ltd: Jiaxing Power Supply Company:
The main drafters of this document: Ji Yu, Sun Lijing, Liu Haitao, Lu Guangxian, Yu Hui, Wu Ming, Hou Yiming, Zhang Xuesong, Sun Shumin, Zhang Leiqi,
Yu Peng, Huang Xinghua, Liu Shaohua, Zhou Kehui, Wu Xiaozhong, Zhang Wei, Lin Shengjie, Zhou Miao, Fan Yuanliang, Wang Lin, Zhou Xianwei, Shen Yu, Zhang Yingyuan, Tang Haiguo,
Wang Jun, Kou Lingfeng, Gao Bo, Zhang Hai, Liu Guoyu, Wei Chen, Niu Geng, Qian Weijie:
Standards for debugging and acceptance of independent microgrids
1 Scope
This document stipulates distributed power generation, energy storage, power transformation and distribution, relay protection and safety automatic devices, monitoring, metering, etc: in independent microgrids
Debugging items and methods for sub-system debugging and joint debugging, as well as trial operation and acceptance requirements:
This document is applicable to the debugging and acceptance of independent microgrids:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 12325 Power quality supply voltage deviation
GB/T 12326 Power quality voltage fluctuation and flicker
GB/T 14048:2 Low-voltage switchgear and control equipment Part 2: Circuit breakers
GB/T 14549 Power Quality Public Grid Harmonics
GB/T 15543 Power quality three-phase voltage imbalance
GB/T 15945 Power quality power system frequency deviation
GB/T 19960:2 Wind turbines Part 2: General test methods
GB/T 20136 General test methods for internal combustion engine power stations
GB/T 20297 Static Var Compensation Device (SVC) Field Test
GB 26859 Electrical safety work procedures for power lines
GB 26860 Electrical Safety Work Procedures Electrical Parts of Power Plants and Substations
GB/T 31365 Detection procedures for photovoltaic power stations connected to the power grid
GB/T 33589 Technical regulations for microgrid access to power systems
GB/T 36270 Microgrid monitoring system technical specifications
GB/T 36274 Microgrid energy management system technical specifications
GB/T 38953 Technical regulations for microgrid relay protection
GB/T 42737 Commissioning procedures for electrochemical energy storage power stations
GB 50054 Low-voltage power distribution design specifications
GB 50148 Specifications for construction and acceptance of power transformers, oil-immersed reactors, and transformers in electrical installation installation projects
GB 50149 Specification for construction and acceptance of busbar devices in electrical installation installation projects
GB 50150 Standard for handover test of electrical equipment for electrical installation installation projects
GB 50168 Cable line construction and acceptance standards for electrical installation installation projects
GB 50173 Specifications for construction and acceptance of overhead power lines of 66kV and below for electrical installation installation projects
GB 50254 Specifications for construction and acceptance of low-voltage electrical appliances in electrical installation installation projects
GB/T 51338 Debugging and acceptance standards for distributed power grid-connected projects
GB/T 51341 Microgrid engineering design standards
DL/T 584 3kV~110kV power grid relay protection device operation and setting procedures
Price & DeliveryUS$289.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43333-2023: Specification for commissioning and acceptance of stand-alone microgrid
Status: Valid
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43333-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 43333-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43333-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43333-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |