|
US$739.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42783-2023: Integrity management of units
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 42783-2023 | English | 739 |
Add to Cart
|
6 days [Need to translate]
|
Integrity management of units
| Valid |
GB/T 42783-2023
|
PDF similar to GB/T 42783-2023
Basic data | Standard ID | GB/T 42783-2023 (GB/T42783-2023) | | Description (Translated English) | Integrity management of units | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J74 | | Classification of International Standard | 23.020.30 | | Word Count Estimation | 36,348 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-05-23 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 42783-2023: Integrity management of units---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 23:020:30
CCSJ74
National Standards of People's Republic of China
Plant Integrity Management
Released on 2023-05-23
2023-05-23 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 2
5 Principles and elements of integrity management 3
6 Policy and strategy 7
7 Goals and plans8
8 Organizational Structure, Responsibilities 8
9 Capabilities and Qualifications 9
10 Communication 9
11 skills training 10
12 Change Management 10
13 Information Management 11
14 Records and Document Management12
15 Risk Management 12
16 Quality Control 22
17 INSPECTION, TESTING AND PREVENTIVE MAINTENANCE 24
18 Failure Management 26
19 Emergency management 28
20 Decommissioning and scrapping 29
21 Performance Evaluation and Continuous Improvement 29
Reference 31
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the National Standardization Technical Committee of Boilers and Pressure Vessels (SAC/TC262):
This document is drafted by: Hefei General Machinery Research Institute Co:, Ltd:, China Petrochemical Corporation, China Special Equipment Inspection
Research Institute, Sinopec Qingdao Refining and Chemical Co:, Ltd:, Fujian United Petrochemical Co:, Ltd:, National Pipeline Group Eastern Crude Oil Reserve
Transport Co:, Ltd:, Shanghai Special Equipment Supervision and Inspection Technology Research Institute, PetroChina Sichuan Petrochemical Co:, Ltd:, PetroChina
Co:, Ltd: Urumqi Petrochemical Branch, Sinopec Zhenhai Refining and Chemical Branch:
The main drafters of this document: Chen Wei, Hu Jiushao, He Chenghou, Xie Guoshan, Liu Cheng, Yang Pengfei, Dong Jie, Li Zhifeng, Shao Shanshan, Han Ye,
Cheng Sixiang, Dai Cheng, Tang Xiaoying, Cui Guobiao, Zhou Yang, Kong Xinjun, Chen Zhongguan:
Introduction
This document is based on the PAS55 asset management standard of the British Standards Institution, the Center for Chemical Process Safety (CCPS) of the American Institute of Chemical Engineers
"Guidelines for Asset Integrity Management" and the ISO 55000 international asset management standard family as a reference, drawing on Sinopec, PetroChina, the national pipeline network, etc:
Based on the excellent experience in plant integrity management, it is compiled based on the basic national conditions of my country's petrochemical equipment integrity management: this document
It standardizes the content, main technical methods and requirements of the integrity management of the complete set of equipment, and clarifies the risk management of the whole life cycle of the complete set of equipment:
Supporting technologies, application conditions, and analysis procedures provide a basis for enterprises to carry out integrity management of complete sets of equipment under the guidance of factory integrity management:
It is of great significance to ensure the safe, economical and efficient operation of the complete set of equipment:
Plant Integrity Management
1 Scope
This document specifies the static equipment (pressure vessels, atmospheric storage tanks, industrial pipelines, furnace tubes, valves, etc:)
Contents, methods and requirements of life cycle integrity management of dynamic equipment (pumps, compressors, fans, etc:), instrumentation systems, and electrical equipment, including
Integrity management content of equipment design, manufacturing and installation, commissioning and operation, decommissioning and scrapping:
This document is applicable to the integrity management of oil refining, chemical, and coal chemical complete sets of equipment, as well as the integrity management of oil and gas gathering stations and oil reserve bases:
Can refer to use:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 150 (all parts) pressure vessels
GB/T 19624 Safety assessment of pressure vessels with defects in use
GB/T 20438 (all parts) Functional safety of electrical/electronic/programmable electronic safety-related systems
GB/T 21109 (all parts) Functional safety of safety instrumented systems in the process industry
GB/T 26610 (all parts) Implementation guidelines for risk-based inspection of pressure equipment systems
GB/T 29639 Guidelines for the preparation of emergency plans for production safety accidents in production and business units
GB/T 30578 Risk-based inspection and evaluation of atmospheric storage tanks
GB/T 30579 Damage Pattern Recognition of Pressure Equipment
GB/T 32857 Application Guidelines for Layer of Protection Analysis (LOPA)
GB/T 35013 Fitness-for-service evaluation of pressure equipment
GB/T 35320 Hazard and Operability Analysis (HAZOP Analysis) Application Guide
GB/T 37327 Atmospheric Storage Tank Integrity Management
SY/T 5921 Specification for operation, maintenance and repair of vertical cylindrical steel welded oil tanks
3 Terms and Definitions
The following terms and definitions apply to this document:
3:1
Complete set of integrated units
In the oil refining, chemical and coal chemical industries, process equipment, industrial pipelines, instruments, electrical appliances that process raw materials into chemical products through technological processes
System combination of gas equipment:
3:2
Integrity
Comprehensive attributes that reflect that the complete set of devices is complete in structure and function, in a safe and reliable controlled state, and conforms to expected functions:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42783-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42783-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 42783-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42783-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|