|
US$349.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41724-2022: Edge intelligence gateway architecture of cloud manufacturing service platform
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41724-2022 | English | 349 |
Add to Cart
|
4 days [Need to translate]
|
Edge intelligence gateway architecture of cloud manufacturing service platform
| Valid |
GB/T 41724-2022
|
PDF similar to GB/T 41724-2022
Basic data | Standard ID | GB/T 41724-2022 (GB/T41724-2022) | | Description (Translated English) | Edge intelligence gateway architecture of cloud manufacturing service platform | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J07 | | Word Count Estimation | 18,163 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41724-2022: Edge intelligence gateway architecture of cloud manufacturing service platform---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Edge intelligence gateway architecture of cloud manufacturing service platform
ICS 35.240.50
CCSJ07
National Standards of People's Republic of China
Cloud manufacturing service platform edge intelligent gateway architecture
Published on 2022-10-12
2023-05-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface III
1 Scope 1
2 Normative references 1
3 Terms, Definitions and Abbreviations 1
3.1 Terms and Definitions 1
3.2 Abbreviations 2
4 Functional Architecture and Component Requirements of Edge Intelligent Gateway 2
4.1 Functional Architecture Requirements 2
4.2 Communication and Drive Functional Component Requirements 3
4.3 Configuration Tool Requirements 3
4.4 Requirements for edge data applications4
4.5 Interface Protocol Requirements 4
5 Basic Architecture Requirements 4
5.1 Basic architecture for accessing sensor data4
5.2 Basic architecture for accessing device data5
5.3 Basic Architecture for Edge Computing5
6 Basic Data Type Requirements 6
7 Data Interface Requirements7
7.1 Collection point data format 7
7.2 Packaging method for uploading from collection points 7
7.3 Frequency of data upload7
7.4 Real-time data acquisition interface specification 7
7.5 Interface Specification for Data Collection of Running Status 8
8 Data Exchange Specification 10
Appendix A (Informative) Example 11 of IOT Call Interface Passing Parameters
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Automation System and Integration Standardization Technical Committee (SAC/TC159).
This document is drafted by. Beijing Aerospace Intelligent Manufacturing Technology Development Co., Ltd., Tsinghua University, Guangzhou Jizhiyun Internet of Things Technology Co., Ltd.,
Guizhou Aerospace Cloud Network Technology Co., Ltd., Beijing Machinery Industry Automation Research Institute Co., Ltd., Harbin Institute of Technology, Nanjing University of Aeronautics and Astronautics
Science, Aerospace Information Co., Ltd., Beijing General Research Institute of Electronic Engineering, Beihang University, Weiqiao National Science (Binzhou) Science and Engineering Industry
Industrial Technology Research Institute Co., Ltd., Aerospace Precision Co., Ltd., Beijing Satellite Environmental Engineering Research Institute, Wuhan Customs of the People's Republic of China,
Industrial Cloud Manufacturing (Sichuan) Innovation Center Co., Ltd., Jiangsu Yibang Power Technology Co., Ltd., Xi'an Jiaotong University, Chinese Academy of Sciences Microelectronics
Research Institute, Sichuan Digital Economy Industry Research Institute, Beijing Tie Niu Technology Co., Ltd.
The main drafters of this document. Yang Lingyun, Shi Wei, Zhao Qianchuan, Yang Wen, Huang Yi, Zhou Zhenhao, Tang Dunbing, Zou Ping, Gu Mu, Xing Yan, Zhang Changfu,
Yu Wentao, Lin Lin, Wang Haidan, Nie Zilin, Zhu Haihua, Li Longfei, Lin Zhongliang, Shi Jiao, Fu Hao, Shi Guoqiang, Guo Liqin, Zhang Hua, Zhou Wei, Ma Katie,
Xu Peiyan, Yan Yun, Zeng Ming, Liu Botao, Song Xiao, Wang Yifan, Yan Chaobo, Gao Chao, Zhang Meng, Niu Yousheng.
Cloud manufacturing service platform edge intelligent gateway architecture
1 Scope
This document specifies the basic functional architecture, functional components and the interface relationship between the edge intelligent gateway products of the cloud manufacturing service platform.
This document applies to the design and development of edge intelligent gateways for cloud manufacturing service platforms.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 29826-2013 Cloud Manufacturing Terminology
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
The terms and definitions defined in GB/T 29826-2013 and the following apply to this document.
3.1.1
Comprehensive use of edge computing, industrial data intelligent analysis technology, data acquisition, data adaptive protocol adaptation and conversion, data model
Edge-side industrial equipment with functions such as intelligent analysis.
3.1.2
identificationdata
Describes the data that identifies the basic situation in order to meet the needs of equipment management.
3.1.3
running data operatingdata
Describes the raw data generated during the control and operation of equipment.
3.1.4
eventdata eventdata
During the control and operation of the equipment, the alarm events, message events, etc. generated after the logical processing of the original data inside the equipment
data.
3.1.5
business data
In the process of equipment control and operation, after logical processing of the original data in the equipment, it can characterize its production and business conditions.
data.
3.1.6
Describe the test instructions and test data required during the debugging and maintenance of the equipment.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41724-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41724-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41724-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41724-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|