|
US$399.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41158.6-2022: [Renamed to GB/T41923] Three-dimensional process planning for mechanical products - Part 6: Data requirements
Status: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41158.6-2022 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
[Renamed to GB/T41923] Three-dimensional process planning for mechanical products - Part 6: Data requirements
| Obsolete |
GB/T 41158.6-2022
|
PDF similar to GB/T 41158.6-2022
Basic data | Standard ID | GB/T 41158.6-2022 (GB/T41158.6-2022) | | Description (Translated English) | [Renamed to GB/T41923] Three-dimensional process planning for mechanical products - Part 6: Data requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Word Count Estimation | 10,167 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41158.6-2022: [Renamed to GB/T41923] Three-dimensional process planning for mechanical products - Part 6: Data requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Three-dimensional process planning for mechanical products - Part 6.Data requirements
ICS 01.100.01
CCSJ04
National Standards of People's Republic of China
3D process design of mechanical products
PART 6.DATA REQUIREMENTS
Part 6.Datarequirements
Published on 2022-03-09
2022-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Classification of data 1
5 General Requirements 1
6 Data requirements in the design stage of the process plan 2
7 Data requirements for routing design stage 3
8 Data requirements for process detailed design stage 3
9 Data requirements for process release stage 4
10 Data Management Requirements 4
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is part 6 of GB/T 41158 "Three-dimensional process design of mechanical products". GB/T 41158 has released the following parts.
--- Part 1.Terms and Definitions;
--- Part 2.General requirements;
--- Part 3.Model construction;
--- Part 4.Process symbols and markings;
--- Part 5.Detailed design;
--- Part 6.Data requirements;
--- Part 7.Issue requirements.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Technical Committee for Standardization of Technical Product Documents (SAC/TC146).
This document is drafted by. XCMG Construction Machinery Co., Ltd., China Machinery Productivity Promotion Center, China Electronics Technology Group Corporation
The 38th Research Institute, Shanghai Pairui Information Technology Co., Ltd., Shandong Shanda Huatian Software Co., Ltd., Inner Mongolia First Machinery Group Co., Ltd.
Co., Ltd., CRRC Zhuzhou Electric Locomotive Co., Ltd., Nanjing Qijun Software Co., Ltd., China Northern Vehicle Research Institute, CRRC Qishuyan Locomotive
Ltd.
The main drafters of this document. Wu Rui, Zhao Zhenglong, Chen Jie, Zhang Xiaolu, Tian Fujun, Zeng Xiangyu, Li Jianxun, Yang Xihao, Liu Wenbin, Shao Xiaodong,
Jiang Yaping, Cheng Ganfeng, Shi Guoyou.
Introduction
With the gradual application and popularization of 3D computer-aided design (CAD) technology, and model-based definition (MBD) technology in manufacturing
The implementation within the enterprise, the development mode and development process of mechanical products have undergone major changes, and the 3D digital model has replaced the 2D drawings.
It has gradually become the only basis for product development, which is a huge change in terms of technology, management and ideas. this
The changes make it difficult for the traditional two-dimensional process design standards to be applied to the process design in the three-dimensional environment. In order to effectively solve the three-dimensional work of manufacturing enterprises
To solve the bottleneck problem in the application of art design technology, promote the popularization and engineering application of three-dimensional process design technology, and formulate GB/T 41158 "Mechanical Production
Product 3D Process Design. According to the working process of three-dimensional process design of mechanical products, it is planned to be composed of seven parts.
--- Part 1.Terms and Definitions. The purpose is to standardize the terms and definitions related to the three-dimensional process design of mechanical products, and to unify the related terms and definitions.
concepts and avoid communication difficulties, ambiguities and misunderstandings caused by unclear concepts and terminology.
--- Part 2.General requirements. The purpose is to classify the three-dimensional process design of mechanical products, the general process and the communication of each key link.
Based on the requirements, it focuses on solving the common problems existing in the three-dimensional process of mechanical products, and gives relevant technical requirements.
--- Part 3.Model construction. The purpose is to standardize how to build and transfer the process and step models in the three-dimensional process design of mechanical products.
It focuses on solving problems such as the process and common requirements of process and step model construction in the process of 3D process design of mechanical products.
Avoid rework caused by inconsistent design habits.
--- Part 4.Process symbols and markings. The purpose is to standardize machining, sheet metal, welding and assembly in the three-dimensional process design of mechanical products.
Match the symbol content, representation and three-dimensional labeling requirements of typical process symbols, and provide basis for the labeling of process symbols in a three-dimensional environment.
data and guidance.
--- Part 5.Detailed design. The purpose is to standardize machining, sheet metal, welding and
The basic process and technical requirements of typical process design such as assembly provide the basis and technical requirements for the detailed design of three-dimensional process design of mechanical products
guide.
--- Part 6.Data requirements. The purpose is to standardize the data classification, data exchange and sharing requirements in the three-dimensional process design of mechanical products.
It focuses on solving the problems of unclear data transfer deliverables and incomplete data at various stages in the 3D process design process of mechanical products.
question.
--- Part 7.Issue requirements. The purpose is to standardize the distribution content related to the distribution of process results in the three-dimensional process design of mechanical products,
The release form and technical requirements provide basis and guidance for the release of process results in a three-dimensional environment.
3D process design of mechanical products
PART 6.DATA REQUIREMENTS
1 Scope
This document specifies the classification of data in the three-dimensional process design of mechanical products, the general requirements for data, process plan design, route design, detailed
Detailed design, data requirements in the process release stage, and data management requirements.
This document applies to the application, development, service and research of 3D process design of mechanical products based on model definition.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 16722 (all parts) Computer-aided technical information processing of technical product documents
GB/T 24734.2-2009 Technical Product Documentation General Rules for Digital Product Definition Data Part 2.Data Set Identification and Control
GB/T 24734.3-2009 Technical Product Documentation General Rules for Digital Product Definition Data Part 3.Data Set Requirements
GB/T 41158.1-2022 Three-dimensional process design of mechanical products - Part 1.Terms and definitions
GB/T 41158.2-2022 Three-dimensional process design of mechanical products - Part 2.General requirements
GB/T 41158.7-2022 Three-dimensional process design of mechanical products - Part 7.Release requirements
3 Terms and Definitions
Terms and definitions defined in GB/T 41158.1-2022 apply to this document.
4 Classification of data
4.1 By Process Type
According to the process type, it can be divided into machining process data, sheet metal process data, welding process data, assembly process data, etc.
4.2 By stage
According to the stage, it can be divided into the data of the process plan design stage, the data of the process detailed design stage, and the data of the process release stage, etc.
5 General Requirements
5.1 Data Definition and Organizational Requirements
The data definition and organization of data in the three-dimensional process design of mechanical products meet the following requirements.
a) Data should be organized in the form of datasets, contained in or referenced by datasets, and defined in a manner consistent with
In accordance with the provisions of 5.2 in GB/T 24734.3-2009;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41158.6-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41158.6-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41158.6-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41158.6-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|