| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41158.5-2022 | English | RFQ |
ASK
|
5 days [Need to translate]
|
[Renamed to GB/T41923] Three-dimensional process planning for mechanical products - Part 5: Detailed design
| Obsolete |
GB/T 41158.5-2022
|
PDF similar to GB/T 41158.5-2022
Basic data | Standard ID | GB/T 41158.5-2022 (GB/T41158.5-2022) | | Description (Translated English) | [Renamed to GB/T41923] Three-dimensional process planning for mechanical products - Part 5: Detailed design | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Word Count Estimation | 26,292 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41158.5-2022: [Renamed to GB/T41923] Three-dimensional process planning for mechanical products - Part 5: Detailed design
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Three-dimensional process planning for mechanical products -- Part 5.Detailed design
ICS 01.100.01
CCSJ04
National Standards of People's Republic of China
3D process design of mechanical products
Part 5.Detailed Design
Part 5.Detaileddesign
Published on 2022-03-09
2022-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Machining process design 1
5 Sheet metal process design 3
6 Welding process design 5
7 Assembly process design 7
Appendix A (Informative) Example of Key Processes for Machining Process Design 10
Appendix B (informative) Example of key process of sheet metal process design 14
Appendix C (Informative) Examples of Key Processes for Welding Process Design 17
Appendix D (Informative) Example of Key Processes for Assembly Process Design 19
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
This document is Part 5 of GB/T 41158 "3D Process Design of Mechanical Products". GB/T 41158 has released the following parts.
--- Part 1.Terms and Definitions;
--- Part 2.General requirements;
--- Part 3.Model construction;
--- Part 4.Process symbols and markings;
--- Part 5.Detailed design;
--- Part 6.Data requirements;
--- Part 7.Issue requirements.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Technical Committee for Standardization of Technical Product Documents (SAC/TC146).
This document is drafted by. Shandong Shanda Huatian Software Co., Ltd., China National Machinery Productivity Promotion Center, CRRC Zhuzhou Electric Locomotive Co., Ltd.,
Shanghai Pairui Information Technology Co., Ltd., Henan Diesel Engine Heavy Industry Co., Ltd., XCMG Construction Machinery Co., Ltd., Inner Mongolia
First Machinery Group Co., Ltd., China North Vehicle Research Institute, China Electronics Technology Group Corporation Thirty-Eighth Research Institute, Wuhan Kaimu
Information Technology Co., Ltd., Shaanxi Fast Gear Co., Ltd.
The main drafters of this document. Qiu Huihui, Wang Yunfeng, Luo Haipeng, Zheng Xiaohua, Lin Jinsong, Nie Zhibin, Wu Rui, Gao Peijun, Xu Ping, Zhang Xiangxiang,
Chen Wanling, Zeng Fenfang, Mu Hua, Yan Jianbo, Kou Zhida.
Introduction
With the gradual application and popularization of 3D computer-aided design (CAD) technology, and model-based definition (MBD) technology in manufacturing
The implementation within the enterprise, the development mode and development process of mechanical products have undergone major changes, and the 3D digital model has replaced the 2D drawings.
It has gradually become the only basis for product development, which is a huge change in terms of technology, management and ideas. this
The changes make it difficult for the traditional two-dimensional process design standards to be applied to the process design in the three-dimensional environment. In order to effectively solve the three-dimensional work of manufacturing enterprises
To solve the bottleneck problem in the application of art design technology, promote the popularization and engineering application of three-dimensional process design technology, and formulate GB/T 41158 "Mechanical Production
Product 3D Process Design. According to the working process of three-dimensional process design of mechanical products, it is planned to be composed of seven parts.
--- Part 1.Terms and Definitions. The purpose is to standardize the terms and definitions related to the three-dimensional process design of mechanical products, and to unify the related terms and definitions.
concepts and avoid communication difficulties, ambiguities and misunderstandings caused by unclear concepts and terminology.
--- Part 2.General requirements. The purpose is to classify the three-dimensional process design of mechanical products, the general process and the communication of each key link.
Based on the requirements, it focuses on solving the common problems existing in the three-dimensional process of mechanical products, and gives relevant technical requirements.
--- Part 3.Model construction. The purpose is to standardize how to build and transfer the process and step models in the three-dimensional process design of mechanical products.
It focuses on solving problems such as the process and common requirements of process and step model construction in the process of 3D process design of mechanical products.
Avoid rework caused by inconsistent design habits.
--- Part 4.Process symbols and markings. The purpose is to standardize machining, sheet metal, welding and assembly in the three-dimensional process design of mechanical products.
Match the symbol content, representation and three-dimensional labeling requirements of typical process symbols, and provide basis for the labeling of process symbols in a three-dimensional environment.
data and guidance.
--- Part 5.Detailed design. The purpose is to standardize machining, sheet metal, welding and
The basic process and technical requirements of typical process design such as assembly provide the basis and technical requirements for the detailed design of three-dimensional process design of mechanical products
guide.
--- Part 6.Data requirements. The purpose is to standardize the data classification, data exchange and sharing requirements in the three-dimensional process design of mechanical products.
It focuses on solving the problems of unclear data transfer deliverables and incomplete data at various stages in the 3D process design process of mechanical products.
question.
--- Part 7.Issue requirements. The purpose is to standardize the distribution content related to the distribution of process results in the three-dimensional process design of mechanical products,
The release form and technical requirements provide basis and guidance for the release of process results in a three-dimensional environment.
3D process design of mechanical products
Part 5.Detailed Design
1 Scope
This document specifies the basic process of typical process design of machining, sheet metal, welding, assembly, etc. in the process of 3D process design of mechanical products
and requirements.
This document applies to the application, development, service and research of 3D process design of mechanical products based on model definition.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 4863-2008 Basic terms of mechanical manufacturing process
GB/T 24734.1-2009 Technical Product Documentation Digital Product Definition Data General Part 1.Terms and Definitions
GB/T 26101-2010 General technical requirements for virtual assembly of mechanical products
GB/T 41158.1-2022 Three-dimensional process design of mechanical products - Part 1.Terms and definitions
GB/T 41158.2-2022 Three-dimensional process design of mechanical products - Part 2.General requirements
GB/T 41158.3-2022 Three-dimensional process design of mechanical products - Part 3.Model construction
GB/T 41158.4-2022 Three-dimensional process design of mechanical products - Part 4.Process symbols and labels
GB/T 41158.7-2022 Three-dimensional process design of mechanical products - Part 7.Release requirements
3 Terms and Definitions
Techniques defined in GB/T 4863-2008, GB/T 24734.1-2009, GB/T 26101-2010 and GB/T 41158.1-2022
terms and definitions apply to this document.
4 Machining process design
4.1 General requirements
4.1.1 Input Requirements
The input object of the detailed design of the machining process in the three-dimensional environment is mainly the part design model, and the design model should have the geometric characteristics of the model.
Specifications, attributes, labels, management information and technical requirements for product design conventions.
Other input objects of detailed design of machining process, including but not limited to detailed design and modification basis of machining process, process standards, engineering
Process planning and management technical documents such as process plan, process route, process change order, etc.
4.1.2 Application Software Requirements
The machining process design software should meet the following requirements.
|