|
US$414.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41114-2021: Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing(PAUT)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41114-2021 | English | 414 |
Add to Cart
|
4 days [Need to translate]
|
Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing(PAUT)
| Valid |
GB/T 41114-2021
|
PDF similar to GB/T 41114-2021
Standard similar to GB/T 41114-2021 GB/T 41105.2 GB/T 41105.1 GB/T 41120 Basic data | Standard ID | GB/T 41114-2021 (GB/T41114-2021) | | Description (Translated English) | Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing(PAUT) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Word Count Estimation | 22,241 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41114-2021: Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing(PAUT)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration block for phased array testing(PAUT)
ICS 19:100
CCSJ04
National Standards of People's Republic of China
NDT Ultrasonic Testing
Specification for Phased Array Ultrasonic Testing Standard Test Blocks
(ISO 19675:2017, IDT)
Published on 2021-12-31
2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 1
5 make 1
6 Mark 3
7 Declaration of Conformity 5
8 Modifications permissible for Phased Array Standard Test Blocks 6
Appendix A (normative) Determination of material anisotropy 8
Appendix B (informative) Description of possible usage of PAUT standard test block 12
Reference 17
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
This document is equivalent to ISO 19675:2017 "Non-Destructive Testing Ultrasonic Testing Phased Array Ultrasonic Testing Standard Test Block Specifications":
The following minimal editorial changes have been made to this document:
--- The technical content of EN16018 and ISO 23243 is consistent: In order to be consistent with the existing technical documents, EN16018 is changed to
ISO 23243 (chapter 2);
---In order to adapt to domestic technology application, add the note of 5:1;
--- In order to adapt to domestic technical applications, increase the national standard mark [see 6a)];
--- In order to adapt to domestic technical applications, the dimension marking form and view direction of Figure 2b) and Figure 2c) have been adjusted;
--- Add a reference to Appendix B (Chapter 8);
--- Add the description of formula (A:1) symbols;
--- Added reference GB/T 1591-2018 for ease of use:
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the National Technical Committee for Standardization of Nondestructive Testing (SAC/TC56):
This document is drafted by: Shanghai Institute of Materials, Zhejiang Electric Power Boiler and Pressure Vessel Inspection Co:, Ltd:, Shanghai Special Equipment Supervisor
Supervision and Inspection Technology Research Institute, Shandong Ruixiang Mould Co:, Ltd:, Zhejiang Uerte Testing Technology Co:, Ltd:, Shanghai Baoye Engineering Technology Co:, Ltd:
company:
The main drafters of this document: Jiang Jiansheng, Huang Yin, Zhang Jie, Zhao Zhoufeng, Yang Yuqing, Zhang Pinghui, Li Qing, Lv Junmin, Wang Lili, Ding Jie,
Zhang Yifeng, Ma Jun, Xue Feng, Song Fei:
NDT Ultrasonic Testing
Specification for Phased Array Ultrasonic Testing Standard Test Blocks
1 Scope
This document specifies the dimensions, materials and fabrication requirements for steel test blocks used to test the performance of phased array ultrasonic testing equipment:
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
ISO 5577 Non-destructive testing ultrasonic testing terminology (Non-destructive testing-Ultrasonic testing-Vocabula-
ry)
Note: GB/T 12604:1-2020 Nondestructive testing term ultrasonic testing (ISO 5577:2017, MOD)
ISO 23243 Non-destructive testing terminology for phased array ultrasonic testing (Non-destructive testing-Ultrasonic testing with
arrays-Vocabulary)
EN 10025-2 Structural steel hot-rolled products - Part 2: Technical delivery conditions for non-alloy structural steel (Hotroled products of
structuralsteels-Part 2:Technicaldeliveryconditionsfornon-aloystructuralsteels)
3 Terms and Definitions
Terms and definitions defined in ISO 5577 and ISO 23243 apply to this document:
The web addresses of terminology databases used in standardization work maintained by ISO and IEC are as follows:
---IEC Electrotechnical Encyclopedia: http://www:electropedia:org/;
---ISO online browsing platform: https://www:iso:org/obp:
4 Abbreviations
The following abbreviations apply to this document:
ACG: Angle Gain Correction
FSH: full screen height
RF: radio frequency
SDH: horizontal hole
SNR: Signal to Noise Ratio
TCG: Time Gain Correction
5 Make
5:1 Steel
The test block shall be made of steel with a steel grade of S355J0 in accordance with EN10025-2 or a steel equivalent to this grade:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41114-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 41114-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41114-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41114-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|