HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 40366-2021 English PDF

US$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40366-2021: Guidelines for the inclusion of graphical symbols for use on electrical equipment in IEC publications
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 40366-2021English314 Add to Cart 3 days [Need to translate] Guidelines for the inclusion of graphical symbols for use on electrical equipment in IEC publications Valid GB/T 40366-2021

PDF similar to GB/T 40366-2021


Standard similar to GB/T 40366-2021

GB/T 40092   GB/T 40863   GB/T 40093   GB/T 20236   GB/T 16679.1   

Basic data

Standard ID GB/T 40366-2021 (GB/T40366-2021)
Description (Translated English) Guidelines for the inclusion of graphical symbols for use on electrical equipment in IEC publications
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Word Count Estimation 18,114
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 40366-2021: Guidelines for the inclusion of graphical symbols for use on electrical equipment in IEC publications


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guidelines for the inclusion of graphical symbols for use on electrical equipment in IEC publications ICS 01.080 CCSK04 National Standards of People's Republic of China Graphical symbols for electrical equipment Guidelines for inclusion in IEC publications electricalequipmentinIEC publications (IEC 62648.2012, Graphicalsymbolsforuseonequipment-Guidelinesforthe inclusionofgraphicalsymbolsinIEC publications, IDT) Released on 2021-10-11 2022-05-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Basic requirements 4 5 Main criteria 4 5.1 General 4 5.2 Consistency of graphical symbols for electrical equipment 4 5.3 Develop procedures for product publications that include graphical symbols for electrical equipment 4 Appendix A (Normative) Rigid Program and Flexible Program 6 A.1 General 6 A.2 Rigid program 6 A.3 Flexible program 6 Appendix B (informative) Application examples of graphical symbols for electrical equipment 8 B.1 General 8 B.2 Example 8 Appendix C (Informative) IEC 60417 New Graphic Symbol Proposal Table 13 Reference 14 Table A.1 Rigid program step 6 Table B.1 Examples of safety signs using graphical symbols as safety symbols for electrical equipment 8 Table B.2 Examples of graphical symbols and safety signs for safety-related electrical equipment 10 Table B.3 Examples of graphical symbols for electrical equipment with negative meaning 11

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. The translation method used in this document is equivalent to the IEC 62648.2012 "Graphic Symbols for Equipment Listed in the Guidance of IEC Publications. but". This document incorporates the amendments of IEC 62648.2012/Amd.1.2015, and the clauses involved in these amendments have been passed outside of it. The vertical double line (‖) of the side margin position is marked. The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows. ---GB/T 2893.1-2013 Graphical symbols, safety colors and safety signs Part 1.Design of safety signs and safety signs Accounting principles (ISO 3864-1.2011, MOD) ---GB/T 5465.1-2009 Graphical symbols for electrical equipment Part 1.Overview and classification (IEC 60417Database. 2007-01, MOD) ---GB/T 5465.2-2008 Graphical symbols for electrical equipment Part 2.Graphical symbols (IEC 60417DB.2007, IDT) ---GB/T 16273 (all parts) Graphical symbols for equipment [ISO 7000 (all parts)] ---GB/T 16902.2-2008 Rules for Representing Graphic Symbols for Equipment Part 2.Form and Use of Arrows (ISO 80416- 2.2001, MOD) ---GB/T 23371.1-2013 Basic Rules for Graphical Symbols for Electrical Equipment Part 1.Generation of Graphical Symbols for Registration (IEC 80416-1.2008, IDT) ---GB/T 23371.3-2009 Basic Rules for Graphical Symbols for Electronic Equipment Part 3.Application Guidelines (IEC 80416-3. 2002, IDT) ---GB/T 31523.1-2015 Safety Information Identification System Part 1.Marking (ISO 7010.2011, MOD) Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed and managed by the National Electrical Information Structure, Document Preparation and Graphic Symbol Standardization Technical Committee (SAC/TC27). Drafting organizations of this document. Beijing Institute of Electrical Technology and Economics of Machinery Industry, Tianjin Electric Science Research Institute Co., Ltd., Yixiang Intelligent Design Equipment (Shenzhen) Co., Ltd., State Grid Jiangsu Electric Power Co., Ltd. Electric Power Research Institute, Shanghai Electric Tool Research Institute (Group) Co., Ltd., State Grid Inner Mongolia Eastern Electric Power Co., Ltd. Construction Branch, China Machinery Productivity Promotion Center, China Electronics Standardization Institute, State Grid The Electric Power Research Institute of Mongolia Eastern Electric Power Co., Ltd., and the Electric Power Research Institute of State Grid Gansu Electric Power Company. The main drafters of this document. Xu Yuanfeng, Chai Qing, Zhen Hanyu, Gu Jing, Li Qun, Wang Ying, Gao Yongmei, Luo Yuliang, Li Dongmei, Luo Zhaowen, Tian Lishan, Liu Huibin, Sun Rong, Yang Yong.

Introduction

Graphic symbol is a visually perceptible figure with specific meaning that has nothing to do with language, which is used to express certain information. For electrical equipment Graphic symbols have a wide range of uses. For a series of symbols used in the same place or on similar equipment, consistent design can improve the understanding of the symbols. Reality In international applications, when the symbol size is reduced to a very small size, a good design also helps to maintain its legibility. Therefore, experts involved in technical work It is necessary to collaborate with experts responsible for the development and maintenance of graphical symbols for electrical equipment in the horizontal standard IEC 60417. This document is used by committees that include graphical symbols for electrical equipment in their product publications. This document provides the committee to create The method of graphical symbols used on electrical equipment, and how to consult the method of IEC /SC3C (SAC/TC27/SC3), so that these The symbol is also listed in IEC 60417. This document specifies the procedures jointly approved by IEC /SC3C and other committees to develop Product publications with graphic symbols for gas equipment. Graphical symbols for electrical equipment Guidelines for inclusion in IEC publications

1 Scope

This document specifies the guidelines for the inclusion of graphical symbols for electrical equipment in IEC publications to ensure that it is included in the drawings for electrical equipment in IEC publications. The symbol conforms to the requirements of horizontal standards IEC 60417 and ISO 7000. This document is applicable to any technical committees and sub-technical committees that intend to develop graphical symbols for electrical equipment and include them in their product publications. 员会. This document is based on Chapter 4 of IEC Guide108.2006. For the creation of graphical symbols for new electrical equipment, see IEC 80416-1 and ISO 80416-2; for standardized drawings for electrical equipment For the application of pictograms, see IEC 80416-3 and ISO 80416-4. This horizontal standard is mainly used by technical committees when drafting standards based on the principles specified in IEC Guide108. One of the duties of the technical committee is to appropriately use horizontal standards when drafting publications. Unless specifically mentioned or included in relevant publications Contains the content of the horizontal standard, otherwise the content of the horizontal standard does not apply.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. ISO 3864-1 Graphic symbols, safety colors and safety signs. Part 1.Design principles of safety signs and safety signs (Graphicalsymbols-Safetycoloursandsafetysigns-Part 1.Designprinciplesforsafetysignsand safetymarkings) Graphical symbols for use in ISO 7000 equipment index and summary (Graphicalsymbolsforuseonequipment-Indexand synopsis) ISO 7010.2011 Graphical symbols, safety colors and safety signs, registered safety signs (Graphicalsymbols-Safety coloursandsafetysigns-Registeredsafetysigns) ISO 80416-2 Basic principles for graphical symbols for equipment-Part 2.Form and use of arrows (Basic principles for graphicalsymbolsforuseonequipment-Part 2.Formanduseofarrows) ISO 80416-4 Basic principles of graphical symbols for equipment-Part 4.Guidelines for redrawing graphical symbols for screens and displays (icons) [Basicprinciplesforgraphicalsymbolsforuseonequipment-Part 4.Guidelinesfortheadaptationof graphicalsymbolsforuseonscreensanddisplays(icons)] IEC 60417 Graphical symbols for use onequipment IEC 80416-1.2008 Basic Rules for Graphical Symbols for Electrical Equipment Part 1.Generation of Graphical Symbols for Registration (Basic principlesforgraphicalsymbolsforuseonequipment-Part 1.Creationofgraphicalsymbolsforreg- istration) IEC 80416-3.2002 Basic rules for graphical symbols for electrical equipment Part 3.Guidelines for the application of graphical symbols (Basicprin- ciplesforgraphicalsymbolsforuseonequipment-Part 3.Guidelinesfortheapplicationofgraphical

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40366-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40366-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40366-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40366-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.