|
US$2559.00 · In stock
Delivery: <= 12 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39582-2020: Test open data services (TODS)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39582-2020 | English | 2559 |
Add to Cart
|
12 days [Need to translate]
|
Test open data services (TODS)
| Valid |
GB/T 39582-2020
|
PDF similar to GB/T 39582-2020
Basic data | Standard ID | GB/T 39582-2020 (GB/T39582-2020) | | Description (Translated English) | Test open data services (TODS) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L70 | | Classification of International Standard | 35.020 | | Word Count Estimation | 126,133 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-07-01 | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39582-2020: Test open data services (TODS)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Pilot testing of open data services)
ICS 35:020
L70
National Standards of People's Republic of China
Pilot testing of open data services
(ISO /PAS22720:2005, ASAM Opendataservices5:0, NEQ)
2020-12-14 release
2021-07-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms, definitions and abbreviations 1
3:1 Terms and definitions 1
3:2 Abbreviations 3
4 Overview 3
4:1 The relationship between TODS and ASAMODS 3
4:2 Objective 4
4:3 Value 4
4:4 Technical method 5
4:5 Data Model 6
4:6 Application Programming Interface 12
4:7 Transmission format 15
5 Architecture 16
5:1 Introduction 16
5:2 Elements of the base model 16
5:3 Application model rules 18
5:4 Attributes and relationships in the model 21
5:5 Data Type 24
5:6 Application Programming Interface 28
5:7 Inheritance mechanism 34
5:8 Other factors 36
6 Basic model 42
6:1 Introduction 42
6:2 Description of environmental elements 42
6:3 Description of management elements 45
6:4 Description of measurement and measurement data elements 48
6:5 Description of elements describing data 53
6:6 Element description of quantities and units 57
6:7 Description of test piece management 60
6:8 Description of device management 64
6:9 Description of security elements 66
6:10 Description of other elements 68
7 Transmission format 70
7:1 Overview 70
7:2 Transferring files 71
8 Application Programming Interface 102
8:1 Factory 102
8:2 Session 103
8:3 Model access 104
8:4 Instance access 107
8:5 Document Service 109
8:6 File access 110
8:7 File 112
8:8 Read and write file interface 114
8:9 Write file interface 114
8:10 Enumeration access 116
8:11 Enumeration 117
Appendix A (Normative Appendix) Execution Status (ErrorCode) 119
Appendix B (Normative Appendix) File Service Information (FSInfo) 121
Appendix C (Normative Appendix) Directory Information (DirInfo) 122
Foreword
This standard was drafted in accordance with the rules given in GB/T 1:1-2009:
This standard uses the redrafting method with reference to ISO /PAS22720:2005 "ASAM Open Data Service 5:0":
The consistency of ISO /PAS22720:2005 is not equivalent:
This standard was proposed by China Machinery Industry Federation:
This standard is under the jurisdiction of the National Automation System and Integration Standardization Technical Committee (SAC/TC159):
Drafting organizations of this standard: Beijing Ruifeng Synergy Technology Co:, Ltd:, China National Institute of Standardization, Chengdu Aircraft Design Institute, China
Hangfa Sichuan Gas Turbine Research Institute, Beijing Institute of Mechanical and Electrical Engineering, Beijing Institute of Control and Electronic Technology, China Shipbuilding Industry Corporation
The 724 Research Institute, China Aviation Development Shenyang Liming Aviation Engine Co:, Ltd:, Nanjing Electronic Equipment Research Institute, AVIC Engineering Integration
Equipment Co:, Ltd:, Southwest Institute of Technology and Engineering, Beihang University:
The main drafters of this standard: Zhang Chengsheng, Wang Ke, Nan Fuchun, Hong Xuechao, Hong Yan, Liu Jianfeng, Qiao Li, Liu Bin, Chen Haipeng, Liao Zhonghua,
Wang Zhiqiang, Yue Gaofeng, Chen Chunlin, Wang Longyi, Liu Hong, Liu Zhaoxin, Li Shaohui, Yang Qinghai, Liu Shouhua, Liu Bing, Zhao Xingfu, Li Wenjie, Zhou Junhua:
Introduction
There are various testing, evaluation and simulation solutions in the automotive, aviation, aerospace, construction, and electronics industries, and they all have their own independent management systems:
The special format of system and data storage, and the method of information maintenance are also different: As the complexity of product innovation increases, expand and modify this
These solutions and their integration with third-party systems are becoming increasingly challenging: At the same time, because the information description is different and difficult
With access, data mining and interdisciplinary collaborative innovation based on a unified knowledge base cannot be realized, and it is difficult to apply new technologies and new methods to existing ones:
In some systems, there is an urgent need for a simple and standardized information access method: Access to product life cycle information also requires standards
Supported by standardized methods to deal with the risks caused by software tools and business discontinuities:
ISO /PAS22720:2005 is the Open Data Service (ODS) proposed by the Association for Standardization of Automation and Measurement Systems (ASAM):
The ODS standard has been widely used internationally: By standardizing the data model, interface, data exchange syntax and format, it can be used for different
The application environment provides the same data frame to solve the problem of data exchange and sharing:
In:2009, ASAM released a new version of the ODS5:2 standard: The domestic demand for data exchange and sharing in the test field is also very urgent:
Therefore, in combination with the new version of the ODS standard and domestic demand, ISO /PAS22720:2005 is revised, and with reference to ASAM ODS5:2,
Advanced Test Open Data Service (TODS) dedicated to test data:
Through the expansion of ISO /PAS22720:2005, TODS can meet the sustainability requirements of test information preservation and acquisition, reducing
Low project costs and risks, and provide a reliable data sharing and exchange standard for information systems: By using standardized interfaces
And standard data structure can reduce the difficulty of system integration in heterogeneous environment and significantly improve the efficiency of information exchange:
Pilot testing of open data services
1 Scope
This standard provides the architecture, basic model, transmission format and application programming interface of the open data service for testing and testing:
This standard is applicable to the construction of test data management system, including test data collection, storage, management, analysis, exchange and sharing, data application
Wait:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
ISO 8601:2004 Data elements and exchange format information exchange date and time representation (Dataelementsandinter-
changeformats-Informationinterchange-Representationofdatesandtimes)
IEEE754 binary floating-point arithmetic standard (IEEEstandardforbinaryfloating-pointarithmetic)
3 Terms, definitions and abbreviations
3:1 Terms and definitions
The following terms and definitions apply to this document:
3:1:1
Basemodel
A holistic, application-independent logical data model:
Note: The model defines the structure of the test data managed in the TODS context, the basic elements of the test data, and the relationship between the basic elements: it
It consists of a set of pre-defined basic elements and a set of rules that these elements should obey:
3:1:2
Applicationmodel
In order to realize the test and test open data service, the TODS basic model is extended to meet the specific requirements of the test information industry
Model:
Note: The derivation rules of the base model are required: It is composed of a collection of derived application elements, and each element is derived from a basic element:
3:1:3
Applicationprogramminginterface
A computer system, database, or application for processing service requests for other computer programs, or processing and other computing
Interface for machine program data exchange:
3:1:4
Transfer format ASAMtransferformatsextensiblemarkuplanguage
XML transmission files based on XML schema files and extension rules:
Note: Able to transmit the required structure and instance information, and store all this information in a standardized format:
|