|
US$389.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39568-2020: General requirements for drive micro motors
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39568-2020 | English | 389 |
Add to Cart
|
4 days [Need to translate]
|
General requirements for drive micro motors
| Valid |
GB/T 39568-2020
|
PDF similar to GB/T 39568-2020
Basic data | Standard ID | GB/T 39568-2020 (GB/T39568-2020) | | Description (Translated English) | General requirements for drive micro motors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K24 | | Classification of International Standard | 29.160.30 | | Word Count Estimation | 21,259 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-07-01 | | Quoted Standard | GB/T 755; GB/T 1971; GB/T 2423.1-2008; GB/T 2423.2-2008; GB/T 2423.16-2008; GB/T 2423.17-2008; GB/T 2828.1-2012; GB/T 4942.1; GB/T 6113.203; GB/T 6113.204; GB/T 7345-2008; GB/T 7346; GB/T 10068; GB/T 10069.1; GB/T 10405; GB 17799.3; GB 17799.4; GB/T 18211 | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the shape, model and operating conditions, technical requirements and test methods, inspection rules, delivery preparation and user services of the drive micromotor. This standard applies to the design, manufacture, inspection and acceptance of drive micromotors (hereinafter referred to as "motors"). | GB/T 39568-2020: General requirements for drive micro motors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(General technical requirements for driving micromotors)
ICS 29:160:30
K24
National Standards of People's Republic of China
General technical requirements for driving micromotors
2020-12-14 release
2021-07-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Shape, model and operating conditions 1
4 Technical requirements and test methods 3
5 Inspection rules 14
6 Delivery preparation 18
7 Customer Service 18
Foreword
This standard was drafted in accordance with the rules given in GB/T 1:1-2009:
This standard was proposed by China Electrical Equipment Industry Association:
This standard is under the jurisdiction of the National Micromotor Standardization Technical Committee (SAC/TC2):
Drafting organizations of this standard: Xi'an Institute of Micromotors, Xiamen Rituo Electric Technology Co:, Ltd:, Hefei Kaibang Motor Co:, Ltd:, Zhejiang Tai
Dawei Motor Co:, Ltd:, Shenzhen Zhengde Intelligent Control Co:, Ltd:, Shenyang University of Technology, Dongguan Ruijing Electrical Technology Co:, Ltd:, Fujian Min
Guangdian Motor Manufacturing Co:, Ltd:, Fujian Jinde Quality Inspection Technology Service Co:, Ltd:, Foshan Nanhai Shenghe Electric Co:, Ltd:, Foshan Gaominggao
Sheng Aluminum Co:, Ltd:, Rongcheng Hengli Motor Co:, Ltd:
The main drafters of this standard: Liu Jie, Ni Lioyong, Li Rong, Qiu Rongquan, Li Hao, Han Xueyan, Lin Jinli, Zhang Bin, Ke Zhihong, Zheng Kang, Wang Jiahua,
Zhang Peng:
General technical requirements for driving micromotors
1 Scope
This standard specifies the shape, model and operating conditions, technical requirements and test methods, inspection rules, delivery preparation and use of drive micromotors:
Household services:
This standard applies to the design, manufacture, inspection and acceptance of drive micromotors (hereinafter referred to as "motors"):
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 755 Rotating motor rating and performance
GB/T 1971 Rotating motor wire end marking and direction of rotation
GB/T 2423:1-2008 Environmental testing of electric and electronic products Part 2: Test method Test A: Low temperature
GB/T 2423:2-2008 Environmental testing of electric and electronic products Part 2: Test method Test B: High temperature
GB/T 2423:16-2008 Environmental testing of electric and electronic products Part 2: Test method Test J and guideline: Mould
GB/T 2423:17-2008 Environmental testing of electric and electronic products Part 2: Test method Test Ka: Salt spray
GB/T 2828:1-2012 Sampling inspection procedure by attributes Part 1: Batch inspection sampling searched by acceptance quality limit (AQL)
plan
GB/T 4942:1 Degree of protection of the overall structure of rotating electrical machines (IP code) Classification
GB/T 6113:203 Specification for radio disturbance and immunity measuring equipment and measurement methods Part 2-3: Radio disturbance and immunity
Degree measurement method radiated disturbance measurement
GB/T 6113:204 Radio disturbance and immunity measurement equipment and measurement method specification Part 2-4: Radio disturbance and immunity
Immunity measurement method
GB/T 7345-2008 Basic technical requirements for control motors
GB/T 7346 Control motor basic appearance structure type
GB/T 10068 The measurement, evaluation and limit of mechanical vibration of motors with a shaft center height of 56mm and above
GB/T 10069:1 Rotating electrical machine noise measurement method and limit value Part 1: Rotating electrical machine noise measurement method
GB/T 10405 Control motor model naming method
GB 17799:3 General Standard for Electromagnetic Compatibility for Emissions in Residential, Commercial and Light Industrial Environments
GB 17799:4 EMC general standard for emission in industrial environment
GB/T 18211 General safety requirements for micromotors
JB/T 8162 Control Motor Packaging Technical Conditions
3 Shape, model and operating conditions
3:1 Basic appearance structure and installation type
The basic appearance structure and installation type of the motor should meet the requirements of GB/T 7346:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39568-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39568-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39568-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39568-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|