|
US$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39199-2020: Characterization and testing methods of recycled polyethylene (PE)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39199-2020 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Characterization and testing methods of recycled polyethylene (PE)
| Valid |
GB/T 39199-2020
|
PDF similar to GB/T 39199-2020
Basic data | Standard ID | GB/T 39199-2020 (GB/T39199-2020) | | Description (Translated English) | Characterization and testing methods of recycled polyethylene (PE) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G31 | | Classification of International Standard | 83.080 | | Word Count Estimation | 10,176 | | Date of Issue | 2020-10-11 | | Date of Implementation | 2021-05-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39199-2020: Characterization and testing methods of recycled polyethylene (PE)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Characterization and testing methods of recycled polyethylene (PE)
ICS 83.080
G31
National Standards of People's Republic of China
Polyethylene (PE) plastic recycled materials
Characterization characteristics and detection methods
2020-10-11 released
2021-05-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed and managed by the National Standardization Technical Committee for Product Recycling and Management (SAC/TC415).
Drafting organizations of this standard. Tianjin Renewable Resources Research Institute of All China Supply and Marketing Cooperatives, China National Institute of Standardization, Anhui Win-Win Recycling
Resources Group Co., Ltd., Guangdong Junnuo Environmental Technology Co., Ltd., Linyi Hongtai Plastic Industry Co., Ltd., China National Supply and Marketing Cooperative
Department of Science and Education Association, Guangzhou Zhishun Technology Co., Ltd.
The main drafters of this standard. Du Tao, Gao Dongfeng, Du Bo, Lin Ling, Niu Feng, Fu Yun, Zhou Ziqiao, Zhu Yi, Song Yuntao, Zhao Bin, Qian Long,
Chen Xinzhun, Jin Yingang, Feng Yubin, Luo Si, Li Man, Wu Xiaoyan, Wang Xiuteng, Song Li, Yang Shuo, Wei Xianzhen, Wang Xin, Li Jiangyan, Zhao Yuhai, Cao Ya,
Zhao Haiyun.
Polyethylene (PE) plastic recycled materials
Characterization characteristics and detection methods
1 Scope
This standard specifies the important characterization characteristics, testing methods and quality assurance of polyethylene (PE) plastic recycled materials.
This standard applies to the quality control and evaluation of polyethylene (PE) plastic recycled materials.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 1033.1-2008 Determination of the density of plastic non-foam plastics Part 1.Immersion method, liquid pycnometer method and titration method
GB/T 1040.1 Determination of tensile properties of plastics Part 1.General
GB/T 1040.2 Determination of tensile properties of plastics Part 2.Test conditions for molding and extrusion plastics
GB/T 1040.3 Determination of tensile properties of plastics Part 3.Test conditions for films and sheets
GB/T 1043.1 Determination of impact performance of plastic simply supported beams Part 1.Non-instrumented impact test
GB/T 1843 Determination of impact strength of plastic cantilever beam
GB/T 1845.2 Plastic Polyethylene (PE) Molding and Extrusion Materials Part 2.Sample Preparation and Performance Determination
GB/T 2035 Plastic Terms and Definitions
GB/T 2411 Use a hardness tester to determine the indentation hardness (Shore hardness) of plastics and hard rubber
GB/T 2547 Plastic sampling method
GB/T 3682.1 Plastic thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR) measurement
Part 1.Standard Methods
GB/T 6284 General method for determination of moisture in chemical products by drying loss method
GB 6675.4 Toy Safety Part 4.Migration of Specific Elements
GB/T 9341 Determination of plastic bending properties
GB/T 9345.1-2008 Determination of Ash in Plastic Part 1.General Method
GB/T 9352-2008 Compression molding of plastic thermoplastic material samples
GB/T 21843 Plastic Vinyl Chloride Homopolymerization and Copolymerization Resins Used for Mechanical Sieve Determination of Particle Size
GB/T 26125 Determination of six restricted substances in electrical and electronic products (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers)
GB/T 26193 Determination of migrating elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium in toy materials inductively coupled plasma mass spectrometry
3 Terms and definitions
The following terms and definitions defined in GB/T 2035 apply to this document.
3.1
Polyethylene (PE) plastic recycled materials
After processing the waste polyethylene plastic through pretreatment (classification, cleaning, crushing, drying, etc.), melting granulation or modification, etc.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39199-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39199-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39199-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39199-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|