|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39060-2020: Technical requirements of manufacturing and installation consulting service for automated storage and retrieval system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39060-2020 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Technical requirements of manufacturing and installation consulting service for automated storage and retrieval system
| Valid |
GB/T 39060-2020
|
PDF similar to GB/T 39060-2020
Basic data | Standard ID | GB/T 39060-2020 (GB/T39060-2020) | | Description (Translated English) | Technical requirements of manufacturing and installation consulting service for automated storage and retrieval system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A20 | | Classification of International Standard | 03.080.99 | | Word Count Estimation | 14,151 | | Date of Issue | 2020-09-29 | | Date of Implementation | 2021-04-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39060-2020: Technical requirements of manufacturing and installation consulting service for automated storage and retrieval system
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirements of manufacturing and installation consulting service for automated storage and retrieval system
ICS 03.080.99
A20
National Standards of People's Republic of China
Automated warehouse equipment manufacturing
Technical requirements for installation supervision
2020-09-29 released
Implementation on 2021-04-01
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Basic requirements for equipment supervision services 2
5 Supervision at the manufacturing stage 3
6 Supervision during the installation phase 4
7 Supervision data 6
Appendix A (Normative Appendix) Supervision Content and Witness Method of Automated Warehouse Equipment Manufacturing Stage 7
Appendix B (Normative Appendix) Supervision Content and Witness Method of Automated Warehouse Equipment Installation Stage 9
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed and managed by the National Standardization Technical Committee for Equipment Supervision Engineering Consulting (SAC/TC423).
Drafting organizations of this standard. Beijing Crane and Transportation Machinery Design and Research Institute Co., Ltd., Wuxi Zhongding Integration Technology Co., Ltd., Beijing Kezheng
Ping Engineering Technology Testing and Research Institute Co., Ltd., Zhejiang Dema Technology Co., Ltd., Shanghai Jingxing Storage Equipment Engineering Co., Ltd., Kunming
Kunchuan Logistics Information Industry Co., Ltd., Shenzhen CIMC Tianda Logistics System Engineering Co., Ltd., Putian Logistics Technology Co., Ltd., Longhe Intelligent
Equipment Manufacturing Co., Ltd., Shanghai Jingxing Logistics Equipment Engineering Co., Ltd., Shicang Intelligent Storage Equipment (Shanghai) Co., Ltd., Suzhou Luo
Bert Mu Niu Liuma Logistics Technology Co., Ltd., Shenzhen Kaidongyuan Modern Logistics Co., Ltd., Shanghai Wentu shelf safety detection technology has
Co., Ltd., Anhui Kaixuan Intelligent Parking Equipment Co., Ltd., China National Accreditation Center for Conformity Assessment, Beijing University of Posts and Telecommunications, National Crane Transport Aircraft
Machinery Quality Supervision and Inspection Center, China Equipment Supervision Association.
The main drafters of this standard. Zhang Haokun, Tang Chao, Li Shuguang, Zhao Menglin, Zhang Wenyan, Zhao Chunhui, Tao Tianhua, Pan Feng, Weng Zhongjie, Tang Xiaoming,
Huang Xi, Shang Gaohai, Pan Deng, Chen Hua, Yang Jing, Cui Xiong, Wang Zhiyu, Pan Yongping, Lu Wen, Wang Tuo, Li Xin, Weng Xun, Dong Tingting, Zhang Xiaorui, Bi Wenxiang.
Automated warehouse equipment manufacturing
Technical requirements for installation supervision
1 Scope
This standard specifies the terms and definitions and equipment related to the manufacturing and installation quality of automated warehouse equipment (hereinafter referred to as warehouse equipment)
The basic requirements of supervision services, the supervision of the manufacturing stage, the supervision of the installation stage, and the requirements of supervision materials.
This standard applies to steel structure shelves, lane stacking cranes, conveying and sorting equipment, and automatic guided vehicles used in automated three-dimensional warehouses
(AGV) equipment.
This standard does not apply to equipment used in low-temperature automated warehouses and explosion-proof automated warehouses.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 26429 Equipment Engineering Supervision Code
JB/T 9018 Design Specification for Automated Warehouse
JB/T 10823 Terminology of automated warehouse
3 Terms and definitions
The following terms and definitions defined in GB/T 26429, JB/T 9018 and JB/T 10823 apply to this document. For ease of use,
Some terms and definitions in GB/T 26429 are repeated below.
3.1
Automated storage and retrieval system
A warehouse where storage and retrieval units are composed of steel structure shelves, stackers and handling equipment and can be automated.
[JB/T 9018-2011, definition 3.1]
3.2
Plantengineering
Projects with equipment as the main construction content include planning, design, procurement, manufacturing, installation, debugging and other processes.
Note 1.Equipment engineering also includes overhaul and technical transformation of equipment systems.
Note 2.In actual applications, equipment engineering may be called equipment engineering projects.
[GB/T 26429-2010, definition 3.1]
3.3
Witness
The equipment supervision engineer personally observes, inspects, records, confirms and other witness activities on documents, records, processes and other physical objects and activities.
[GB/T 26429-2010, definition 3.13]
3.4
Document witness point recordpoint
R point
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39060-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39060-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39060-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39060-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|