|
US$339.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38987-2020: Cemented carbide rods with helical coolant holes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 38987-2020 | English | 339 |
Add to Cart
|
4 days [Need to translate]
|
Cemented carbide rods with helical coolant holes
| Valid |
GB/T 38987-2020
|
PDF similar to GB/T 38987-2020
Basic data | Standard ID | GB/T 38987-2020 (GB/T38987-2020) | | Description (Translated English) | Cemented carbide rods with helical coolant holes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H72 | | Classification of International Standard | 77.160 | | Word Count Estimation | 18,191 | | Date of Issue | 2020-07-21 | | Date of Implementation | 2021-06-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 38987-2020: Cemented carbide rods with helical coolant holes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cemented carbide rods with helical coolant holes
ICS 77.160
H72
National Standards of People's Republic of China
Cemented carbide spiral hole bar
2020-07-21 released
2021-06-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by China Nonferrous Metals Industry Association.
This standard is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243).
Drafting organizations of this standard. Zhuzhou Cemented Carbide Group Co., Ltd., Xiamen Jinlu Special Alloy Co., Ltd., Zigong Cemented Carbide Co., Ltd.
Ren company, Shenzhen Zhucheng Technology Co., Ltd., Nanchang Cemented Carbide Co., Ltd.
The main drafters of this standard. Mao Shanwen, Meng Xiaowei, Liang Hong, Liu Tiemei, Yang Ligeng, Liao Jun, Jiang Tao, Ling Zhi, Zou Jianping, Chen Chengyi, Zhang Yue,
Huang Shuai, Wu Aihua.
Cemented carbide spiral hole bar
1 Scope
This standard specifies the classification and schematic diagram, technical requirements, test methods, inspection rules, markings, packaging, and transportation of cemented carbide spiral hole bars.
Import, storage, quality certificate and purchase order (or contract) content.
This standard is applicable to the processing of carbide spiral hole rods for cutting tools with internal cooling holes (hereinafter referred to as "spiral hole rods").
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 1800.2 Product Geometric Technical Specification (GPS) Linear Dimensional Tolerance ISO Code System Part 2.Standard Tolerance Zone
Code and limit deviation table of hole and shaft
GB/T 5242 Inspection rules and test methods for cemented carbide products
GB/T 5243 Marking, packaging, transportation and storage of cemented carbide products
3 Classification, schematic diagram and model representation rules
3.1 Classification
Spiral hole bars are divided into double spiral hole bars and triple spiral hole bars according to the number of holes. According to the supply status, it is divided into spiral hole blank bar and screw
Spin holes for fine grinding of bars.
3.2 Schematic
The schematic diagram of the double spiral hole blank bar is shown in Figure 1a), and the schematic diagram of the triple spiral hole blank bar is shown in Figure 1b).
a) Schematic diagram of blank bar with double spiral holes b) Schematic diagram of blank bar with three spiral holes
Description.
P ---Pitch, the linear distance of one rotation of the screw thread of the spiral hole bar;
L --- the length of the spiral hole bar;
d --- the hole diameter of the spiral hole bar;
D --- the outer diameter of the spiral hole bar;
e --- eccentricity, which is the distance between the center of the circle where the center of the two or three holes is located and the center of the bar;
TK ---hole spacing, the diameter of the circle where the center of the two or three holes is located.
Figure 1 Schematic diagram of spiral hole bar
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38987-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 38987-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 38987-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38987-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|