HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 3883.201-2017 English PDF

US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3883.201-2017: [Including 2023XG1] Safety of motor-operated hand-held, transportable and garden tools -- Part 2: Particular requirements for drills and impact drills
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 3883.201-2017English519 Add to Cart 5 days [Need to translate] [Including 2023XG1] Safety of motor-operated hand-held, transportable and garden tools -- Part 2: Particular requirements for drills and impact drills Valid GB/T 3883.201-2017

PDF similar to GB/T 3883.201-2017


Standard similar to GB/T 3883.201-2017

GB/T 4343.2   GB/T 3883.311   GB/T 3787   GB/T 3883.208   GB/T 3883.209   GB/T 3883.204   

Basic data

Standard ID GB/T 3883.201-2017 (GB/T3883.201-2017)
Description (Translated English) [Including 2023XG1] Safety of motor-operated hand-held, transportable and garden tools -- Part 2: Particular requirements for drills and impact drills
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K64
Classification of International Standard 25.140.20
Word Count Estimation 26,253
Date of Issue 2017-07-31
Date of Implementation 2018-02-01
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 3883.201-2017: [Including 2023XG1] Safety of motor-operated hand-held, transportable and garden tools -- Part 2: Particular requirements for drills and impact drills


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety of motor-operated hand-held, transportable and garden tools - Part 2. Particular requirements for drills and impact drills ICS 25.140.20 K64 National Standards of People's Republic of China Replacing GB/T 3883.6-2012 Handheld, portable power tools and garden tools Part 2. Particular requirements for electric drills and percussion drills Safetyofmotor-operatedhand-held, transportableandgardentools- Part 2.Particularrequirementsfordrilsandimpactdrils 2017-07-31 Posted 2018-02-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 General Requirements 2 5 test conditions 2 6 Radiation, toxicity and similar hazards 2 7 Categories 2 8 signs and instructions 2 9 to prevent the protection of live parts 3 10 start 3 11 Input power and current 3 12 fever 3 13 heat resistance and flame retardancy 3 Moisture resistance 3 15 rust 3 16 Transformer and its related circuit overload protection 3 Durability 4 18 is not normal operation 4 19 Mechanical danger 5 20 Mechanical strength 5 21 structure 5 22 Internal wiring 6 23 components 6 24 power connection and external cords 6 25 External wire connection terminal 6 26 grounding device 6 27 screws and connectors 6 Creepage distance, clearance and insulation penetration 6 Appendix 13 Appendix I (informative) Measurement of noise and vibration 13 Appendix K (Normative) Battery Tools and Battery Pack 19 Appendix L (normative) to provide power connection or non-isolated battery tools and battery pack 20 References 21

Foreword

Part 2 of GB/T 3883, "Safety of Handheld, Portable Power Tools and Garden Tools" refers to a product that is handheld Moving tools, initially estimated by the following 19 components. --- Part 2. Drill and impact drill special requirements; --- Part 2. Screwdrivers and impact wrenches of the special requirements; --- Part 2. Special requirements for grinders, polishers and disc sanding machines; --- Part 2. Specific requirements for non-disc sanders and polishers; --- Part 2. Circular saw's special requirements; --- Part 2. Hammer special tools requirements; --- Part 2. Electric scissors and electric punching special requirements; --- Part 2. Tapping machine requirements; --- Part 2. Plane specific requirements; --- Part 2. Reciprocating saw (jig saw, knife saw) specific requirements; --- Part 2. Concrete vibrator requirements; --- Part 2. Non-flammable liquid electric gun specific requirements; --- Part 2. Particular requirements for electric nailing machine; --- Part 2. Wood milling and trimming machine special requirements; --- Part 2. Electric stone cutting machine specific requirements; --- Part 2. Pipeline cleaning machine's special requirements; --- Part 2. Binding special requirements; --- Part 2. Band saw special requirements; --- Part 2. Groove machine special requirements. This section GB/T 3883 Part 2. Drill and impact drill special requirements. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 3883.6-2012 "Handheld power tools, safety Part 2. Electric drill and impact drill dedicated to Seeking ", and GB/T 3883.6-2012 the main technical differences are. --- Foreword. General requirements for safety by the GB/T 3883.1-2008 "Safety of handheld power tools Part I. General requirements" Change to GB/T 3883.1-2014 "Handheld, portable power tools and garden tools Safety Part 1. General to Seeking ", the standard name has also made the corresponding changes; --- Increased within the scope of this section For electric drill and impact drill, diamond rock drilling machine and mixer. This section also applies to be able to safety Screwdriver attachment, used as a screwdriver drill; --- Increasing diamond drilling machine in terms and definitions (see 3.103); --- Marks and instructions in the original security aphorisms modified drill safety warning (see 8.1.14.1.1012,.2012 version 8.12.1.1); increase 8.14.2a); --- Modify abnormal operation GB/T 3883.1-2014 Table 4 (see 18.8,.2012 edition 18); --- Mechanical hazards, the introduction of Figure 103 ~ Figure 106, modify the static torque measurement of the stall (see 19.101,.2012 edition 19.101); --- Increased structure. "The maximum output torque of more than 100N · m tools should not be equipped with locking device" requirement; on the switch installation The required length of the test specimen is modified from the "appropriate length" of the original standard to "25 mm" (see 21.18.1.1,.2012 edition 21.18); --- Increase Appendix I (informative) noise and vibration measurements; --- Appendix K replaces Table 4 in this section (see K.18.8). This section should GB/T 3883.1-2014 "hand-held, portable power tools and garden tools Safety Part 1. General Seeking "together. This section states the "applicable" part, said the corresponding provisions of GB/T 3883.1-2014 applicable; this section states the "replacement" part, The provisions of this section shall prevail; this section states the "amendment" part of the corresponding provisions of GB/T 3883.1-2014 related The content should be modified in this section shall prevail, and the other sections of the provisions still apply; This section states the "added" part, that in addition to In line with the corresponding provisions of GB/T 3883.1-2014, but also comply with the provisions of this section. This part is proposed by China Electrical Equipment Industry Association. This part of the National Standardization Technical Committee of electric tools (SAC/TC68) centralized. The main drafting units in this section. Shanghai Electric Tools Institute, Hongda Group Co., Ltd., Makita (China) Co., Ltd., Yangzhou Power Dynamic Tools Co., Ltd., Bode (Suzhou) Precision Manufacturing Co., Ltd., Jiangsu Jinding Power Tools Group Co., Ltd., Quan Feng (China) Trading Limited, Suzhou Bao Electric Tools Co., Ltd., Zhejiang Heng Friends of Electrical and Mechanical Services Limited. The main drafters of this section .Pan Shunfang, Xu Zhongxin, Li Bang Association, Jiang Pengfei, Zhou Yuan, Cao Zhenhua, Gu Jing, Chen Jianqiu, Zhou Bao country, Wang Jian, Chen Qin, Ding Yu only. Handheld, portable power tools and garden tools Part 2. Particular requirements for electric drills and percussion drills

1 Scope

Except as follows, this chapter GB/T 3883.1-2014 applies. increase. This section applies to electric drill and impact drill, diamond rock drilling machine and mixer. This section also applies to the installation of screwdriver accessories, for Electric screwdriver used.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. Except as follows, this chapter GB/T 3883.1-2014 applies. increase. GB/T 700-2006 Carbon structural steel (ISO 630.1995, NEQ) GB/T 9439-2010 gray cast iron (ISO 185.2005, MOD)

3 Terms and definitions

Except as follows, this chapter GB/T 3883.1-2014 applies. Added definition. 3.101 Drill dril A tool with a typical drill chuck or taper for drilling on a variety of materials such as metal, plastic, wood, etc. 3.102 Impact electric drill impactdril A tool with drill chuck designed for drilling on lightweight concrete, masonry and similar materials. Its shape and structure with electric drill Similar, but with a built-in impact mechanism that produces axial impact motion on the rotating output spindle. It can have an attachment that stops the impact mechanism from acting as an ordinary electric drill. 3.103 Diamond rock drilling machine diamondcoredril A drill with a diamond drill attachment, with/without a water or impact mechanism, for use on materials such as concrete or masonry Drilling. 3.104 Mixer mixer Blender is a power tool for mixing paint, putty, mixed marl and similar materials.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3883.201-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3883.201-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3883.201-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3883.201-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.