|
US$409.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38762.3-2020: Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 38762.3-2020 | English | 409 |
Add to Cart
|
4 days [Need to translate]
|
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
| Valid |
GB/T 38762.3-2020
|
PDF similar to GB/T 38762.3-2020
Basic data | Standard ID | GB/T 38762.3-2020 (GB/T38762.3-2020) | | Description (Translated English) | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L55 | | Classification of International Standard | 17.040.10 | | Word Count Estimation | 22,256 | | Date of Issue | 2020-04-28 | | Date of Implementation | 2020-11-01 | | Quoted Standard | GB/T 4249; GB/T 24637.1; GB/T 24637.2; GB/T 24637.3; GB/T 38762.1-2020; GB/T 38762.2 | | Adopted Standard | ISO 14405-3-2016, MOD | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the meaning of the following angular dimension tolerance labels: + and/or a limit deviation, such as 0��/-0.5��; label the upper limit size (ULS) and/or the lower limit size (LLS), such as 35�� max. or 15��min., 34��/36��; with or without modifiers. This standard presents a set of tools for expressing different types of angular dimension features, but does not provide any information on the relationship between function/application and angular dimension features. | GB/T 38762.3-2020: Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geometrical product specifications (GPS)-Dimensional tolerancing--Part 3. Angular sizes
ICS 17.040.10
L55
National Standards of People's Republic of China
Product Geometric Technical Specification (GPS) Dimensional Tolerance
Part 3. Angle dimensions
(ISO 14405-3..2016, MOD)
2020-04-28 release
2020-11-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Contents
Foreword I
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Normative modifiers and symbols 8
5 The default specification operation set for angular dimensions 10
6 Drawing annotation 12
Appendix A (Normative Appendix) Two-Line Angle Dimension Fitting Criteria (Spherical or Prismatic Dimension Elements) 14
Appendix B (informative appendix) The difference between two planes regarded as an angular dimension element and two single elements 15
Appendix C (informative appendix) Overview of angular dimensions Figure 16
Appendix D (Informative Appendix) Relationship with GPS Matrix Model 17
References 18
Foreword
GB/T 38762 "Geometric Technical Specifications (GPS) Dimensional Tolerance" is divided into 3 parts.
--- Part 1. Linear dimensions;
--- Part 2. Dimensions other than linear and angular dimensions;
--- Part 3. Angle dimensions.
This part is Part 3 of GB/T 38762.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the redrafting method to modify the use of ISO 14405-3..2016 "Geometric Technical Specifications of Products (GPS) Dimensional Tolerance Section 3
Part. Angle Dimensions ".
The technical differences between this part and ISO 14405-3..2016 and the reasons are as follows.
--- With regard to normative quotation documents, this part has been adjusted with technical differences to adapt to China's technical conditions and adjustments
The situation is reflected in Chapter 2 "Regulatory Reference Documents", with specific adjustments as follows.
● Replaced ISO 8015 with GB/T 4249 modified to adopt international standards;
● Replaced ISO 17450-1 with GB/T 24637.1 modified to adopt international standards;
● Replaced ISO 17450-2 with GB/T 24637.2 modified to adopt international standards;
● Replaced ISO 17450-3 with GB/T 24637.3 modified to adopt international standards;
● Replaced ISO 14405-1..2016 with GB/T 38762.1-2020, which adopts international standards modified;
● Replaced ISO 14405-2 with GB/T 38762.2 modified to adopt international standards.
The following editorial changes have been made in this section.
--- Take the content of the second paragraph of Chapter 3 as a note;
--- Informative Appendix D adds D.4 related standards.
This part is proposed and managed by the National Product Geometry Technical Standardization Technical Committee (SAC/TC240).
This section was drafted. Xi'an Edward Measuring Equipment Co., Ltd., Xi'an Jiaotong University, China Machine Productivity Promotion Center, China Airlines
Xi'an Aero Engine Co., Ltd., Beijing Times Peak Technology Co., Ltd., Shaanxi Provincial Institute of Metrology, Shanghai Metrology and Testing Technology
Technical Research Institute, Harbin Institute of Technology.
Prospective main drafters of this section. Jing Weixuan, Song Jianzhong, Hao Jianguo, Ming Cuixin, Qu Chaoqing, Zhang Delong, Liu Ying, Liu Yongmeng, Zhu Yue,
Gao Weizhuo.
Product Geometric Technical Specification (GPS) Dimensional Tolerance
Part 3. Angle dimensions
1 Scope
This part of GB/T 38762 establishes the default specification set of angular dimensions, and defines a series of angular dimension elements
Specific specification operation set. cone (truncated such as truncated or untruncated), wedge (truncated or untruncated), two relatively straight lines (from perpendicular to the wedge/truncated)
The plane where the straight line of the broken wedge intersects the wedge/truncated wedge is obtained by the plane containing the axis of the cone/conical table and the phase of the cone/conical table
Obtained), see Figure 1 and Figure 2.
This section also specifies the specification modifiers and drawing annotations of the above angular dimensions.
This section contains the following angular dimensions.
--- Local angle size.
a) Angle dimension between two lines;
b) Partial angular dimensions.
--- Global angle size.
a) Direct global angle dimension;
1) Least square angle dimension;
2) Minimum area angle size.
b) Statistical angular size/indirect global angular size.
1) Maximum angle size;
2) Minimum angle size;
3) Average angle size;
4) Angle size range;
5) Extreme average angle size;
6) Median angle dimension;
7) Standard deviation of angular dimensions.
This section defines the meaning of the following angular dimension tolerance labels.
--- and/or-limit deviation, such as 0 °/-0.5 °;
--- Mark the upper limit size (ULS) and/or lower limit size (LLS), such as 35 ° max. Or 15 ° min., 34 °/36 °;
--- With or without modifiers.
This section gives a series of tools to express the characteristics of different types of angular dimensions, but does not provide any special features about functions/applications and angular dimensions.
Information about the relationship between the levy.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 4249 Product Geometrical Technical Specifications (GPS) Basic concepts, principles and rules (GB/T 4249-2018, ISO 8015.
2011, MOD)
GB/T 24637.1 Geometrical Product Specification (GPS) General Concept Part 1. Geometric Specification and Inspection Model
|