GB/T 37787-2019 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 37787-2019: Metallic materials - Determination of microporosity - Fluorescence method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 37787-2019 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Metallic materials - Determination of microporosity - Fluorescence method
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 37787-2019
GB/T 37787-2019: Metallic materials - Determination of microporosity - Fluorescence method---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37787-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.040.99
H 24
Metallic materials - Determination of microporosity -
Fluorescence method
ISSUED ON: AUGUST 30, 2019
IMPLEMENTED ON: JULY 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Sample preparation ... 5
5 Microscope configuration ... 6
6 Measurement ... 6
7 Measurement accuracy ... 8
8 Result representation ... 10
9 Test report ... 10
Appendix A (Informative) Comparison of pictures before and after fluorescent
infiltration ... 11
Metallic materials - Determination of microporosity -
Fluorescence method
1 Scope
This Standard specifies the sample preparation, microscope configuration,
measurement, measurement accuracy, and test report, etc. for fluorescence
method for the determination of area percentage content of microporosity in
metallic materials.
This Standard applies to the determination of the area percentage content of
microporosity in as-cast metallic materials and 3D printed metallic materials.
The determination of the pore content in other materials such as ceramics,
powder metallurgy materials may refer to it for use.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are
applicable to this document. For the undated references, the latest edition
(including all the amendments) are applicable to this document.
GB/T 8170 Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 13298 Inspection methods of microstructure for metals
GB/T 15749-2008 Measuring method in quantitative metallography
GB/T 30067 Standard Terminology Relating to Metallography
3 Terms and definitions
The terms and definitions defined in GB/T 30067 and the following ones apply
to this document. For ease of use, some of the terms and definitions in GB/T
30067 are repeated below.
3.1 Microporosity
Very fine pores in the casting.
requirements of the corresponding product standard or the agreement between
the two parties. When not required, it shall measure at least 5 random view
fields. It shall avoid the repeat overlay of the view fields and take the average
result as the measured value. According to the product standard or the mutual
agreement, it may also be expressed in terms of the area percentage content
of the most serious view field.
6.2 Measurement methods
6.2.1 Quantitative metallographic manual measurement method
USE fluorescence imaging method of a metallographic microscope to collect
microporosity photographs. According to the provisions of GB/T 15749-2008,
manual testing methods such as grid counting pixels method or microscopic
micrometer eyepiece determination method are used to quantitatively detect
and calculate the area percentage content of microporosity in the sample.
6.2.2 Image analysis measurement method
6.2.2.1 In the image analysis software, open the image to be tested. If the
software for collecting images and the image analysis software belong to the
same software program, it is necessary to check the magnification times of the
image; the analysis and measurement can be directly performed in the image
analysis software. If the software for collecting images and the image analysis
software are software from different manufacturers, the magnification times of
the image shall be checked first; then the image quantitative analysis and
calculation shall be performed.
6.2.2.2 LOAD the ruler.
6.2.2.3 The image is subjected to binary segmentation processing to extract the
microporosity to be tested. The acquired image, whether it is a grayscale image
or a color image, requires binary segmentation numerical processing on the
object to be tested. EXTRACT the binary segmentation graph of the object to
be tested and then calculate.
6.2.2.4 The function of measuring the percentage content of two-phase or multi-
phase area in image analysis is selected, to measure the area percentage
content of the extracted microporosity.
6.2.2.5 In case of dispute, the image analysis measurement method is used as
the arbitration method.
8 Result representation
8.1 If the product technical standard or the agreement between the supplier and
the purchaser requires to report the area percentage content of the
microporosity of the most serious view field, then the microporosity content is
expressed as a percentage. Retain one significant digit after the decimal point.
The rules of rounding off shall be in accordance with GB/T 8170.
8.2 Unless otherwise specified, the measurement result of area percentage
content of microporosity may be expressed by S±95%Cl (%RA).
9 Test report
The test report should include the following:
a) This Standard number;
b) Sample name, material, and specifications;
c) The ratio of fluorescent infiltrant, vacuum degree, infiltration time;
d) The area percentage content of microporosity;
e) Test report number and date.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 37787-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37787-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 37787-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37787-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37787-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 37787-2019?A step-by-step guide to download PDF of GB/T 37787-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 37787-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|