Path: Home > GB/T > Page385 > GB/T 37672-2019 Home > Standard_List > GB/T > Page385 > GB/T 37672-2019
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37672-2019 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Remanufacturing - Technical specification for plasma cladding
| Valid |
GB/T 37672-2019
|
PDF similar to GB/T 37672-2019
Basic data | Standard ID | GB/T 37672-2019 (GB/T37672-2019) | | Description (Translated English) | Remanufacturing - Technical specification for plasma cladding | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 25.220 | | Word Count Estimation | 10,195 | | Date of Issue | 2019-06-04 | | Date of Implementation | 2020-01-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37672-2019: Remanufacturing - Technical specification for plasma cladding---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Remanufacturing--Technical specification for plasma cladding
ICS 25.220
J04
National Standards of People's Republic of China
Remanufacturing plasma cladding technical specification
Published on.2019-06-04
2020-01-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 1
5 Process 2
6 Quality Control and Inspection 3
7 Packaging, storage and transportation 4
8 Site, labor safety and environmental protection requirements 4
Reference 5
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed and managed by the National Green Manufacturing Technology Standardization Technical Committee (SAC/TC337).
This standard was drafted. National Defense Science and Technology Key Laboratory of Equipment Remanufacturing Technology, Hebei Jinjin Remanufacturing Industry Technology Research Co., Ltd.
Division, Beijing Ruiman Technology Co., Ltd., National Academy of Sciences, Academy of Military Sciences, National Institute of Standardization, Hefei
Industrial University, China Machine Productivity Promotion Center, Zibo Zhongke New Technology Research Institute, China Railway Construction Heavy Industry Group Co., Ltd., China National Heavy Duty Truck Group
Nanfuqiang Power Co., Ltd., the 5th and 19th factories of the People's Liberation Army, Guangdong Huasheng Intelligent Remanufacturing Co., Ltd., Taian City
Volume Supervision and Inspection Institute, Chengdu Pengcheng Transportation Group Co., Ltd., Qinhuangdao Tianye Tonglian Heavy Industry Co., Ltd., Hebei Ruizhao Laser Remanufacturing
Manufacturing Technology Co., Ltd., Zhangzhou Geruite Drill Co., Ltd.
The main drafters of this standard. Lu Yaohui, Zhang Wei, Liu Yuxin, Xu Binshi, Wang Kaibo, Hu Zhenfeng, Wang Xiuteng, Shi Peijing, Zhou Xinyuan, Sun Zhe,
Liu Yihai, Zheng Handong, Wei Min, Gao Hongwei, Sun Tingting, Fan Liguo, Liu Feixiang, Luo Jianming, Hou Tinghong, Guo Dongjun, Lu Zhengjie, Liu Maoyuan,
Qin Qianyun, Han Hongsheng, Zhang Zhankui.
Introduction
With the improvement of the reliability of industrial plasma equipment, the maturity of automated production processes and the continuous advancement of plasma cladding technology,
Remanufacturing of key components of damage in industries such as power, energy, metallurgy, and machinery has been widely applied and achieved significant economic benefits.
Benefits and social benefits.
In order to standardize the process flow of remanufacturing plasma cladding technology and promote the orderly development of the industry, this standard has been formulated.
Remanufacturing plasma cladding technical specification
1 Scope
This standard specifies the general requirements, process, quality control and inspection, and package for the application of plasma cladding technology for component remanufacturing.
Packing, storage and transportation, site, labor safety and environmental protection requirements.
This standard applies to remanufacturing production, scientific research and management based on plasma cladding technology, and other related work can also be used.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Low-magnification structure and defect acid etching test method for GB/T 226 steel
GB/T 5616 Non-destructive testing application guidelines
GB/T 12444 metal material wear test method test ring - test block sliding wear test
GB/T 19291 General principles for corrosion corrosion testing of metals and alloys
JB/T 6050 General rules for hardness testing of heat treated parts of steel
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Plasma cladding
Under the action of plasma arc, the alloy powder or wire and the surface of the workpiece substrate are rapidly heated and melted, mixed, diffused, reacted and solidified.
A wear layer or other functional layer is formed on the surface of the workpiece.
3.2
Arc static characteristic staticcharacteristicofarc
In the case where the electrode material, the gas medium, and the arc length are constant, the relationship between the welding current and the arc voltage changes when the arc is stably burned.
[GB/T 3375-1994, definition 3.21]
3.3
Plasma gas orificegas
A gas used to create a plasma arc when plasma is welded, cut, and sprayed.
Note. Rewritten from GB/T 3375-1994, definition 3.135.
4 General requirements
4.1 Cladding equipment
4.1.1 Plasma Cladding Power Supply
Plasma cladding power supplies should meet the following performance requirements when used.
Price & DeliveryUS$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37672-2019: Remanufacturing - Technical specification for plasma cladding
Status: Valid
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37672-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37672-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37672-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37672-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |