|
US$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37556-2019: Insulating aerial device for 10 kV live working
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37556-2019 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Insulating aerial device for 10 kV live working
| Valid |
GB/T 37556-2019
|
PDF similar to GB/T 37556-2019
Basic data | Standard ID | GB/T 37556-2019 (GB/T37556-2019) | | Description (Translated English) | Insulating aerial device for 10 kV live working | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K47 | | Classification of International Standard | 29.240.20 | | Word Count Estimation | 22,264 | | Date of Issue | 2019-06-04 | | Date of Implementation | 2020-01-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37556-2019: Insulating aerial device for 10 kV live working---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Insulating aerial device for 10 kV live working
ICS 29.240.20
K47
National Standards of People's Republic of China
Insulated bucket car for 10kV live working
Published on.2019-06-04
2020-01-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Category 2
5 Technical requirements 3
6 Test method 7
7 Inspection rules 15
8 logos, logos, documents 16
9 Storage and transportation 16
Appendix A (Normative) Functional Configuration Table 17
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Electricity Council.
This standard is under the jurisdiction of the National Standardization Technical Committee for Live Working (SAC/TC36).
This standard was drafted. China Electric Power Research Institute Co., Ltd., State Grid Co., Ltd., State Grid Zhejiang Electric Power Co., Ltd.
Net Hubei Power Co., Ltd., State Grid Shandong Power Company, State Grid Liaoning Power Co., Ltd., State Grid Jiangsu Power Co., Ltd.,
Net Heilongjiang Electric Power Co., Ltd., State Grid Anhui Electric Power Co., Ltd., State Grid Shanghai Electric Power Company, State Grid Henan Electric Power Company, State Grid
Tianjin Electric Power Company, State Grid Sichuan Electric Power Company.
The main drafters of this standard. Xiao Bin, Ning Wei, Liu Kai, Huang Songquan, Liu Ting, Ma Zhenyu, Li Sheng, Zuo Xinbin, Yang Xiaoxiang, Shi Bin, Wang Gang,
Gao Yongqiang, Su Yuming, Lei Xinglie, Li Zhankui, Ling Song, Wen Yan, Ji Kunhua, Guo Jianli, Liu Zhaoling, Wu Chi.
Insulated bucket car for 10kV live working
1 Scope
This standard specifies the classification, composition, technical requirements, test methods, inspection rules, storage and storage of 10kV insulated arm vehicles for live working.
transport.
This standard applies to insulated arm vehicles for live working at 10kV and below.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 507 insulating oil breakdown voltage measurement method
GB/T 1332 Cargo Modeling Test Procedure
GB 1589 Car, trailer and car train profile size, axle load and mass limit
GB/T 3181 paint film color standard
General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components
GB 4785 Installation regulations for external lighting and light signal devices for automobiles and trailers
GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB 7258 Motorcycle Operation Safety Technical Conditions
General technical conditions for GB/T 7935 hydraulic components
GB/T 9465 aerial work vehicle
GB 11567 Protection requirements for side and rear parts of automobiles and trailers
GB/T 12428 passenger car loading quality calculation method
GB/T 12467.3 Welding quality requirements for metallic materials - Part 3. General quality requirements
GB/T 13043 Bus Styling Test Procedure
GB/T 14039-2002 Hydraulic transmission oil solid particle pollution level code
GB 15741 car and trailer number plate (rack) and its position
GB/T 16471 transport package size and quality boundaries
GB/T 18411 Motor vehicle product signage
GB 19151 triangular warning sign for motor vehicles
GB 23254 truck and trailer body reflective logo
DL/T 974 Toolbox for live working
QC/T 252 special vehicle type test procedure
QC/T 484 automotive paint coating
3 Terms and definitions
The following terms and definitions apply to this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37556-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37556-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37556-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37556-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|