|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37476-2019: Marine swing and rotate angle hydraulic cylinder
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37476-2019 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Marine swing and rotate angle hydraulic cylinder
| Valid |
GB/T 37476-2019
|
PDF similar to GB/T 37476-2019
Standard similar to GB/T 37476-2019 GB/T 589 GB/T 592 GB/T 37533 GB/T 12919 Basic data | Standard ID | GB/T 37476-2019 (GB/T37476-2019) | | Description (Translated English) | Marine swing and rotate angle hydraulic cylinder | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U57 | | Classification of International Standard | 47.020.30 | | Word Count Estimation | 18,141 | | Date of Issue | 2019-05-10 | | Date of Implementation | 2019-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37476-2019: Marine swing and rotate angle hydraulic cylinder---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Marine swing and rotate angle hydraulic cylinder
ICS 47.020.30
U57
National Standards of People's Republic of China
Marine swing angle hydraulic cylinder
Published on.2019-05-10
2019-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed and managed by the National Marine Machinery Standardization Technical Committee (SAC/TC137).
This standard was drafted. China Shipbuilding Industry Comprehensive Technology and Economic Research Institute, Jiangsu Longcheng Hongli Hydraulic Equipment Co., Ltd., Hohai University.
The main drafters of this standard. Yan Chao, Xiao Xiaolong, Liu Hong, Zhang Gengyi, Xie Jianwu, Li Longhua, Xing Xizhe, Wen Liang, Wu Zhongming, Wang Huizhen,
Wang Hao, Zeng Yongjun.
Marine swing angle hydraulic cylinder
1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of marine swinging angle hydraulic cylinders.
This standard applies to the design, manufacture and acceptance of swinging angle hydraulic cylinders used on various types of ships and offshore platforms.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 1176-2013 Cast copper and copper alloy
GB/T 1184-1996 Shape and position tolerances without tolerance values
GB/T 1348-2009 Ductile iron castings
GB/T 1804-2000 General tolerances and tolerances for linear and angular dimensions without tolerances
GB/T 3077-2015 alloy structural steel
General technical conditions for GB/T 7935 hydraulic components
GB/T 13306 signage
GB/T 13342-2007 General technical requirements for marine reciprocating hydraulic cylinders
GB/T 14039-2002 Hydraulic transmission oil solid particle pollution level code
GB/T 15622-2005 Hydraulic cylinder test method
GB/T 17107-1997 Structural steel grades and mechanical properties for forgings
GB/T 17446 Fluid Transmission System and Component Vocabulary
CB1146.2 Environmental Test and Engineering Guidelines for Ship Equipment
CB1146.3 Marine equipment environmental test and engineering guidelines for high temperature
CB1146.8 Marine equipment environmental test and engineering guidelines Tilt and sway
CB1146.12 Environmental Test and Engineering Guide for Ship Equipment Salt Spray
JB/T 7858 Hydraulic component cleanliness evaluation method and hydraulic component cleanliness index
3 Terms and definitions
The following terms and definitions as defined in GB/T 17446 apply to this document.
3.1
Swing angle hydraulic cylinder swingandrotateanglehydrauliccylinder
One end adopts fixed pin shaft oil distribution structure to ensure the position of the oil port during swinging and cornering, which is used in lifting and lowering equipment.
Special hydraulic cylinders with variable width and folding arm functions.
3.2
Cylinder unit output force unitcylinderforce
The calculated value of the theoretical output force of the hydraulic cylinder per MPa pressure.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37476-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37476-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37476-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37476-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|