|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37432-2019: Full face tunnel boring machine remanufacturing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37432-2019 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Full face tunnel boring machine remanufacturing
| Valid |
GB/T 37432-2019
|
PDF similar to GB/T 37432-2019
Basic data | Standard ID | GB/T 37432-2019 (GB/T37432-2019) | | Description (Translated English) | Full face tunnel boring machine remanufacturing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Classification of International Standard | 91.220 | | Word Count Estimation | 18,186 | | Date of Issue | 2019-05-10 | | Date of Implementation | 2019-12-01 | | Quoted Standard | GB/T 150.1; GB/T 150.2; GB/T 150.3; GB/T 150.4; GB/T 151; GB/T 307.2; GB/T 12467.1; GB/T 12467.2; GB/T 12467.3; GB/T 12467.4; GB/T 12467.5; GB/T 13306; GB/T 17491; GB/T 23253; GB/T 27611; GB/T 32804; GB/T 34650; GB 50150; GB 50171; GBZ 188; JB/T 10205 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the general requirements, main system and component requirements, safety requirements, environmental protection, acceptance methods, signs, etc. for the remanufacturing of full-section tunnel boring machines. This standard applies to the remanufacturing of waste/used full-face tunnel boring machines. | GB/T 37432-2019: Full face tunnel boring machine remanufacturing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Full face tunnel boring machine remanufacturing
ICS 91.220
P97
National Standards of People's Republic of China
Full-section tunnel boring machine remanufacturing
Published on.2019-05-10
2019-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 2
5 Mainframe and main components requirements 5
6 Rear equipment and auxiliary system requirements 7
7 Safety and environmental requirements 11
8 Acceptance method 11
9 accompanying documents 11
10 logo 12
Appendix A (informative) Full-section tunnel boring machine remanufacturing process 13
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Construction Machinery and Equipment Standardization Technical Committee (SAC/TC328).
This standard was drafted. State Key Laboratory of Shield and Tunneling Technology, China Railway Tunnel Bureau Group Co., Ltd., China Railway Construction Heavy Industry Group
Co., Ltd., North Heavy Industry Equipment (Shenyang) Co., Ltd., China Railway First Bureau Group Urban Rail Transit Engineering Co., Ltd., China Railway Second Bureau Project
Limited company Chengtong branch, Xugong Group Kaigong Heavy Industry Nanjing Co., Ltd., Jinan Heavy Industry Co., Ltd., China Shipbuilding Heavy Industry (Qingdao) track
Tong Equipment Co., Ltd., Jinan China Railway Heavy Industry Rail Equipment Co., Ltd., Sichuan Kun Chengrun Technology Co., Ltd., China Railway Fourth Bureau Group Co., Ltd.
China Railway Engineering Equipment Group Co., Ltd., Chongqing Rui Ante Shield Technology Co., Ltd., Lixin Measurement (Shanghai) Co., Ltd., Beijing Architecture
Mechanization Research Institute Co., Ltd., China Water Resources and Hydropower Third Engineering Bureau Co., Ltd.
The main drafters of this standard. Zhou Jianjun, Hong Kairong, Cheng Yongliang, Liu Shubing, Wang Jiangka, Yang Jun, Su Yanqi, Lu Qingliang, Wang Xiaoqiang, Gao Aizhao,
Ren Rongzhi, Deng Nengwei, Zhao Xinhe, Wang Bin, Zhang Xiaori, Zhang Yulin, Li Jing, Yang Luwei, Ma Chengbiao, Chang Haichao, Chen Wenyuan, Fu Xiaoyong, Liu Shuang,
Zhao Decheng, Xu Jingwei, Wang Yidong, Li Bin, Deng Bin, Lu Yue, Jia Yaowei, Chen Yu, Xu Dongxu, Huang Jimin, Guo Wei.
Full-section tunnel boring machine remanufacturing
1 Scope
This standard specifies the general requirements for the remanufacturing of full-face tunnel boring machines, main system and component requirements, safety requirements and environmental protection,
Acceptance methods, signs, etc.
This standard applies to the remanufacturing of waste/old full-section tunnel boring machines.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 150 (all parts) pressure vessel
GB/T 151 heat exchanger
GB/T 307.2 Principles and methods for measurement and inspection of rolling bearings
GB/T 12467 (all parts) Metal material welding quality requirements
GB/T 13306 signage
Test and expression method of steady state performance of GB/T 17491 hydraulic pump, motor and integral transmission
GB/T 23253 hydraulic transmission electric control hydraulic pump performance test method
GB/T 27611 Recycling and remanufactured products General requirements and markings
Technical specification for remanufacturing and dismantling of GB/T 32804 earthmoving machinery parts
GB/T 34650 full-section tunnel boring machine shield machine safety requirements
GB 50150 Electrical installation engineering electrical equipment handover test standard
GB 50171 Electrical installation engineering panel, cabinet and secondary circuit wiring construction and acceptance specifications
GBZ 188 Occupational Health Monitoring Technical Specifications
JB/T 10205 hydraulic cylinder
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Full face tunnel boring machine fulfacetunnelboringmachine
The tunnel is fully profiled by excavation and propulsion, and special mechanical equipment with peripheral casing is provided. Mainly including shield machines,
Rock tunnel boring machine, pipe jacking machine, etc.
[GB/T 34354-2017, definition 2.1]
3.2
Full-section tunnel boring machine remanufacturing fulfacetunnelboringmachineremanufacturing
Based on the manufacturing mode of waste/old full-section tunnel boring machine resource recycling, applying new materials, new processes and new technologies to waste/old
The face tunnel boring machine is repaired and modified to make its function, performance, environmental protection, economy and safety characteristics not lower than a series of technical measures for the prototype new machine.
Construction or engineering activities.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37432-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37432-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37432-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37432-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|