|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37166-2018: Non-destructive testing -- Test method of composite materials for industrial computed tomography (CT)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37166-2018 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Non-destructive testing -- Test method of composite materials for industrial computed tomography (CT)
| Valid |
GB/T 37166-2018
|
PDF similar to GB/T 37166-2018
Basic data | Standard ID | GB/T 37166-2018 (GB/T37166-2018) | | Description (Translated English) | Non-destructive testing -- Test method of composite materials for industrial computed tomography (CT) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 19.100 | | Word Count Estimation | 14,120 | | Date of Issue | 2018-12-28 | | Date of Implementation | 2019-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37166-2018: Non-destructive testing -- Test method of composite materials for industrial computed tomography (CT)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing--Test method of composite materials for industrial computed tomography (CT)
ICS 19.100
J04
National Standards of People's Republic of China
Non-destructive testing composite industry computer tomography
(CT) detection method
Published on.2018-12-28
2019-07-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General requirements 1
5 Industrial CT System Requirements 1
6 Detection process 2
7 Test and evaluation 4
8 Test records and reports 5
Appendix A (informative appendix) Composite parts industrial CT inspection process card 6
Appendix B (Normative Appendix) Composite Defects Industrial CT Image 7
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed and managed by the National Non-Destructive Testing Standardization Technical Committee (SAC/TC56).
This standard was drafted. Chongqing University, Shanghai Materials Research Institute, Chongqing Zhentai Technology Co., Ltd., Hubei Sanjiang Aerospace Jiangbei Machinery
Engineering Co., Ltd., Aerospace Materials and Technology Research Institute, China Aerospace Beijing Aviation Materials Research Institute, China Shipbuilding Industry Corporation, No. 72
The Fifth Institute, the Fifth Institute of China Ordnance Industry Group, the Ningbo Branch of the China Academy of Ordnance Science, and the China Aerospace Science and Industry Group
Institute, Aerospace Science and Technology Wuhan Magnetoelectric Co., Ltd.
The main drafters of this standard. Duan Liming, Lu Yanping, Shen Kuan, Zhou Rifeng, Jiang Jiansheng, Wang Xiaoyong, Ren Huayou, Guo Guangping, Wang Qianni, Fan Ningbo,
Li Hongwei, Zhao Fubao, Wang Congke, Guo Zhimin, Zhang Weiguo, Jiang Baihong, Fan Tingting, Liu Rongzhen.
Non-destructive testing composite industry computer tomography
(CT) detection method
1 Scope
This standard specifies the general requirements for computer tomography (CT) testing of composite X-ray industry, industrial CT system requirements, inspection
Measurement process, test assessment, test record and report.
This standard is applicable to the detection of density distribution and material uniformity of composite materials such as resin base, ceramic base and metal base, and pores (pores) and cracks.
Detection of defects such as lines, inclusions, delamination, folding and wrinkles.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 29034 Non-Destructive Testing Industrial Computer Tomography (CT) Guide
GB/T 29067 Non-destructive testing industrial computer tomography (CT) image measuring method
GB/T 29068 Non-destructive testing industrial computer tomography (CT) system selection guide
GB/T 29069 Non-destructive testing industrial computer tomography (CT) system performance test method
GB/T 29070 Non-destructive testing industrial computer tomography (CT) testing general requirements
GB/T 34365 Non-destructive testing terminology industrial computer tomography (CT) detection
GB/T 35839 Non-destructive testing industrial computer tomography (CT) density measurement method
GB/T 37158 Non-destructive testing industrial computer tomography (CT) testing method
3 Terms and definitions
The terms and definitions defined in GB/T 34365 apply to this document.
4 General requirements
The requirements for the inspection personnel, testing room, control room and radiation protection safety shall comply with the relevant provisions of GB/T 29070.
5 Industrial CT system requirements
5.1 Basic requirements
5.1.1 The subsystems of the industrial CT system are configured in accordance with the requirements of GB/T 29068.
5.1.2 Before selecting an industrial CT system, the characteristics of the composite material to be inspected, such as geometric size, quality, material composition, and defect status, should be analyzed.
The characteristics of the composite material examined determine the parameters of the mechanical scanning system, the ray source system, and the detection system in the industrial CT system. For example,
The maximum weight and maximum diameter of the composite material determine the parameter range of the object to be inspected by the industrial CT system, and the defect status of the composite material to be inspected
Different or different testing requirements may also lead to large differences in industrial CT systems.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37166-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 37166-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37166-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37166-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|