|
US$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36414-2018: Process measurement and control device -- Specification for evaluating instruments fault tolerance performance
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36414-2018 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Process measurement and control device -- Specification for evaluating instruments fault tolerance performance
| Valid |
GB/T 36414-2018
|
PDF similar to GB/T 36414-2018
Basic data | Standard ID | GB/T 36414-2018 (GB/T36414-2018) | | Description (Translated English) | Process measurement and control device -- Specification for evaluating instruments fault tolerance performance | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N11 | | Classification of International Standard | 25.040.40 | | Word Count Estimation | 22,291 | | Date of Issue | 2018-06-07 | | Date of Implementation | 2019-01-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36414-2018: Process measurement and control device -- Specification for evaluating instruments fault tolerance performance
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Process measurement and control device--Specification for evaluated instruments fault tolerance performance
ICS 25.040.40
N11
National Standards of People's Republic of China
Industrial process measurement and control
Fault tolerance performance specification
Published on.2018-06-07
2019-01-01 Implementation
National Market Supervision Administration
China National Standardization Administration released
Directory
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Category 2
4.1 Overview 2
4.2 Classification by Fault Tolerance 3
4.3 Content Classification by Fault Tolerance 3
4.4 Carrier Classification by Fault Tolerance Measures 3
5 Technical requirements 3
5.1 Default State 3
5.2 Preventive Fault Tolerance 4
5.3 Warning Fault Tolerance 4
5.4 Acceptable Fault Tolerance 5
5.5 Error Correction Fault Tolerance 6
6 Test method 6
6.1 Overview 6
6.2 Preventive Fault Tolerance 6
6.3 Warning Fault Tolerance 7
6.4 Acceptable Fault Tolerance 7
6.5 Error Correction Fault Tolerance 8
7 Evaluation Report 8
Appendix A (Informative) Introduction to Fault Tolerance Measures 11
Appendix B (Informative) Acceptable Fault Tolerance in Special Environments 13
Reference 16
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents.
This standard is proposed by China Machinery Industry Federation.
This standard is under the jurisdiction of the National Industrial Process Measurement, Control, and Automation Standardization Technical Committee (SAC/TC124).
This standard was drafted by Shanghai Industrial Automation Instrument Research Institute Co., Ltd.
Participated in the drafting of this standard. Beijing Guangli Nuclear System Engineering Co., Ltd., Beijing Ruipu Sanyuan Jiji Technology Co., Ltd., Shunchang, Fujian
Hongrun Precision Instrument Co., Ltd., Shanghai Weltech Industrial Automation Co., Ltd., Zhejiang Zhongkong Automation Instrumentation Co., Ltd., Shanghai
Dynamic Instrument Co., Ltd., University of Shanghai for Science and Technology, Southwest University.
The main drafters of this standard. Fan Yi, Jiang Guojin, Bai Tao, Li Zhenzhong, Chen Zhiyang, Li Chengsheng, Chen Yu, Ni Min, Wang Yagang, Zhou Xuelian, Wang Jun,
Li Minghua, Su Xingli, Sun Yongbin, Meng Guangguo, Liang Zhongqi, Long Wei, Zhao Yong, Lu Xiuhong, Liu Chunming.
Industrial process measurement and control
Fault tolerance performance specification
1 Scope
This standard specifies the terms, classifications, technical requirements, test methods, and evaluation reports for industrial process measurement and control instrument misuse and fault tolerance.
This standard is applicable to the evaluation of misuse of fault-tolerant performance of industrial process measurement and control instruments.
Note. Fault tolerance has a wide range of meanings. Fault tolerance in this standard is limited to the misuse of fault tolerance defined in 3.3. In particular, this standard does not include modules in the instrument
The type of fault tolerance that continues to maintain correct operation results under faults does not include those that involve safety-related fault tolerance. Involving electrical safety, explosion-proof safety, and work
The security standards can be enforced when various security contents such as security are available.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 18271.1-2017 Process measurement and control equipment General performance assessment methods and procedures Part 1. General
GB/T 18271.4 Method and procedure for general performance assessment of process measurement and control devices Part 4. Content of assessment report
3 Terms and Definitions
The terms and definitions defined in GB/T 18271.1-2017 and the following apply to this document.
3.1
Reasonably foreseen misuse of reasonablyforeseeable misuse
The use of products and/or systems not provided by the supplier, caused by the behavior of easily foreseen people.
[GB/T 20002.4-2015 [2], Definition 3.7]
3.2
Persistent failure persistentfault
The fault will remain until the fault is corrected by some intervention.
Note. The term "intervention" can be modified or repaired.
[GB/T 2900.99-2016 [1], definition 192-04-04]
3.3
Misuse of fault tolerance faulttoleranceofmisuse
In the event of misuse that can reasonably be foreseen, the equipment can still perform some of the specified functions, or it will not cause continuous failure of the equipment.
3.4
Fault insert faultinsertion
Actual faults are introduced into the hardware and software of the device to check whether the device's behavior under fault conditions meets fault-tolerant design requirements.
Fault-tolerant mechanisms or performance are evaluated.
3.5
Protective measures protectivemeasure
Actions or measures to eliminate danger or reduce risk.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36414-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36414-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36414-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36414-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|