|
US$219.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36152-2018: Safety assessment code of practice of rack and pinion hoists for persons and materials
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36152-2018 | English | 219 |
Add to Cart
|
3 days [Need to translate]
|
Safety assessment code of practice of rack and pinion hoists for persons and materials
| Valid |
GB/T 36152-2018
|
PDF similar to GB/T 36152-2018
Basic data | Standard ID | GB/T 36152-2018 (GB/T36152-2018) | | Description (Translated English) | Safety assessment code of practice of rack and pinion hoists for persons and materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 91.140.90 | | Word Count Estimation | 11,160 | | Date of Issue | 2018-05-14 | | Date of Implementation | 2018-12-01 | | Regulation (derived from) | National Standards Announcement No. 6 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36152-2018: Safety assessment code of practice of rack and pinion hoists for persons and materials
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Rack and pinion type personal and goods construction lift safety assessment procedures)
ICS 91.140.90
J80
National Standards of People's Republic of China
Rack and pinion type dual-purpose construction elevator
Safety assessment procedure
Published on.2018-05-14
2018-12-01 Shi
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Lifting Work Platform Standardization Technical Committee (SAC/TC335).
This standard was drafted. Shanghai Academy of Building Research, China Academy of Building Research Construction Mechanization Research Branch, Chongqing Special
Equipment Inspection and Research Institute, National Construction Urban Construction Machinery Quality Supervision and Inspection Center, Shanghai Baoda Construction Machinery Co., Ltd., Guangzhou Jinglong Engineering
Machinery Co., Ltd., Hubei Jianghan Construction Engineering Machinery Co., Ltd., Shanghai Academy of Building Science and Technology Development Co., Ltd., Henan Province
Building Science Research Institute Co., Ltd., Guangxi Construction Engineering Group Construction Machinery Manufacturing Co., Ltd., Longyuan Construction Group Co., Ltd.
The main drafters of this standard. Chen Aihua, Zheng Jun, Zhang Lei, Lu Hongwei, Zheng Yi'an, He Zhenchu, Liu Yuejin, Wu Guangbin, Cao Wei, Wang Yunfei,
Yan Leng, Lin Yong, Zheng Min.
Rack and pinion type dual-purpose construction elevator
Safety assessment procedure
1 Scope
This standard specifies the gear-and-pinion-type dual-purpose construction lifts (hereinafter referred to as lifts) defined in GB/T 26557-2011.
Full evaluation method.
This standard is applicable to elevators for construction construction. Lifts for other purposes can be referred to.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 18851.1 Non-destructive testing - Penetration testing - Part 1. General
GB/T 26557-2011 Cage with vertical guide for people and goods construction elevator
GB/T 26951 weld non-destructive testing magnetic particle testing
GB/T 26952 weld non-destructive testing weld magnetic particle inspection acceptance level
GB/T 26953 weld non-destructive testing weld penetration inspection acceptance level
GB/T 34023 Construction elevator safety use procedures
JB/T 10559 hoisting machinery non-destructive testing steel weld ultrasonic testing
3 Terms and definitions
The following terms and definitions as defined in GB/T 26557-2011 apply to this document.
3.1
Safety assessment safetyassessment
Inspection and measurement of equipment structure and parts wear, corrosion, cracks, deformation, etc., on the operating conditions and carrying capacity of the whole machine
Conduct an experiment to determine whether it can be used normally, degraded or not available (hereinafter referred to as evaluation).
3.2
Downgrade using degradeapplication
Due to the structural, component or safety performance, the original design requirements cannot be met. According to the provisions of this standard, the technical use of the equipment to be evaluated is reduced.
The number or limit of the use of features. Degraded use is divided into two types. mild degraded use and severely degraded.
4 Evaluation method
4.1 General
The main contents of the lift evaluation include data inspection, disintegration inspection, operation test and machine evaluation, as follows.
a) Data inspection includes equipment technical documents and safety technical files. Incomplete identification, no maintenance records, no retrospective manufacturing, change
Lifts that make and repair information should not be evaluated;
b) Disintegration inspections shall include inspection of metal structures, major components and safety devices. The focus of the disintegration inspection is on the metal structure.
On the basis of comprehensive visual inspection, the parts are subjected to random inspection, such as corrosion, wear, cracks and deformation. Main components,
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36152-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36152-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36152-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36152-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|