|
US$344.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35530-2017: Gas mixtures -- Gravimetric preparation -- Mastering correlations in composition
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35530-2017 | English | 344 |
Add to Cart
|
3 days [Need to translate]
|
Gas mixtures -- Gravimetric preparation -- Mastering correlations in composition
| Valid |
GB/T 35530-2017
|
PDF similar to GB/T 35530-2017
Basic data | Standard ID | GB/T 35530-2017 (GB/T35530-2017) | | Description (Translated English) | Gas mixtures -- Gravimetric preparation -- Mastering correlations in composition | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G86 | | Classification of International Standard | 71.100.20 | | Word Count Estimation | 18,143 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Regulation (derived from) | National Standards Bulletin 2017 No. 32 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 35530-2017: Gas mixtures -- Gravimetric preparation -- Mastering correlations in composition---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Gas mixtures - Gravimetric preparation - Mastering correlations in composition
ICS 71.100.20
G86
National Standards of People's Republic of China
Mixed Gas Weighing Preparation Components Dependence Control
(ISO /T S29041.2008, IDT)
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method identical with ISO /T S29041.2008 "mixed gas Weighing Preparation of component-related control."
The documents of our country that are consistent with the corresponding international documents that are normative references in this standard are as follows.
Preparation of gas mixtures for gas analysis and calibration - Weighing method (ISO 6142.2001, IDT).
This standard compared with ISO /T S29041.2008 (E), made the following editorial changes.
--- Corrigendum will be included in the text of the contents, that is, in Table 8 will be "not consider the relevance of the U (value)" to "do not consider the relevance of u
(value)".
--- Fixed an error in ISO /T S29041.2008, Formula (A.9) will be "
x
pi
"To" G
pi
"," x
pj
"To" G
pj
".
This standard proposed by the China Petroleum and Chemical Industry Federation.
This standard by the National Gas Standardization Technical Committee (SAC/TC206) centralized.
This standard was drafted. Southwest Chemical Research and Design Institute Co., Ltd., China Institute of Metrology, Sichuan University, Guangdong Huate Gas Unit
Co., Ltd., Shanghai Hua love chromatography Technology Co., Ltd.
The main drafters of this standard. He Doushan, Han Yongzhi, Peng Guohua, Chen Yali, Liao Heng Yi, Du Hansheng, Fang Hua, Zhang Jun, Zhao Rong, Fang Ai Li.
Mixed Gas Weighing Preparation Components Dependence Control
1 Scope
This standard on the ISO 6142 weighing gas mixture prepared by the inherent factors and the impact of data processing were discussed
Theory and explanation.
All calculations in this standard are based on the preparation of synthetic natural gas with the target composition of nitrogen 1.4% (mole fraction), carbon dioxide
1.8% by mole, ethane 9.4% by mole, propane 3.4% by mole, n-butane 1% by mole, methane 83%
(Mole fraction).
In this case, all matters relating to the viability of the gas mixture, the selection of preparation procedures and the weighing procedure and sequence are related to ISO 6142
In the same rules. The same applies to the relevant estimates of the sources of basic uncertainty and to the purity tables for each preparation gas.
All calculations in this standard use the calculation principles, tools, and algorithms described in Appendix A. In order to simplify the space used in the calculation
Matrix transformation, matrix inversion, matrix calculations and other procedural steps are not specific to each use to expand the description.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 6142 Gas Analysis Calibration Preparation of mixed gas Weighing method (Gasanalysis-Preparationofcalibration
gasmixtures-Gravimetricmethod)
3 Symbols and abbreviations of terms
CVi gas component i calorific value, i = 1, n
CV mixed gas calorific value
G describes the system of model equations for the measured variables
J Jacobian matrix
m quality
mg The mass of the gas component in a gas cylinder of a gas mixture obtained by weighing
mm The mass of the mixed gas cylinder and the reference cylinder is poor after the corresponding filling procedure is completed
mx Corresponds to the corrected mass (corrected value) of the mixed gas cylinder and the reference cylinder after the filling step is completed
Mi Molar mass of gas component i, i = 1, n
M The molar mass of the mixed gas
Q transfer matrix
U (x) Expansion of the numerical uncertainty of x
u (x) The standard uncertainty of the value x
u2 (pi, pj) variance of the value pi (i = j) or pi and pj covariance (i ≠ j)
uB buoyancy correction (see note)
uexp cylinder inflation correction
um balance indication of the uncertainty (cumulative estimate)
|