| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35381.6-2017 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Tractors and machinery for agricultural and forestry -- Serial control and communications data network -- Part 6: Virtual terminal
| Valid |
GB/T 35381.6-2017
|
PDF similar to GB/T 35381.6-2017
Basic data | Standard ID | GB/T 35381.6-2017 (GB/T35381.6-2017) | | Description (Translated English) | Tractors and machinery for agricultural and forestry -- Serial control and communications data network -- Part 6: Virtual terminal | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B90 | | Classification of International Standard | 65.060.01 | | Word Count Estimation | 274,212 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 35381.6-2017: Tractors and machinery for agricultural and forestry -- Serial control and communications data network -- Part 6: Virtual terminal
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tractors and machinery for agricultural and forestry-Serial control and communications data network-Part 6. Virtual terminal
ICS 65.060.01
B90
National Standards of People's Republic of China
Agriculture and Forestry tractors and machinery serial control and
Communication Data Network Part 6. Virtual Terminals
communicationsdatanetwork-Part 6.Virtualterminal
(ISO 11783-6.2014, IDT)
Published on.2017-12-29
2018-07-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Foreword
GB/T 35381 "Serial Forestry and Tractor Control and Communication Data Network" is divided into the following 14 parts.
--- Part 1. General standards for data communications;
--- Part 2. The physical layer;
--- Part 3. Data Link Layer;
--- Part 4. Network layer;
--- Part 5. Network Management;
--- Part 6. Virtual Terminals;
--- Part 7. Tool message application layer;
--- Part 8. Powertrain messages;
--- Part 9. Tractor ECU;
--- Part 10. Data exchange between task controllers and management information systems;
--- Part 11. Data Meta Dictionary;
--- Part 12. Diagnostic services;
--- Part 13. File Servers;
--- Part 14. Sequence Control.
This part is part 6 of GB/T 35381.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the translation method equivalent to the use of ISO 11783-6.2014 "Agricultural forestry tractors and machinery serial control and communications data network
Part 6. Virtual Terminals."
The Chinese documents that are consistent with the normatively quoted international documents in this section are as follows.
--- GB/T 35381.1-2017 Agricultural and forestry tractors and machinery serial control and communications data network - Part 1. Data communication
General Standard (ISO 11783-1-2007, IDT)
---GB/T 35381.3-2017 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 3. Data Link
Layer (ISO 11783-3.2014, IDT)
--- GB/T 35381.5-2017 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 5. Network Management
(ISO 11783-5.2011, IDT)
--- GB/T 35381.7-2017 Agricultural and forestry tractors and machinery serial control and communications data network - Part 7. Tooling messages
Application layer (ISO 11783-7.2015, IDT)
This part is proposed by China Machinery Industry Federation.
This section is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201).
This section was drafted by. Henan University of Science and Technology, China Academy of Agricultural Mechanization, Shandong Academy of Agricultural Machinery, Luoyang West
Court Vehicle and Power Inspection Co., Ltd.
The main drafters of this section. Zhang Mingzhu, Gao Hongfeng, Yan Baofeng, Mao Wenhua, Lin Yuhan, Wang Dongyue, Ma Xiaojun, Yue Mingming.
Agriculture and Forestry tractors and machinery serial control and
Communication Data Network Part 6. Virtual Terminals
1 Scope
GB/T 35381 specifies a serial control and communication data network for tractors for agriculture and forestry, and suspension, semi-suspension, traction, or self-propelled implements.
Its purpose is to realize the placement of sensors, actuators, control elements and information storage and display units built or built into tractors or implements.
Standardization of data transmission methods and formats.
This part of GB/T 35381 describes general virtual terminals that can be used with tractors and implements.
Table L.2 was revised in ISO 11783-6 Second Edition (referring to the second edition of ISO 11783-6).
Two generations of VT and Working Sets are described in detail in ISO 11783-6 Second Edition. 3rd generation VT and work
Working Sets meet all the requirements of the first edition, appendix G of the second edition, special requirements for the third generation, and appendices J and L.2
Claim. The 4th generation VT and Working Sets meet all the requirements of the second edition.
The new requirements of this section (the third edition of ISO 11783-6) have been designated as the 5th generation VT.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 11783-1 Tractors and Machinery for Agriculture and Forestry Serial Control and Communication Data Network Part 1. General Data Communication Standards
(Tractorsandmachineryforagricultureandforestry-Serialcontrolandcommunicationsdatanet-
work-Part 1.Generalstandardformobiledatacommunication)
ISO 11783-3 Tractors and Machinery for Agriculture and Forestry Serial Control and Communication Data Network Part 3. Data Link Layers (Tractors)
andmachineryforagricultureandforestry-Serialcontrolandcommunicationsdatanetwork-Part 3.
Datalinklayer)
ISO 11783-5 Tractors and machinery for agriculture and forestry - Serial control and communication data network - Part 5. Network management (Tractorsand
machineryforagricultureandforestry-Serialcontrolandcommunicationsdatanetwork-Part 5.
Networkmanagement)
ISO 11783-7 Tractors and machinery for agriculture and forestry Serial control and communication data network Part 7. Implement message layer (Trac-
torsandmachineryforagricultureandforestry-Serialcontrolandcommunicationsdatanetwork-
Part 7.Implementmessagesapplicationlayer)
ISO 15077 tractors and self-propelled machinery for agricultural and forestry operators control mechanisms, displacements, operating positions and methods (Trac-
torsandself-propeledmachineryforagriculture-Operatorcontrols-Actuatingforces,displacement,loca-
Tionandmethodofoperation)
3 Terms and Definitions
The following terms and definitions as defined by ISO 11783-1 apply to this document.
|