|
US$1059.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35381.14-2020: (Agricultural and forestry tractors and machinery Serial control and communication data network - Part 14: Sequence control)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35381.14-2020 | English | 1059 |
Add to Cart
|
7 days [Need to translate]
|
(Agricultural and forestry tractors and machinery Serial control and communication data network - Part 14: Sequence control)
| Valid |
GB/T 35381.14-2020
|
PDF similar to GB/T 35381.14-2020
Basic data | Standard ID | GB/T 35381.14-2020 (GB/T35381.14-2020) | | Description (Translated English) | (Agricultural and forestry tractors and machinery Serial control and communication data network - Part 14: Sequence control) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B90 | | Word Count Estimation | 57,593 | | Date of Issue | 2020-11-19 | | Date of Implementation | 2021-03-01 | | Regulation (derived from) | National Standard Announcement No. 26 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 35381.14-2020: (Agricultural and forestry tractors and machinery Serial control and communication data network - Part 14: Sequence control)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Agricultural and forestry tractors and machinery Serial control and communication data network Part 14.Sequence control)
ICS 65.060.01; 35.240.99
B90
National Standards of People's Republic of China
Agriculture and forestry tractors and machinery
Serial control and communication data network
Part 14.Sequence Control
2020-11-19 released
2021-03-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Technical requirements 4
4.1 General 4
4.2 Sequence Control User Interface 4
4.3 Workgroup master device/member configuration 8
4.4 Sequence management function 8
4.5 Troubleshooting 26
4.6 Communication Strategy 28
Appendix A (Normative Appendix) Sequence Control Data Definition 29
Appendix B (Normative Appendix) Message Definition 36
Appendix C (Normative Appendix) Technical Data Message 37
Appendix D (Normative Appendix) SCD Operation Message 39
Appendix E (Normative Appendix) Sequence Control Message 45
Appendix F (Normative Appendix) Status Message 51
Reference 54
Foreword
GB/T 35381 "Agricultural and forestry tractors and machinery serial control and communication data network" is divided into the following 14 parts.
---Part 1.General Standards for Data Communication;
---Part 2.Physical layer;
---Part 3.Data Link Layer;
---Part 4.Network layer;
---Part 5.Network Management;
---Part 6.Virtual Terminal;
---Part 7.Tool message application layer;
---Part 8.Powertrain news;
---Part 9.Tractor ECU;
---Part 10.Data exchange between task controller and management information system;
---Part 11.Data Element Dictionary;
---Part 12.Diagnostic services;
---Part 13.File Server;
---Part 14.Sequence control.
This part is Part 14 of GB/T 35381.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
The translation method used in this part is equivalent to ISO 11783-14.2013 "Agricultural and forestry tractors and machinery serial control and communication data network
Part 14.Sequence Control.
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows.
---GB/T 35381.1-2017 Agricultural and forestry tractors and machinery serial control and communication data network Part 1.Data communication
Common standard (ISO 11783-1.2007, IDT)
---GB/T 35381.3-2017 Agricultural and forestry tractors and machinery serial control and communication data network Part 3.Data link
Layer (ISO 11783-3.2014, IDT)
---GB/T 35381.5-2017 Agricultural and forestry tractors and machinery serial control and communication data network Part 5.Network management
(ISO 11783-5.2011, IDT)
---GB/T 35381.6-2017 Agricultural and forestry tractors and machinery serial control and communication data network Part 6.Virtual terminal
(ISO 11783-6.2014, IDT)
This section has made the following editorial changes.
---Corrected the printing error of the original international standard. "39 in Figure 2 indicates that a reference to SCMOP has been established" "26 in Figure 2
Show that a reference to SCCOP has been established" "Figure 2 is the establishment of a graphical object in the SCCOP of the connected SCC" "Figure 2"
Change to "Figure 3" (see 4.2.1).
This part was proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201).
Drafting organizations of this section. Henan University of Science and Technology, Chinese Academy of Agricultural Mechanization Science, Xingkedi Technology (Taizhou) Co., Ltd., Shandong Zhong
Zhi Electronics Co., Ltd., Xingguang Agricultural Machinery Co., Ltd., Taishan Intelligent Manufacturing Industry Research Institute, China Rural Technology Development Center.
The main drafters of this section. Ji Baofeng, Gao Hongfeng, Yuan Yanwei, Zhang Junning, Hu Xiaolu, Wang Lili, Zhao Bo, Lu Guoguo, Zhou Liming, Wang Fengzhu,
Li Hongwei, Li Yang, Bai Yunfei, Suo Jingkun, Wu Chuantao, Zhang Shenqiang, Wei Fukui, Li Bo, Li Yashuo, Zhang Dongxu.
Agriculture and forestry tractors and machinery
Serial control and communication data network
Part 14.Sequence Control
1 Scope
GB/T 35381 specifies the serial control and communication data network of agricultural and forestry tractors and suspended, semi-suspended, traction or self-propelled machines.
Its purpose is to standardize data transmission methods and formats between sensors, drives, control components, information storage and display units. These devices
Installed on tractors or suspension implements or standard equipment on them.
This part of GB/T 35381 specifies a sequence control system that includes tractor and implement functions. For example. land management system. system
The system allows multiple function sequences activated by the operator to be recorded and replayed under the command of the operator. These features come from tractors or
Other control functions on the ISO 11783 network.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
ISO 11783-1 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 1.Data Communication General Standard
ISO 11783-3 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 3.Data Link Layer
ISO 11783-5 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 5.Network Management
ISO 11783-6 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 6.Virtual Terminal
3 Terms and definitions
The following terms and definitions defined by ISO 11783-1 and ISO 11783-3 apply to this document.
3.1
Abort
Pause sequence playback, and immediately stop all actions initiated during sequence execution.
Example. The suspension device stops at the current position.
3.2
Activity sequence control main control device
The sequence control main control device selected by the operator is used to control the sequence control system.
Note. Only one active sequence control master SCM is allowed at the same time.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35381.14-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 35381.14-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35381.14-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35381.14-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|