| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35381.10-2020 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
| Valid |
GB/T 35381.10-2020
|
PDF similar to GB/T 35381.10-2020
Basic data | Standard ID | GB/T 35381.10-2020 (GB/T35381.10-2020) | | Description (Translated English) | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B90 | | Classification of International Standard | 65.060.01; 35.240.99 | | Word Count Estimation | 194,193 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-04-01 | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 35381.10-2020: Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Agricultural and forestry tractors and machinery Serial control and communication data network Part 10: Data exchange between task controller and management information system)
ICS 65:060:01; 35:240:99
B90
National Standards of People's Republic of China
Agriculture and forestry tractors and machinery
Serial control and communication data network
Part 10: Task Controller and Management Information System
Data exchange
(ISO 11783-10:2015, MOD)
Released on 2020-12-14 Implemented on 2021-04-01
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Abbreviations 3
5 General 3
5:1 Task Management 3
5:2 Task management on FMIS computer 5
5:3 Pre-selection and allocation of equipment 5
5:4 Task Controller Interface Driver 5
5:5 Task Controller User Interface 5
5:6 Data logger function 5
6 Mission Controller Requirements 6
6:1 Task selection and execution 6
6:2 Time and location record 6
6:3 Parameter group record 7
6:4 Task Event Record 7
6:5 Choice of language, format and measurement unit 8
6:6 Connection Management 8
6:7 Task Controller Number 12
6:8 Data exchange on the network 13
7 Data Logger Requirements 23
7:1 Overview 23
7:2 Connection Management 24
7:3 Measurements and totals 24
8 Data transmission 25
8:1 Overview 25
8:2 Extensible Markup Language 25
8:3 Extensible Architecture Definition 25
8:4 XML Schema Definition 26
8:5 XML data transfer file 29
8:6 Binary data transfer file 31
8:7 Device Descriptor Object Pool 36
Appendix A (Normative Appendix) Device Descriptor Object 40
Appendix B (Normative Appendix) Message Definition 47
Appendix C (normative appendix) XML element relationship structure diagram 61
Appendix D (normative appendix) XML elements and attributes 64
Appendix E (Normative Appendix) Pre-defined GB/T 35381 Annex 140
Appendix F (Normative Appendix) Definition of TC Function and Device Descriptor Object Pool 148
Appendix G (Normative Appendix) Task-based time registration 187
References 189
Foreword
GB/T 35381 "Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network" is divided into the following 14 parts:
---Part 1: General Standards for Data Communication;
---Part 2: Physical layer;
---Part 3: Data Link Layer;
---Part 4: Network layer;
---Part 5: Network Management;
---Part 6: Virtual Terminal;
---Part 7: Tool message application layer;
---Part 8: Powertrain news;
---Part 9: Tractor ECU;
---Part 10: Data exchange between task controller and management information system;
---Part 11: Data Element Dictionary;
---Part 12: Diagnostic services;
---Part 13: File Server;
---Part 14: Sequence control:
This part is part 10 of GB/T 35381:
This section was drafted in accordance with the rules given in GB/T 1:1-2009:
This part uses the redrafting law to amend and adopt ISO 11783-10:2015 "Agricultural and forestry tractors and machinery serial control and communication data network
Network Part 10: Data Exchange between Task Controller and Management Information System:
The technical differences between this part and ISO 11783-10:2015 and the reasons are as follows:
---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments:
The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows:
● Replace ISO 11783-1 with GB/T 35381:1 which is equivalent to adopting international standards (see Chapter 3, Chapter 4, 5:3, 5:6 and
7:1);
● Replace ISO 11783-3 with GB/T 35381:3 which is equivalent to the international standard (see 6:6:3, 6:8:1, 8:7 and Appendix B);
● Replace ISO 11783-5 with GB/T 35381:5 equivalent to the international standard (see 6:6:2, 6:6:3, Appendix A and Appendix
D);
● Replace ISO 11783-6 with GB/T 35381:6 equivalent to the international standard (see 6:5, 8:6:2, 8:6:4, 8:7, Appendix A
And Appendix D);
● Replace ISO 11783-7 with GB/T 35381:7 equivalent to the international standard (see 6:5, 6:6:3, 6:6:5, Appendix A,
Record B, Appendix D and Appendix G);
● Replace ISO 11783-11 with GB/T 35381:11 equivalent to the international standard (see 6:8:1, 8:7, Appendix A, Appendix
B, Appendix D and Appendix F);
● Replace ISO 11783-12 with GB/T 35381:12, which is equivalent to the international standard (see Appendix A, Appendix D and Appendix F):
--- Modify WGS84 to CGS2000 to adapt to my country's technical conditions (see 8:6:4 and Appendix D):
---The Beidou Positioning System (BDS) has been added to adapt to my country's technical conditions (see 6:2, 8:6:3, 8:7, Appendix A and Appendix D):
This part was proposed by China Machinery Industry Federation:
This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201):
Drafting organizations of this section: Lovol Heavy Industries Co:, Ltd:, Chinese Academy of Agricultural Mechanization Sciences, Anhui Zhongke Intelligent Perception Industrial Technology
Technology Research Institute Co:, Ltd:, Fengjiang Intelligent Software Technology (Nanjing) Co:, Ltd:, Xingguang Agricultural Machinery Co:, Ltd:, Shandong Shifeng (Group)
Limited Liability Company, Henan University of Science and Technology, Shandong Zhongzhi Electronics Co:, Ltd:
The main drafters of this section: Li Jinliang, Yuan Yanwei, Zhang Junning, Li Zhengyu, Ji Baofeng, Gao Hongfeng, Zhang Wei, Wang Lili, Mao Wenhua, Zhao Bo,
Lu Chengwei, Li Yang, Wang Fengzhu, Wang Changwei, Sheng Shouzhao, Qian Juping, Lin Lianhua, Xu Haigang, Li Hongwei, Li Songhe:
Agriculture and forestry tractors and machinery
Serial control and communication data network
Part 10: Task Controller and Management Information System
Data exchange
1 Scope
GB/T 35381 specifies the serial control and communication data network of agricultural and forestry tractors and suspended, semi-suspended, traction or self-propelled machines:
Its purpose is to standardize data transmission methods and formats between sensors, drivers, control components, information storage and display units: These devices
Installed on tractors or implements or standard equipment on them:
This part of GB/T 35381 specifies the task controller application layer and defines the communication between the task controller and the electronic control unit
Requirements and business: This part also specifies the data format for communication with the farm management computer, control calculations, and messages sent to the control function:
息format:
This part is applicable to the data of task controller and management information system in the serial control and communication data network of agricultural and forestry tractors and machinery
exchange:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 35381:1 Agricultural and forestry tractors and machinery serial control and communication data network Part 1: Data communication general standard
(GB/T 35381:1-2017, ISO 11783-1:2007, IDT)
GB/T 35381:3 Agricultural and forestry tractors and machinery serial control and communication data network Part 3: Data link layer
(GB/T 35381:3-2017, ISO 11783-3:2014, IDT)
GB/T 35381:5 Agricultural and forestry tractors and machinery serial control and communication data network Part 5: Network management
(GB/T 35381:5-2017, ISO 11783-5:2011, IDT)
GB/T 35381:6 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 6: Virtual Terminal
(GB/T 35381:6-2017, ISO 11783-6:2014, IDT)
GB/T 35381:7 Agricultural and forestry tractors and machinery serial control and communication data network Part 7: Machine message application layer (GB /
T35381:7-2017, ISO 11783-7:2015, IDT)
GB/T 35381:11 Agricultural and forestry tractors and machinery serial control and communication data network Part 11: Data element dictionary
(GB/T 35381:11-2017, ISO 11783-11:2011, IDT)
GB/T 35381:12 Agricultural and Forestry Tractors and Machinery Serial Control and Communication Data Network Part 12: Diagnostic Service
(GB/T 35381:12-2020, ISO 11783-12:2019, IDT)
ISO 11898-1 Road Vehicle Controller Area Network (CAN) Part 1: Data Link Layer and Physical Signal (Roadvehi-
cles-Controlerareanetwork(CAN)-Part 1:Datalinklayerandphysicalsignaling)
ISO /IEC 10646 Information Technology Universal Coded Character Set (UCS) (Informationtechnology-UniversalCoded
CharacterSet(UCS))
3 Terms and definitions
The following terms and definitions defined in GB/T 35381:1 apply to this document:
|