|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34725-2017: Standard test method for performance of structural wood-based panel under concentrated static and impact loads
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34725-2017 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Standard test method for performance of structural wood-based panel under concentrated static and impact loads
| Valid |
GB/T 34725-2017
|
PDF similar to GB/T 34725-2017
Standard similar to GB/T 34725-2017 GB 55001 GB 55002 GB 50005 Basic data | Standard ID | GB/T 34725-2017 (GB/T34725-2017) | | Description (Translated English) | Standard test method for performance of structural wood-based panel under concentrated static and impact loads | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P23 | | Classification of International Standard | 79.060 | | Word Count Estimation | 10,189 | | Date of Issue | 2017-11-01 | | Date of Implementation | 2018-05-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 34725-2017: Standard test method for performance of structural wood-based panel under concentrated static and impact loads
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for performance of structural wood-based panel under concentrated static and impact loads
ICS 79.060
P23
National Standards of People's Republic of China
Structural plywood with concentrated load and
Impact load test method
Posted.2017-11-01
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This standard proposed by the State Forestry Administration.
This standard by the National Wood Standardization Technical Committee structure timber sub-technical committee (SAC/TC41/SC4) centralized.
This standard was drafted. Chinese Academy of Forestry Timber Industry Institute, Taizhou Eurasian Wood Co., Ltd., Hubei Baoyuan Wood
Limited, the International Bamboo and Rattan Center, Heilongjiang Institute of Timber Science and Technology, Taizhou City of Quality and Technical Supervision and Inspection Institute, Manchuria Lianzhong Wood limited
Responsible company.
The main drafters of this standard. Zhou Haibin, Lin Limin, Wang Ge, Yu Huaqiang, Wang Chunming, Xu Wentao, Jin Guoqing, Yuan Gongzhi, Lv Yi'an, Jin Sha,
Wang Xiuquan.
Structural plywood with concentrated load and
Impact load test method
1 Scope
This standard specifies the structural use of plywood concentrated load and impact load performance test terms and definitions, sample selection, specimen preparation, test
Parts handling, test equipment, specimen installation, test procedures, data logging and test reports.
This standard applies to the use of structural wood-based panels as a building applied to the floor panels and roof panels its concentration load and impact load performance
test.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 18259 Panels and decorative surface terminology
GB 50005 wood structure design specifications
3 Terms and definitions
GB/T 18259 and GB 50005 defined by the following terms and definitions apply to this document.
3.1
Support member framingmember
Located in the lower part of the floor or roof panel, supporting the upper load components.
3.2
Around supporting fuledgesupport
Floor or roof panels have support members on the lower four sides.
3.3
The edge does not fully support partialedgesupport
An opposite side of a floor or roof panel is placed on a support member and the other opposite side is unsupported but without a supporting edge Two floor or roof panels
Through the mouth, end clips or other similar way.
3.4
No support for edges withoutedgesupport
An opposite side of the floor or roof panel is placed on the support member and the other opposite side is unsupported.
3.5
Guarantee load proofload
A load value used in the load-bearing performance test is to ensure that the structural plywood meets the requirements of the relevant structural safety and is normal
Use the process to maintain structural integrity. The guaranteed load should be determined by both supply and demand based on the intended use, usually between the target use (or
Meter) between the load and the ultimate load.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34725-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34725-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34725-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34725-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|