|
US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34094-2017: Power consumption measurement methods of information technology equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34094-2017 | English | 119 |
Add to Cart
|
3 days [Need to translate]
|
Power consumption measurement methods of information technology equipment
| Valid |
GB/T 34094-2017
|
PDF similar to GB/T 34094-2017
Basic data | Standard ID | GB/T 34094-2017 (GB/T34094-2017) | | Description (Translated English) | Power consumption measurement methods of information technology equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L04 | | Classification of International Standard | 35.020 | | Word Count Estimation | 6,629 | | Date of Issue | 2017-07-31 | | Date of Implementation | 2017-11-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 34094-2017: Power consumption measurement methods of information technology equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Power consumption measurement methods of information technology equipment
ICS 35.020
L04
National Standards of People's Republic of China
Information technology equipment power measurement methods
(IEC 62018.2003, Powerconsumption of information technology
equipment-Measurementmethods, IDT)
2017-07-31 Posted
2017-11-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Test Procedure 1
5 records of measurement results 2
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method identical with IEC 62018.2003 "Information technology equipment power consumption - measurement methods."
The documents of our country that are consistent with the corresponding international documents that are normative references in this standard are as follows.
--- GB 4943.1-2011 Information technology equipment safety Part 1. General requirements (IEC 60950-1.2005, MOD)
This standard made the following editorial changes.
--- Modify the standard name.
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This standard by the People's Republic of China Ministry of Industry and Information Technology (E) centralized.
This standard was drafted. China Electronics Standardization Institute, the Fifth Institute of Industry and Information Technology, China Quality Certification Center, on
Shanghai Quality Supervision and Inspection Technology Research Institute, Shenzhen TCL New Technology Co., Ltd.
The main drafters of this standard. Li Zheng, Hu Yanfei, Jia Zhen, Yu Yimin, Ding Xifeng.
Introduction
Energy management is where information technology (IT) equipment reduces the energy consumption of external energy sources or reduces the total energy consumption of the equipment during the idle phases of any program, and is
Through the equipment design, structure, operation to achieve.
The purpose of energy management is to minimize the energy consumed by the device in performing the necessary functions.
The design, operation or structure of the energy management program should not impair the function of the equipment itself or the equipment.
The above shows the purpose of minimum energy consumption to accomplish a task. Energy management is sometimes expressed as two levels of power consumption in different modes of operation
The ratio.
When the completion of a particular function into idle state, the device receives a program instruction to enter the power saving mode. There may be a few different sections
In power-on mode, an energy saver mode may turn off the drive, and in another power saver mode, more power may be turned off for maximum power saving.
In some cases, the most energy efficient mode is shutdown, with little or no energy consumption. User or software operation will re-enter the device into high energy
Consumption level or reach full working mode without the need for external restart procedures interference.
If the device is mainly used for non-stop work, rarely enter the idle state, you do not need energy-saving mode.
Information technology equipment power measurement methods
1 Scope
This standard specifies the energy management method for the purpose of information technology equipment (ITE) in different modes of power measurement methods.
Information technology equipment includes products specified by IEC 60950-1.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
IEC 60950-1 Information Technology Equipment Security Part 1. General requirements (Informationtechnologyequipment-
Safety-Part 1.Generalrequirements)
3 Terms and definitions
IEC 60950-1 defines the following terms and definitions apply to this document.
3.1
Full working model ful-onmode
Information technology equipment in all functions fully activated under normal operating conditions.
3.2
Energy-saving mode energysavingmode
One or more of the information technology equipment functions are turned off by the working conditions.
4 test procedures
4.1 measuring equipment
The measurement uses a calibrated voltage meter and power meter that provide true rms values. Voltmeter at the rated voltage accuracy should be ± 1%
Within the power meter at 100W or higher power accuracy should be within ± 1%, the waveform accuracy of the peak reading of the reading factor of 5, the test equipment should
Have at least 1kHz bandwidth.
4.2 configuration
Equipment test should use a typical representative of the configuration and the ability to perform the configuration function.
4.3 temperature and humidity
If the manufacturer does not provide a working environment, or the specified temperature range includes 23 ℃, the test should be carried out at 23 ℃ ± 5 ℃. If the rules
The fixed temperature range does not include 23 ° C. This test will be conducted at any temperature range closer to 23 ° C.
4.4 Test power supply
4.4.1 Frequency and waveform
The frequency of the test power supply shall be the rated frequency of the equipment under test. Test equipment shall be tested when the equipment under test is operating in the maximum configuration declared by the manufacturer
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34094-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34094-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34094-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34094-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|