|
US$539.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33836-2017: Plane sealing gaskets for heat energy device
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33836-2017 | English | 539 |
Add to Cart
|
5 days [Need to translate]
|
Plane sealing gaskets for heat energy device
| Valid |
GB/T 33836-2017
|
PDF similar to GB/T 33836-2017
Basic data | Standard ID | GB/T 33836-2017 (GB/T33836-2017) | | Description (Translated English) | Plane sealing gaskets for heat energy device | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q69 | | Classification of International Standard | 27.020 | | Word Count Estimation | 27,230 | | Date of Issue | 2017-05-31 | | Date of Implementation | 2018-04-01 | | Quoted Standard | GB/T 191-2008; GB/T 528-2009; GB/T 531.1-2008; GB/T 1147.1-2007; GB/T 1147.2-2007; GB/T 1682-2014; GB/T 1690-2010; GB/T 1720-1979; GB/T 3512-2014; GB/T 4340.1-2009; GB/T 6072.1-2008; GB/T 6739-2006; GB/T 7759.1-2015; GB/T 9286-1998; GB/T 12678-1990; GB/T | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the terms and definitions of the gasket (hereinafter referred to as "gasket") for thermal energy devices, the structure, requirements, test methods, inspection rules, marking, packaging, transportation and storage of gaskets. This standard applies to thermal energy devices in the internal combustion engine (such as mobile cars and stationary generators, etc.) and other thermal devices connected to the Department and the relevant pipeline, the interface of the gasket. | GB/T 33836-2017: Plane sealing gaskets for heat energy device---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plane sealing gaskets for heat energy device
ICS 27.020
Q69
National Standards of People's Republic of China
A flat gasket for thermal energy installations
2017-05-31 released
2018-04-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Directory
Preface III
1 Scope 1
2 normative reference document 1
3 Terms and definitions 2
4 structure of gasket 6
5 requires 10
6 Test methods 13
7 Inspection rules 15
Marking, Packaging, Transportation and Storage 15
Appendix A (normative) Performance test method for gaskets 17
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the China Building Materials Federation.
This standard is the national non-metallic mineral products and products Standardization Technical Committee (SAC/TC406) centralized.
The drafting unit. Hangzhou internal combustion engine cylinder pad Co., Ltd., Jiangsu Saier Sealing Technology Co., Ltd., Nanyang Tianyi sealed limited
Company, Hebei Hengda Sealing Material Co., Ltd., Xi'an days shield cylinder bed limited liability company, Xianyang non-metallic mineral research and design institute Co., Ltd.,
Ningbo Xin Xinglong Sealing Products Co., Ltd., Anhui Quan Chai Power Co., Ltd., Wuxi Xin Di Diesel Engine Parts Co., Ltd.,
Metal mine products quality supervision and inspection center, Ningbo Harmony Rubber Co., Ltd., Yantai Ishikawa Sealing Technology Co., Ltd.
The main drafters of this standard. Liu Zhenjia, Miao Wentong, Ni Huanjun, Chen Yuxiang, Fan Jingfang, Liang Fang, Lei Jianbin, Hou Libing, Wang Shuifang,
Pan Zhongde, Zhao Jianhua, Hou Caihong, Yan Dongliang, Zhou Min.
A flat gasket for thermal energy installations
1 Scope
This standard specifies the terms and definitions of the flat gasket (hereinafter referred to as "gasket") for thermal energy devices, and the structure of the gasket
Requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to thermal devices such as internal combustion engines (such as mobile cars and stationary generators, etc.) and other thermal devices connected to the Department and phase
Off the pipe, the sealing gasket at the interface.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Specification for packaging and storage charts
Rubber, vulcanized or thermoplastic elastomers - Determination of tensile stress - strain properties GB/T
GB/T 531.1-2008 Vulcanized rubber or thermoplastic rubber - Test method for hardness - Part 1. Shore 's hardness method (Shao
Hardness)
Small and medium - power internal combustion engines - Part 1. General technical conditions GB/T 1147.1-2007
Small and medium - power internal combustion engines - Part 2. Test methods GB/T
GB/T 1682-2014 vulcanized rubber - Determination of low - temperature brittleness - Single - sample method
Vulcanized rubber or thermoplastic rubber - Test method for resistance to liquids GB/T 1690-2010
Determination of adhesion of paint film GB/T 1720-1979
GB/T 3512-2014 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat resistance test
Metallic materials - Vickers hardness test - Part 1. Test methods GB/T 4340.1-2009
GB/T 6072.1-2008 Reciprocating internal combustion engine performance - Part 1. Calibration and testing of power, fuel consumption and oil consumption
Method Additional requirements for general purpose engines
Paints and varnishes - Determination of film hardness by pencil method GB/T 6739-2006
GB/T 7759.1-2015 Determination of compression set of vulcanized rubber or thermoplastic rubber - Part 1. Determination of compressive permanent deformation at room temperature and high temperature
Under conditions
Paints and varnishes - Tests for paint film GB/T 9286-1998
Test method for reliability test of automobiles GB/T 12678-1990
Paints and varnishes - Determination of film thickness GB/T 13452.2-2008
Hand - held torque wrenches - General technical requirements GB/T 15729-2008
Test method for reliability of automobile engines GB/T 19055-2003
GB/T 20671.1-2006 Classification and test methods for nonmetallic gasket materials - Part 1. Classification of nonmetallic gasket materials
system
GB/T 20671.4-2006 Classification and test methods for nonmetallic gasket materials - Part 4. Test method for gasket sealing
JB/T 5135.3-2013 General purpose small gasoline engine - Part 3. Reliability, durability test and evaluation method
JB/T 7293.5-2015 Internal combustion engine bolts and nuts - Part 5. Cylinder head bolts technical conditions
JB/T 7293.7-2015 Internal combustion engine bolts and nuts - Part 7. Cylinder head nuts and flywheel nuts - Technical conditions
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33836-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 33836-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33836-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33836-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|