|
US$109.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33518-2017: Remanufacturing -- Based on spectral analysis to detect assessment specification shaft parts
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33518-2017 | English | 109 |
Add to Cart
|
3 days [Need to translate]
|
Remanufacturing -- Based on spectral analysis to detect assessment specification shaft parts
| Valid |
GB/T 33518-2017
|
PDF similar to GB/T 33518-2017
Basic data | Standard ID | GB/T 33518-2017 (GB/T33518-2017) | | Description (Translated English) | Remanufacturing -- Based on spectral analysis to detect assessment specification shaft parts | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J19 | | Classification of International Standard | 21.120.20 | | Word Count Estimation | 5,512 | | Date of Issue | 2017-02-28 | | Date of Implementation | 2017-06-01 | | Regulation (derived from) | National Standard Announcement No. 4 of 2017 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the detection requirements, power spectrum analysis and evaluation specifications of remanufactured shaft parts (hereinafter referred to as "parts"). This standard applies to couplings, expansion joints and other shaft parts. | GB/T 33518-2017: Remanufacturing -- Based on spectral analysis to detect assessment specification shaft parts
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Remanufacturing - Based on spectral analysis to monitor diagnostic specification shaft parts
ICS 21.120.20
J19
National Standards of People's Republic of China
Re - manufacturing based on spectral analysis of the shafting
Standard for component inspection and evaluation
2017-02-28 released
2017-06-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the National Standard Committee on Machine Shaft and Accessories (SAC/TC109).
The drafting unit of this standard. Taiyuan Heavy Industry Co., Ltd., in the machine productivity promotion center, Shanxi Daxin Transmission Technology Co., Ltd., Anhui
Taier Heavy Industry Co., Ltd., Kunshan Rongxing Power Transmission Co., Ltd.
The main drafters of this standard. Wang Xiaoling, Ming Cuixin, Zhang Xinhui, Xia Qinghua, Zhu Fei, Zhu Yue.
Re - manufacturing based on spectral analysis of the shafting
Standard for component inspection and evaluation
1 Scope
This standard specifies the detection requirements, power spectrum analysis and evaluation specifications of remanufactured shaft parts (hereinafter referred to as "parts").
This standard applies to couplings, expansion joints and other shaft parts.
2 detection requirements
2.1 Material testing
2.1.1 mechanical properties of metal parts, heat treatment requirements, surface stress testing, fatigue life testing, physical and chemical testing, non-destructive testing and welding
Seam level and other items of the test should be the appropriate standard or manufacturing requirements of the drawings to detect the degree of non-compliance.
2.1.2 non-metallic materials, parts of the performance and defects should be detected according to the appropriate standards or manufacturing requirements, to detect its aging or
Damage level.
2.2 processing inspection
2.2.1 The major dimensions of the finished parts, the deviation of the geometric tolerances and the roughness values shall be measured in accordance with the requirements of the corresponding standards or manufacturing drawings.
Line, to detect its wear and deformation.
2.2.2 The performance of the purchased parts and the quality of the test should be carried out according to the requirements of the corresponding standards to detect the degree of its function.
2.3 assembly parts detection
2.3.1 The installation dimensions, dimensions and clearance of the assembly parts shall be tested in accordance with the requirements of the manufacturing assembly drawing,
And the degree of compliance with the deviation.
2.3.2 Assembling parts Radial, axial and angular compensation quantities shall be tested in accordance with the requirements of the corresponding standards or manufacturing assembly drawings,
Integrated wear and deformation.
2.3.3 Assembly parts Torque, speed and dynamic balance level of the test should be the appropriate standard or manufacturing assembly requirements of the requirements, to test its bearing
Performance and balance of the degree of compliance.
2.4 parts status
2.4.1 The test object is divided into qualified parts and damaged parts, as well as remanufactured parts. Qualified parts are in accordance with 2.1 ~
2.3 of the provisions of the test, in full compliance with the corresponding standards or manufacturing requirements of the drawings; damaged parts are simulated in the actual use of the failure
State, some of its test items do not meet the conditions specified in 2.1 to 2.3; remanufacturing parts are based on the failure of the repair, its satisfaction
Original function and use, even in the performance of the upgrade.
2.4.2 Damaged parts need to be marked on the destruction of the one by one, and record the damage; remanufacturing parts need to repair
Line one by one, and for repair records.
2.5 power spectrum detection
2.5.1 qualified parts, damaged parts and remanufactured parts are required to be tested on the test bench, the determination of various parts of the work
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33518-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 33518-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33518-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33518-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|