|
US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32807-2016: Pneumatic valve business documents should contain information
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32807-2016 | English | 179 |
Add to Cart
|
3 days [Need to translate]
|
Pneumatic valve business documents should contain information
| Valid |
GB/T 32807-2016
|
PDF similar to GB/T 32807-2016
Basic data | Standard ID | GB/T 32807-2016 (GB/T32807-2016) | | Description (Translated English) | Pneumatic valve business documents should contain information | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Word Count Estimation | 9,981 | | Date of Issue | 2016-08-29 | | Date of Implementation | 2017-03-01 | | Regulation (derived from) | National Standard Announcement 2016 No.14 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 32807-2016: Pneumatic valve business documents should contain information---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Pneumatic valve business documents should contain information)
ICS 23.100.50
J20
National Standards of People's Republic of China
Pneumatic valve business documents should contain information
(ISO 17082..2004, Pneumaticfluidpower-Valves-Datatobe
includedinsupplierliterature, IDT)
2016-08-29 released
2017-03-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method equivalent to ISO 17082..2004 "pressure transmission valve business documents should be included in the information."
And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows.
Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1. for general use and numbers
According to the processed graphic symbols (ISO 1219-1..2006, IDT)
GB/T 3141-1994 Industrial fluid lubricants ISO viscosity classification (eqvISO 3448..1992)
--- GB 4208-2008 enclosure protection class (IP code) (IEC 60529..2001, IDT)
GB/T 7940.1-2008 Pneumatic five-port directional control valves - Part 1. Mounting surfaces without electrical connections
(ISO 5599-1..2001, IDT)
GB/T 7940.2-2008 Pneumatic five-port directional control valves - Part 2. Mounting surfaces with optional electrical connections
(ISO 5599-2..2001, IDT)
GB/T 17446-2012 Fluid Drive Systems and Components Glossary (ISO 5598..2008, IDT)
Measurement of switching time for pneumatic directional control valves (ISO 12238..2001, IDT) GB/T 22107-2008
--- GB/T 26142.1-2010 Pneumatic five-way directional control valve specifications 18mm and 26mm Part 1. no electrical
Connector mounting surface (ISO 15407-1..2000, IDT)
--- GB/T 26142.2-2010 Pneumatic five-way directional control valve specifications 18mm and 26mm Part 2. with optional power
Installation of gas fittings (ISO 15407-2..2003, IDT)
This standard has made the following editorial changes.
--- change the standard name to "Pneumatic valve business documents should contain information";
- Replace "UL429" with "JB/T 6378-2008" as listed in the "Example" column of the International Standard Table 1 "Certificate"
"CSA22.2-139" changed to "JB/T 10606-2006";
--- The C value in the "Example" column of the "rated flow" in Table 1 is corrected to "C = 0.056dm3/(s kPa) [5.6dm3/(s ·
bar)];
In the "reference" to increase the JB/T 6378-2008 and JB/T 10606-2006 two industry standards.
This standard is proposed by the China Machinery Industry Federation.
This standard by the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3) centralized.
This standard is responsible for drafting units. Ningbo Sonuo Industrial Automation Equipment Co., Ltd.
This standard participates in the drafting unit. National Pneumatic Product Quality Supervision and Inspection Center, Fenghua Xingyu Electronics Co., Ltd., Ningbo Yade
Chemical Industry Co., Ltd., Ningbo LEADER pneumatic sets Limited.
The main drafters of this standard. Mao Xinqiang, unit silver, Lu Bo, Mao Qianhui, Cao Jianbo, Fang Qinghua, Chen early Yang, Xia Jiayong.
Introduction
In a pneumatic system, the power is transmitted and controlled by closing the compressed air in the circuit.
Pneumatic valves are an important part of pneumatic control systems. Pneumatic valve control circuit in the direction of flow of compressed air, pressure and flow
Etc., so that the pneumatic actuator to obtain the necessary force, speed and change the direction of movement.
Pneumatic valve business documents should contain information
1 Scope
This standard specifies the manufacturer's information that should be included in the business documents accompanying the various pneumatic valves.
This information is essential for the selection of suitable pneumatic valves.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
ISO 1219-1 fluid drive systems and components - Graphical symbols and circuit diagrams - Part 1. Graphical symbols (Fluidpower
systemsandcomponents-Graphicsymbolsandcircuitdiagrams-Part 1. Graphicsymbols)
ISO 3448 Industrial lubricants ISO viscosity classification (Industrialliquidlubricants-ISO viscosityclassification)
ISO 4400 fluid drive systems and components 3-pin electrical plug with grounding contacts Features and requirements (Fluidpowersystems
andcomponents-Three-pinelectricalplugconnectorswithearthcontact-Characteristicsandrequire-
ments
ISO 5598 fluid drive system and component vocabulary (Fluidpowersystemsandcomponents-Vocabulary)
ISO 5599-1 Pneumatic five-port directional control valves - Part 1. Mounting surfaces without electrical connections (Pneumaticfluidpow-
er-Five-Portdirectionalcontrolvalves-Part 1. Mountinginterfacesurfaceswithoutelectricalcon-
nector
ISO 5599-2 Pneumatic five-port directional control valves - Part 2. Mounting surfaces with optional electrical connectors (Pneumaticfluid
power-Five-Portdirectionalcontrolvalves-Part 2. Mountinginterfacesurfaceswithoptionalelectri-
calconnector
ISO 6358 Determination of flow characteristics using compressible fluid elements (Pneumaticfluidpower-Componentsusing
compressiblefluids-Determinationofflow-rate characteristics
ISO 6952 fluid drive systems and components Two-pin electrical plug with ground contact characteristics and requirements (Fluidpowersystems
andcomponents-Two-pinelectricalplugconnectorswithearthcontact-Characteristicsandrequire-
ments
ISO 11727 Pneumatic control valves and other components Air and control mechanisms (Pneumaticfluidpower-Identifica-
tionofportsandcontrolmechanismsofcontrolvalvesandothercomponents)
ISO 12238 Pneumatic direction control valve switching time measurement (Pneumaticfluidpower-Directionalcontrol
valves-Measurementofshiftingtime)
ISO 15217 Fluid drive systems and components 16mm square electrical plug with grounding contacts Features and requirements (Fluidpower
systemsandcomponents-16mmsquareelectricalconnectorwithearthcontact -rationsand
requirements
ISO 15218 Pneumaticfluidpower-3/2 Solenoid Valves -
Mountinginterfacesurfaces
ISO 15407-1 Pneumatic specifications 18 mm and 26 mm five-way directional control valves - Part 1. Installation without electrical connection
(Pneumaticfluidpower-Five-Portdirectionalcontrolvalves, sizes18mmand26mm-Part 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32807-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 32807-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32807-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32807-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|