|
US$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32801-2016: Earth-moving machinery -- Remanufactured components -- Technical specifications of assembly
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32801-2016 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Earth-moving machinery -- Remanufactured components -- Technical specifications of assembly
| Valid |
GB/T 32801-2016
|
PDF similar to GB/T 32801-2016
Basic data | Standard ID | GB/T 32801-2016 (GB/T32801-2016) | | Description (Translated English) | Earth-moving machinery -- Remanufactured components -- Technical specifications of assembly | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Classification of International Standard | 53.100 | | Word Count Estimation | 7,775 | | Date of Issue | 2016-08-29 | | Date of Implementation | 2017-03-01 | | Regulation (derived from) | National Standard Announcement 2016 No.14 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 32801-2016: Earth-moving machinery -- Remanufactured components -- Technical specifications of assembly
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery - Remanufactured components - Technical specifications of assembly
ICS 53.100
P97
National Standards of People's Republic of China
Earthmoving machinery remanufacturing parts
Assembly technical specification
2016-08-29 released
2017-03-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Technical Committee for Standardization of Earthmoving Machinery (SAC/TC334).
This standard is responsible for drafting units. Tianjin Engineering Machinery Research Institute, Xiamen Xiamen Engineering Machinery Co., Ltd., Xugong Group Construction Machinery shares
Co., Ltd., Henan Hongyuan Wheel Co., Ltd., Hangzhou Zongxing Gear Co., Ltd., Zoomlion Co., Ltd., Xiamen City
Cheng Machinery Co., Ltd.
This standard participates in the drafting unit. Hebei Xuanhua Construction Machinery Co., Ltd., Ningbo Guangtian Saikesi Hydraulic Co., Ltd., Shaanxi Tongli
Heavy industry co., Ltd.
The main drafters of this standard. Li Guangqing, Li Weiping, Ma Guangrong, Chen Hanjie, Han Yili, Liu Taiping, Chen Yuanshan, Yu Jie, Yao Guangshan, Chen Jianbo,
Bai Feiping, Yang Xichuan.
Earthmoving machinery remanufacturing parts
Assembly technical specification
1 Scope
This standard specifies the terminology and definitions and requirements of earthmoving machinery remanufacturing parts.
This standard applies to the assembly of earthmoving machinery remanufacturing parts (hereinafter referred to as "parts").
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 28619 Termination Terminology
General technical requirements for JB/T 5945 engineering machinery assembly
3 terms and definitions
GB/T 28619 Definitions and the following terms and definitions apply to this document.
3.1
Remanufacturing parts assembly assemblymremanufacturedcomponents
The process of reassembling the finished parts and parts of the refurbished parts into the remanufactured product.
4 specification requirements
4.1 pre-assembly requirements
4.1.1 The assembly environment of the parts should be clean and conform to the environmental requirements of the prototype new product.
4.1.2 Parts shall be inspected before assembly.
4.1.3 parts should be cleaned before assembly, and according to the provisions of the new prototype.
4.2 Requirements for assembly process
4.2.1 Parts shall be assembled in accordance with the requirements of the new prototype and shall comply with the requirements of JB/T 5945.
4.2.2 parts in the assembly process should avoid bumps, scratches.
4.2.3 The assembly should have an assembly log file during assembly.
4.2.4 relative to the movement of parts, the assembly side of the contact surface should be added appropriate amount of lubricating oil (grease).
4.2.5 For parts with tolerance requirements, the assembly can be carried out by means of interchange, matching, repair and adjustment.
4.2.6 Key fastening connections and parts of the original technical document that should be used with new parts should not be used for recycling disassembled parts or remanufactured parts.
4.2.7 Parts contain calibration data, the assembly should be updated to the latest calibration data.
4.2.8 assembly process parameters should meet the requirements of the prototype new assembly.
4.2.9 parts of the assembly accuracy should not be less than the prototype of the new assembly accuracy.
|