|
US$624.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32800.6-2023: Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32800.6-2023 | English | 624 |
Add to Cart
|
5 days [Need to translate]
|
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
| Valid |
GB/T 32800.6-2023
|
PDF similar to GB/T 32800.6-2023
Basic data | Standard ID | GB/T 32800.6-2023 (GB/T32800.6-2023) | | Description (Translated English) | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J48 | | Classification of International Standard | 25.140.10 | | Word Count Estimation | 34,354 | | Date of Issue | 2023-11-27 | | Date of Implementation | 2024-06-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 32800.6-2023: Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 25:140:10
CCSJ48
National Standards of People's Republic of China
Safety requirements for handheld non-electric power tools
Part 6: Power tools for assembly of threaded fasteners
Hand-heldnon-electricpowertools-Safetyrequirements-
(ISO 11148-6:2012,IDT)
Published on 2023-11-27
2024-06-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
3:1 General terms and definitions 2
3:2 Specific terms and definitions for assembly power tools for threaded fasteners 4
4 Safety requirements and/or protective measures 5
4:1 General 5
4:2 Machinery safety 5
4:3 Thermal safety 5
4:4 Noise reduction 6
4:5 Vibration 6
4:6 Materials and substances processed, discarded or discharged 6
4:7 Ergonomics 7
4:8 Control device 8
5 inspection 9
5:1 General test conditions 9
5:2 Noise 9
5:3 Vibration 9
5:4 Unexpected start 9
5:5 Power tool structure 9
5:6 Inspection items for safety requirements 9
6 Usage information10
6:1 Logo, signs and warnings10
6:2 User Manual 11
6:3 Operating Instructions 15
6:4 Performance Parameters 15
6:5 Care instructions 16
Appendix A (Informative) List of Noteworthy Hazards 17
Appendix B (informative) Examples of assembly power tools for threaded fasteners covered by this document 19
Appendix C (normative) Symbols for signs and signs 21
C:1 Symbols for signage and marking regulations 21
C:2 Symbols for reference on signs and signs 22
Appendix D (normative) Additional safety requirements for internal combustion power tools23
D:1 Overview 23
D:2 Hazard List 23
D:3 Safety requirements and measures23
D:4 Usage information 24
Reference 26
Figure 1 Reaction rod 7
Figure 2 Auxiliary handle 8
Figure 3 Cantilever 8
Figure 4 Reasonable arrangement of the control device located on the upper part of the handle 8
Figure B:1 Fastener installation tool (straight handle type) 19
Figure B:2 Screwdriver (straight handle) 19
Figure B:3 Nut wrench (angle type) 19
Figure B:4 Ratchet wrench 19
Figure B:5 Open-end wrench 19
Figure B:6 Fastener installation tool (gun handle type) 19
Figure B:7 Screwdriver (gun handle type) 19
Figure B:8 Nut wrench (gun handle type) 20
Figure B:9 Impact or hydraulic pulse gas trigger (gun handle type) 20
Table 1 Inspection items 10
Table A:1 List of hazards worth noting17
Table C:1 Symbols for signage and marking regulations 21
Table C:2 Symbols for reference on signs and signs 22
Table D:1 Hazard list of tools powered by internal combustion engines23
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document is Part 6 of GB/T 32800 "Safety Requirements for Handheld Non-Electric Power Tools": GB/T 32800 has been released
The following sections are included:
---Part 1: Assembly power tools for non-threaded structural fasteners;
---Part 2: Cutting off and withholding power tools;
---Part 3: Drilling and tapping machines;
---Part 4: Pure impact power tools;
---Part 5: Rotary impact drilling tools;
---Part 6: Assembly power tools for threaded fasteners;
---Part 8: Grinding and polishing machines;
---Part 9: Grinding machines for molds;
---Part 10: Extrusion power tools;
---Part 11: Punching and shearing machines and scissors:
This document is equivalent to ISO 11148-6:2012 "Safety requirements for hand-held non-electric power tools Part 6: Threaded fasteners"
Assembling Power Tools":
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Rock Drilling Machinery and Pneumatic Tools Standardization Technical Committee (SAC/TC173):
This document was drafted by: Tianshui Rock Drilling Machinery Pneumatic Tools Research Institute, Quzhou Metrology and Quality Inspection Research Institute, Zhejiang Rongpeng Pneumatic Tools
Co:, Ltd:, Changsha Mining and Metallurgy Research Institute Co:, Ltd:, and Guangdong New Bix Industrial Co:, Ltd:
The main drafters of this document: Wang Jianzu, Xu Xiaojie, Yang Fazheng, Chen Shiping, Zeng Yihua, Xu Zhongchen:
Introduction
In order to standardize the safety requirements for handheld non-electric power tools to protect the personal health of operators and the safety of equipment and the environment, international standards
The chemical organization has released ISO 11148, a total of 13 parts of documents: Our country plans to adopt the 13 partial documents of ISO 11148 on an equal basis and formulate them as
The corresponding documents of each part of GB/T 32800: GB/T 32800 is planned to be composed as follows:
---Part 1: Assembly power tools for non-threaded structural fasteners: Covers riveting machines, riveting or plug tools, broken rod locking bolts
Tools, mandrel riveting tools, rivet nut holders:
---Part 2: Cutting off and withholding power tools: Covers non-yoke crimpers, cutters, cutting tools, cutting pliers, and crimping pliers:
---Part 3: Drilling and tapping machines: Covers drills, double-handle heavy-duty drills, and tapping machines:
---Part 4: Pure impact power tools: Covers crushers, chisels, shovels, engraving pens, rust removal hammers, picks, portable pile drivers,
Printing machine, tamping machine, stone hammer, shovel, tamping machine:
---Part 5: Rotary impact drilling tools: Covers small blasthole drills, rock drills, and rotary hammers:
---Part 6: Power tools for assembly of threaded fasteners: Covers hydraulic pulse gas triggers, impact wrenches, fastener installation tools,
Nut wrenches, open-end wrenches, ratchets, screwdrivers:
---Part 7: Grinder: Covers grinding grinders, cutting grinders, polishers and grinders using bowl and leaf wheels:
---Part 8: Grinding and polishing machines: Covers belt polishers, skateboard polishers, polishing machines, compound polishers, and rotary polishers:
Optical machine, linear polishing machine:
---Part 9: Grinding machines for molds: Covers grinders for angle molds, reciprocating files, rotary files, and sand for linear molds
Turbine:
---Part 10: Extrusion power tools: Covers crimping tools, ring parts separators, metal forming tools, nut splitters,
Extruders, printers, extrusion riveters, cutting tools with parallel blades, jaw extrusion pliers:
---Part 11: Punching and shearing machines and scissors: Covers punching and shearing machines and scissors:
---Part 12: Disc, pendulum and reciprocating saws: Covers disc saws, circular cutters, saw blades with a radius of less than 50mm, or
Oscillating saws with diamond cutting blades with a radius of less than 100 mm, oscillating cutters, and reciprocating saws including fine saws and hack saws:
---Part 13: Fastener driving tools:
Safety requirements for handheld non-electric power tools
Part 6: Power tools for assembly of threaded fasteners
1 Scope
This document specifies hand-held non-electric power tools used for tightening or installing threaded fasteners (hereinafter referred to as "assembly tools for threaded fasteners"):
Safety requirements for "Power Tools"): Power tools for assembling threaded fasteners can be driven by compressed air, hydraulic oil or internal combustion engines: When using or
For use by one operator with the support of one or both hands without the use of suspension devices (such as balancing devices):
This document applies to the following products:
---Hydraulic pulse gas trigger;
---Impact wrench;
---Fastener installation tools;
---Nut wrench;
---Open-end wrench (open-claw socket or pipe nut wrench);
---Ratchet wrench;
---screwdriver:
Note 1: See Appendix B for examples of power tools used to assemble threaded fasteners:
This document does not apply to special requirements and modifications of threaded fasteners for the purpose of mounting them on clamping devices with assembly power tools:
This document covers power tools used to assemble threaded fasteners other than those used in potentially explosive atmospheres:
All noteworthy hazards, dangerous situations or hazardous events when using the tool under foreseeable misuse conditions:
Note 2: EN13463-1 gives requirements for the use of non-electrical equipment in potentially explosive environments:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 15706-2012 General principles for mechanical safety design risk assessment and risk reduction (ISO 12100:2010, IDT)
ISO 3857-3 Glossary of compressors, pneumatic tools and machinery Part 3: Pneumatic tools and machinery (Compressors,
Note: GB/T 6247:4-2013 Rock drilling machinery and portable power tools terminology Part 4: Performance test (ISO 3857-3:1989, MOD)
Note: GB/T 6247:1-2013 Rock drilling machinery and portable power tools terminology Part 1: Rock drilling machinery, pneumatic tools and pneumatic machinery
(ISO 5391:2003,MOD)
anddieselfuel)
ISO 13732-1 Ergonomics of thermal environments Methods for evaluation of human response to contact surfaces Part 1: Thermal surfaces (Ergo-
surfaces-Part 1:Hotsurfaces)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32800.6-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 32800.6-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32800.6-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32800.6-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|