|
US$404.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32800.11-2023: Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32800.11-2023 | English | 404 |
Add to Cart
|
4 days [Need to translate]
|
Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
| Valid |
GB/T 32800.11-2023
|
PDF similar to GB/T 32800.11-2023
Basic data | Standard ID | GB/T 32800.11-2023 (GB/T32800.11-2023) | | Description (Translated English) | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J48 | | Classification of International Standard | 25.140.10 | | Word Count Estimation | 22,276 | | Date of Issue | 2023-03-17 | | Date of Implementation | 2023-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 32800.11-2023: Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS25:140:10
CCSJ48
National Standards of People's Republic of China
GB/T 32800:11-2023/ISO 11148-11:2011
Safety requirements for hand-held non-electric power tools
Part 11: Punching machines and scissors
Hand-held non-electric power tools-Safety requirements-
(ISO 11148-11:2011, IDT)
Released on 2023-03-17
2023-10-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
3:1 General terms and definitions 2
3:2 Terms and definitions for punching and shearing machines and scissors 3
4 Safety requirements and/or protective measures 3
4:1 General 3
4:2 Safety of machinery 4
4:3 Thermal safety 4
4:4 Noise Reduction 4
4:5 Vibration 5
4:6 Materials and substances that are disposed of, discarded or discharged5
4:7 Ergonomics and handle design 5
4:8 Control device 6
5 inspection 6
5:1 General test conditions 6
5:2 Noise 6
5:3 Vibration 6
5:4 Unexpected start 6
5:5 Power tool structure 7
5:6 Inspection items for safety requirements 7
6 Usage Information 7
6:1 Signs, signs and warnings 7
6:2 User Manual 8
6:3 Operating Instructions 11
6:4 Performance parameters 12
6:5 Care Instructions 12
APPENDIX A (INFORMATIVE) LIST OF HAZARDS TO NOTE 14
Appendix B (informative) Examples of punching and shearing machines and scissors covered by this document15
Appendix C (Normative) Symbols for Signs and Signs 16
Reference 17
Figure B:1 punching and shearing machine 15
Figure B:2 punching and shearing machine cutting along the ring line 15
Figure B:3 Scissors 15
Table 1 Inspection Item 7
Table A:1 Noteworthy hazard list 14
Table C:1 Symbols for signs and signs 16
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document is part 11 of GB/T 32800 "Safety Requirements for Handheld Non-electric Power Tools": GB/T 32800 has been released
the following sections:
--- Part 1: Assembly power tools for non-threaded structural fasteners;
--- Part 2: Cutting off and crimping power tools;
--- Part 3: Drilling and tapping machines;
--- Part 4: Pure impact power tools;
--- Part 10: Squeeze power tools;
--- Part 11: Punching and shearing machines and scissors:
This document is equivalent to ISO 11148-11:2011 "Safety requirements for hand-held non-electric power tools - Part 11: Punching and shearing machines and
Scissors":
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Standardization Technical Committee for Rock Drilling Machinery and Pneumatic Tools (SAC/TC173):
This document is drafted by: Zhejiang Rongpeng Pneumatic Tools Co:, Ltd:, Zhongjie Jieding Industrial Co:, Ltd:, Tianshui Rock Drilling Machinery Pneumatic Engineer
tool research institute:
The main drafters of this document: Li Xiaorong, Su Guangxi, Li Weijie, Li Xiaopeng, Su Zheyi, Yang Fazheng:
Introduction
In order to standardize the safety requirements of hand-held non-electric power tools, in order to protect the health of operators and the safety of equipment and the environment, the international standard
The International Organization has released ISO 11148, a total of 13 documents: Our country intends to adopt 13 partial documents of ISO 11148, which are formulated as
The corresponding parts of GB/T 32800 documents: GB/T 32800 is proposed to be constituted as follows:
--- Part 1: Assembly power tools for non-threaded structural fasteners: Covers riveting machines, riveting or plugging tools, broken bar lock bolts
Tools, mandrel riveting tools, rivet nut holders:
--- Part 2: Cutting off and crimping power tools: Covers non-yoke crimpers, cutters, cut-off tools, cutting pliers, crimping pliers:
--- Part 3: Drilling and tapping machines: Covers drills, double handle heavy drills, tapping machines:
--- Part 4: Pure impact power tools: Covers breakers, chisels, shovels, engraving pens, descaling hammers, picks, portable pile drivers, driver
Presses, compactors, stone hammers, shovels, tamping machines:
--- Part 5: Rotary impact drilling tools: Covering small blasthole drills, rock drills, and rotary hammers:
--- Part 6: Assembly power tools for threaded fasteners: Covers hydraulic pulse gas triggers, impact wrenches, fastener installation tools,
Nutrunner, open end wrench, ratchet wrench, screwdriver:
--- Part 7: Grinders: Covers grinding grinders, cut-off grinders, polishers and buffers using pot and leaf wheels:
--- Part 8: Grinders and polishers: Covers belt grinders, slide grinders, polishers, compound grinders, linear grinders
light machine:
--- Part 9: Grinders for molds: Covering Angle Die Grinders, Reciprocating Files, Rotary Files, Linear Die Grinders
turbine:
--- Part 10: Squeeze power tools: Covers crimping tools, ring part separators, tools for metal forming, nut splitters,
Extruders, printers, extrusion riveters, cutting tools with parallel blades, jaw extrusion pliers:
--- Part 11: Punching and shearing machines and scissors: Covers punching and shearing machines, scissors:
--- Part 12: Disc, pendulum and reciprocating saws: Covers circular saws, circular knives, saw blades with a radius of less than 50 mm or
Oscillating saws with diamond cutting blades up to a radius of 100 mm, pendulum knives, reciprocating saws including fine saws and bow saws:
--- Part 13: Fastener driving tools:
Safety requirements for hand-held non-electric power tools
Part 11: Punching machines and scissors
1 Scope
This document applies to hand-held non-electric power tools for punching and shearing through reciprocating motion (hereinafter referred to as "punching and shearing machines and shears")
knife"): Punches and shears can be driven by compressed air, hydraulic oil or an internal combustion engine, with or without suspension (e:g: balancing devices)
It can be used by one operator with support of one or two hands:
Note 1: At the time of publication of this document, it was not known that there were punching and shearing machines and scissors driven by internal combustion engines: Once the existence of such power tools is confirmed, this document will be reviewed
Amended to incorporate it:
This document applies to the following products:
--- punching and shearing machine;
---Scissors:
Note 2: See Appendix B for examples of punching and shearing machines and scissors:
This document does not apply to special requirements and modifications for punching and shearing machines and scissors installed on the holding device:
This document covers, in addition to the use of punching and shearing machines and scissors in potentially explosive atmospheres, reasonably foreseeable misuse in the intended use and in the factory
All noteworthy hazards, hazardous conditions or hazardous occurrences when using the tool under the specified conditions:
Note 3: EN13463-1 gives the requirements for the use of non-electrical equipment in potentially explosive atmospheres:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 15706-2012 Risk Assessment and Risk Reduction of Machinery Safety Design General Principles (ISO 12100:2010, IDT)
ISO 3857-3 Vocabulary for compressors, air tools and machinery Part 3: Pneumatic tools and machinery (Compressors,
Note: GB/T 6247:4-2013 Terminology for rock drilling machinery and portable power tools Part 4: Performance test (ISO 3857-3:1989, MOD)
Note: GB/T 6247:1-2013 Terminology for rock drilling machinery and portable power tools Part 1: Rock drilling machinery, pneumatic tools and pneumatic machinery
(ISO 5391:2003, MOD)
ISO 13732-1 Ergonomics of thermal environments - Methods for the evaluation of the human body's response to touching surfaces - Part 1: Hot surfaces (Ergo-
surfaces-Part 1: Hotsurfaces)
ISO 13732-3 Ergonomics of thermal environments - Methods for the evaluation of the human body's response to contact with surfaces - Part 3: Cold surfaces (Ergo-
surfaces-Part 3: Cold surfaces)
ISO 13851 Functional status and design principles of two-hand control devices for mechanical safety (Safety of machinery-Two-hand
Note: GB/T 19671-2005 Functional conditions and design principles of two-hand controls for mechanical safety (ISO 13851:2002, MOD)
ISO 15744 Hand-held non-electric power tool noise measurement method engineering method (level 2) [Hand-heldnon-electric
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32800.11-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 32800.11-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32800.11-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32800.11-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|