|
US$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32800.1-2023: Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32800.1-2023 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
| Valid |
GB/T 32800.1-2023
|
PDF similar to GB/T 32800.1-2023
Basic data | Standard ID | GB/T 32800.1-2023 (GB/T32800.1-2023) | | Description (Translated English) | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J48 | | Classification of International Standard | 25.140.10 | | Word Count Estimation | 22,217 | | Date of Issue | 2023-03-17 | | Date of Implementation | 2023-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 32800.1-2023: Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 25.140.10
CCSJ48
National Standards of People's Republic of China
Safety requirements for hand-held non-electric power tools
Part 1.Assemblies for non-threaded structural fasteners
power tool
Hand-held non-electric power tools-Safety requirements-
(ISO 11148-1.2011, IDT)
Released on 2023-03-17
2023-10-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
3.1 General terms and definitions 2
3.2 Specific terms and definitions for assembly power tools for non-threaded structural fasteners 3
4 Safety requirements and/or protective measures4
4.1 General 4
4.2 Safety of machinery 4
4.3 Thermal safety 5
4.4 Noise Reduction 5
4.5 Vibration 5
4.6 Materials and substances that are disposed of, discarded or discharged5
4.7 Ergonomics 6
4.8 Control device 6
5 test 7
5.1 General test conditions 7
5.2 Noise 7
5.3 Vibration 7
5.4 Unexpected start 7
5.5 Power tool structure 7
5.6 Inspection items for safety requirements 7
6 Usage information 8
6.1 Signs, signs and warnings 8
6.2 User Manual 8
6.3 Operating Instructions 12
6.4 Performance parameters 12
6.5 Care Instructions 13
APPENDIX A (INFORMATIVE) LIST OF HAZARDS TO NOTE 14
Appendix B (informative) Examples of assembly power tools for non-threaded structural fasteners covered by this document 15
Appendix C (Normative) Symbols for Signs and Signs 16
Reference 17
Figure B.1 Assembly tool for non-threaded fasteners 15
Figure B.2 Broken Rod Locking Bolt Tool 15
Figure B.3 Mandrel riveting tool 15
Figure B.4 Rivet nut holder 15
Table 1 Inspection Item 7
Table A.1 Noteworthy hazard list 14
Table C.1 Symbols for signs and signs 16
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is part 1 of GB/T 32800 "Safety Requirements for Handheld Non-electric Power Tools". GB/T 32800 has been released
the following sections.
--- Part 1.Assembly power tools for non-threaded structural fasteners;
--- Part 2.Cutting off and crimping power tools;
--- Part 3.Drilling and tapping machines;
--- Part 4.Pure impact power tools;
--- Part 10.Squeeze power tools;
--- Part 11.Punching and shearing machines and scissors.
This document is equivalent to ISO 11148-1.2011 "Safety requirements for hand-held non-electric power tools - Part 1.Non-threaded tightness
Assembly Power Tools for Firmware".
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Standardization Technical Committee for Rock Drilling Machinery and Pneumatic Tools (SAC/TC173).
This document is drafted by. Dongguan Institute of Technology, Quzhou Institute of Metrology and Quality Inspection, Zhongjie Jieding Industrial Co., Ltd.
The main drafters of this document. Zhou Danni, Yu Zhiyong, Su Guangxi, Zhou Zirong, Wang Xiangping, Su Zheyi, Xu Renliu.
Introduction
In order to standardize the safety requirements of hand-held non-electric power tools, in order to protect the health of operators and the safety of equipment and the environment, the international standard
The International Organization has released ISO 11148, a total of 13 documents. Our country intends to adopt 13 partial documents of ISO 11148, which are formulated as
The corresponding parts of GB/T 32800 documents. GB/T 32800 is proposed to be constituted as follows.
--- Part 1.Assembly power tools for non-threaded structural fasteners. Covers riveting machines, riveting or plugging tools, broken bar lock bolts
Tools, mandrel riveting tools, rivet nut holders.
--- Part 2.Cutting off and crimping power tools. Covers non-yoke crimpers, cutters, cut-off tools, cutting pliers, crimping pliers.
--- Part 3.Drilling and tapping machines. Covers drills, double handle heavy drills, tapping machines.
--- Part 4.Pure impact power tools. Covers breakers, chisels, shovels, engraving pens, descaling hammers, picks, portable pile drivers, driver
Presses, compactors, stone hammers, shovels, tamping machines.
--- Part 5.Rotary impact drilling tools. Covering small blasthole drills, rock drills, and rotary hammers.
--- Part 6.Assembly power tools for threaded fasteners. Covers hydraulic pulse gas triggers, impact wrenches, fastener installation tools,
Nutrunner, open end wrench, ratchet wrench, screwdriver.
--- Part 7.Grinders. Covers grinding grinders, cut-off grinders, polishers and buffers using pot and leaf wheels.
--- Part 8.Grinders and polishers. Covers belt grinders, slide grinders, polishers, duplex grinders, linear grinders
light machine.
--- Part 9.Grinders for molds. Covering Angle Die Grinders, Reciprocating Files, Rotary Files, Linear Die Grinders
turbine.
--- Part 10.Squeeze power tools. Covers crimping tools, ring part separators, tools for metal forming, nut splitters,
Extruders, printers, extrusion riveters, cutting tools with parallel blades, jaw extrusion pliers.
--- Part 11.Punching and shearing machines and scissors. Covers punching and shearing machines, scissors.
--- Part 12.Disc, pendulum and reciprocating saws. Covers circular saws, circular knives, saw blades with a radius of less than 50 mm or
Oscillating saws with diamond cutting blades up to a radius of 100mm, pendulum knives, reciprocating saws including fine saws and bow saws.
--- Part 13.Fastener driving tools.
Safety requirements for hand-held non-electric power tools
Part 1.Assemblies for non-threaded structural fasteners
power tool
1 Scope
This document applies to blind rivets, solid rivets, bolts, plugs, and other metal, plastic, and other materials that enter from one side of the workpiece.
Hand-held non-electric power tools for installing, fastening or removing fasteners (hereinafter referred to as "assembly power tools for non-threaded structural fasteners)
tool"). Power tools for assembling non-threaded structural fasteners can be driven by compressed air, hydraulic oil or an internal combustion engine, with or without suspension
(e.g. balancing devices) for use by one operator supported by one or both hands.
Note 1.At the time of publication of this document, it has not been known that there are assembly power tools for non-threaded structural fasteners driven by internal combustion engines. Once such dynamics are identified
tool, this document will be revised to incorporate it.
This document applies to the following products.
---Riveting machines, riveting or plugging tools;
---Broken rod locking bolt tool;
--- Mandrel riveting tool;
--- Rivet nut holder.
Note 2.See Appendix B for examples of assembly power tools for non-threaded structural fasteners.
This document does not apply to special requirements and requirements for the installation of non-threaded structural fasteners with assembly power tools on holding devices.
retrofit.
This document deals with the use of power tools for the assembly of non-threaded structural fasteners in potentially explosive atmospheres, in the intended use and manufacture
All noteworthy hazards, hazardous conditions or hazardous events when using the tool under misuse conditions that are reasonably foreseeable by the manufacturer.
Note 3.EN13463-1 gives the requirements for the use of non-electrical equipment in potentially explosive atmospheres.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 15706-2012 Risk Assessment and Risk Reduction of Machinery Safety Design General Principles (ISO 12100.2010, IDT)
ISO 3857-3 Vocabulary for compressors, air tools and machinery Part 3.Pneumatic tools and machinery (Compressors,
Note. GB/T 6247.4-2013 Terminology for rock drilling machinery and portable power tools Part 4.Performance test (ISO 3857-3.1989, MOD)
Note. GB/T 6247.1-2013 Terminology for rock drilling machinery and portable power tools Part 1.Rock drilling machinery, pneumatic tools and pneumatic machinery
(ISO 5391.2003, MOD)
ISO 13732-1 Ergonomics of thermal environments - Methods for the evaluation of the human body's response to touching surfaces - Part 1.Hot surfaces (Ergo-
surfaces-Part 1.Hotsurfaces)
ISO 13732-3 Ergonomics of thermal environments - Methods for the evaluation of the human body's response to contact with surfaces - Part 3.Cold surfaces (Ergo-
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32800.1-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 32800.1-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32800.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32800.1-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|