US$534.00 · In stock Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32800.5-2023: Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 32800.5-2023 | English | 534 |
Add to Cart
|
5 days [Need to translate]
|
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
| Valid |
GB/T 32800.5-2023
|
PDF similar to GB/T 32800.5-2023
Basic data Standard ID | GB/T 32800.5-2023 (GB/T32800.5-2023) | Description (Translated English) | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J48 | Classification of International Standard | 25.140.10 | Word Count Estimation | 29,236 | Date of Issue | 2023-11-27 | Date of Implementation | 2024-06-01 | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 32800.5-2023: Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
\u0003 \b \u0003 \u0006 \t \f \f \u0010 \u001d \u0006
\f, 0 )
\f0 )
Safety requirements for handheld non-electric power tools
Part 5: Rotary impact drilling tools
Hand⁃held non⁃electric power tools-Safety requirements-
Part 5: Rotary percussive drills
Published on 2023-11-27
2024-06-01 Implementation
CCS J 48
ICS 25:140:10
(ISO 11148⁃5:2011, IDT)
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
3:1 General terms and definitions 2
3:2 Special terms and definitions for rotary impact drilling tools 3
4 Safety requirements and/or protective measures 4
4:1 General 4
4:2 Machinery safety 4
4:3 Thermal safety 4
4:4 Noise reduction 5
4:5 Vibration 5
4:6 Materials and substances processed, discarded or discharged 5
4:7 Ergonomics 6
4:8 Control device 6
5 inspection 7
5:1 General test conditions 7
5:2 Noise 7
5:3 Vibration 7
5:4 Unexpected start 7
5:5 Power tool structure 7
5:6 Inspection items for safety requirements 7
6 Usage information 8
6:1 Logo, signs and warnings 8
6:2 User Manual 9
6:3 Operating Instructions 13
6:4 Performance Parameters 13
6:5 Care instructions 14
Appendix A (Informative) List of Noteworthy Hazards 15
Appendix B (informative) Examples of rotary impact drilling tools covered in this document 17
Appendix C (normative) Symbols for signs and signs 18
Table of contents
Appendix D (Normative) Additional safety requirements for internal combustion power tools19
D:1 Overview 19
D:2 Hazard List19
D:3 Safety requirements and measures19
D:4 Usage Information 20
Reference 22
Figure B:1 Rock drill 17
Figure B:2 Rotary hammer 17
Figure B:3 Small blast hole drill 17
Figure B:4 Outrigger rock drill for underground use 17
Table 1 Inspection items 7
Table A:1 List of hazards worth noting15
Table C:1 Symbols for signs and signs18
Table D:1 Hazard list of tools powered by internal combustion engines19
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document is Part 5 of GB/T 32800 "Safety Requirements for Handheld Non-Electric Power Tools": GB/T 32800 has been released
The following sections:
--Part 1: Power tools for assembly of non-threaded structural fasteners;
--Part 2: Cutting off and withholding power tools;
--Part 3: Drilling and tapping machines;
--Part 4: Pure impact power tools;
--Part 5: Rotary impact drilling tools;
--Part 6: Power tools for assembly of threaded fasteners;
--Part 8: Grinding and polishing machines;
--Part 9: Grinding machines for grinding tools;
--Part 10: Extrusion power tools;
--Part 11: Punching machines and scissors:
This document is equivalent to ISO 11148⁃5:2011 "Safety requirements for hand-held non-electric power tools Part 5: Rotary impact drills"
Hole Tool":
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Standardization Technical Committee for Rock Drilling Machinery and Pneumatic Tools (SAC/TC 173):
This document was drafted by: Zhejiang University Ningbo Institute of Technology, Tianshui Rock Drilling Machinery Pneumatic Tools Research Institute, Quzhou Metrology and Quality Inspection Research Institute,
Changsha Tianhe Drilling Tool Machinery Co:, Ltd:, Guangdong New Bix Industrial Co:, Ltd:
The main drafters of this document: Gan Li, Kang Xin, Tong Lianghuai, Shi Minghui, Zeng Yihua, Chen Jilong, Huang Zengyang, Tang Hao, and He Yu:
Introduction
In order to standardize the safety requirements for hand-held non-electric power tools to protect the personal health of operators and the safety of equipment and the environment, international standards
The international organization has released ISO 11148, a total of 13 parts of documents: Our country plans to adopt the 13 partial documents of ISO 11148 on an equal basis and formulate them as
Corresponding documents of each part of GB/T 32800: GB/T 32800 is proposed to be composed as follows:
--Part 1: Power tools for assembly of non-threaded structural fasteners: Covers riveting machines, riveting or plug tools, break rod locking bolters
Tools, mandrel riveting tools, rivet nut holders:
--Part 2: Cutting off and Withholding Power Tools: Covers non-yoke crimpers, cutters, cutting tools, cutting pliers, and crimping pliers:
--Part 3: Drilling and Tapping Machines: Covers drills, double-handle heavy-duty drills, and tapping machines:
--Part 4: Pure impact power tools: Covers crushers, chisels, shovels, engraving pens, rust removal hammers, picks, portable pile drivers,
Printing machine, tamping machine, stone hammer, shovel, tamping machine:
--Part 5: Rotary impact drilling tools: Covers small blasthole drills, rock drills, and rotary hammers:
--Part 6: Power tools for assembly of threaded fasteners: Covers hydraulic pulse gas triggers, impact wrenches, fastener installation tools,
Nut wrenches, open end wrenches, ratchet wrenches, screwdrivers:
--Part 7: Grinder: Covers grinding grinders, cutting grinders, polishers and grinders using bowl and leaf wheels:
--Part 8: Grinders and polishers: Covers belt polishers, skateboard polishers, polishing machines, compound polishers, and rotary polishers
machine, linear polishing machine:
--Part 9: Grinding machines for molds: Covers grinders for angle molds, reciprocating files, rotary files, and sand for linear molds
Turbine:
--Part 10: Extrusion power tools: Covers crimping tools, ring parts separators, metal forming tools, nut splitters,
Extruders, printers, extrusion riveters, cutting tools with parallel blades, jaw extrusion pliers:
--Part 11: Punching machines and scissors: Covers punching and shearing machines and scissors:
--Part 12: Disc, pendulum and reciprocating saws: Covers circular saws, circular cutters, saw blades with a radius of less than 50 mm or
Oscillating saws, oscillating cutters, and reciprocating saws including fine saws and hack saws with diamond cutting blades with a radius of less than 100 mm:
--Part 13: Fastener driving tools:
Safety requirements for handheld non-electric power tools
Part 5: Rotary impact drilling tools
1 Scope
This document specifies hand-held non-electric power tools (hereinafter referred to as "rotary impact tools") for drilling holes in hard materials such as rock and concrete:
safety requirements for "type drilling tools"): Rotary impact drilling tools can be driven by compressed air, hydraulic oil or internal combustion engines, with or without use:
For use by one operator with one or two hands when using a suspension device (e:g: counterbalance):
This document applies to the following products:
--Small blast hole drill;
--Rock drill;
-- Rotary hammer:
Note 1: See Appendix B for examples of rotary impact drilling tools:
This document does not apply to special requirements and modifications of rotary impact drilling tools for mounting them on clamping devices:
This document deals with situations other than the use of rotary impact drilling tools in potentially explosive atmospheres that are reasonably foreseeable by the intended use and manufacturer:
All noteworthy hazards, dangerous situations or hazardous events when using a tool under misuse conditions:
Note 2: EN 13463⁃1 gives requirements for the use of non-electrical equipment in potentially explosive atmospheres:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:
document:
GB/T 15706-2012 General principles for mechanical safety design risk assessment and risk reduction (ISO 12100::2010, IDT)
ISO 3857⁃3 Glossary of compressors, pneumatic tools and machinery Part 3: Compressors, pneumatic
tools and machines-Vocabulary-Part 3: Pneumatic tools and machines)
Note: GB/T 6247:4-2013 Rock drilling machinery and portable power tools terminology Part 4: Performance test (ISO 3857⁃3:1989, MOD)
ISO 5391 Pneumatic tools and machines-Vocabulary
Note: GB/T 6247:1-2013 Rock drilling machinery and portable power tools terminology Part 1: Rock drilling machinery, pneumatic tools and pneumatic machinery
(ISO 5391:2003, MOD)
ISO 9158 Road vehicles-Nozzles spouts for unleaded gasoline (Road vehicles-Nozzles spouts for unleaded gasoline)
ISO 9159 Road vehicles-Nozzles spouts for leaded gasoline and diesel fuel (Road vehicles-Nozzles spouts for uneaded
gasoline)
ISO 13732⁃1 Ergonomics of thermal environments Methods for the evaluation of human reactions to contact surfaces Part 1: Thermal surfaces (Ergo⁃
nomics of the thermal environment-Methods for the assessment of human responses to contact with surfac⁃
es-Part 1: Hot surfaces)
ISO 13732⁃3 Ergonomics of thermal environments Methods for the evaluation of human reactions to contact surfaces Part 3: Cold surfaces (Ergo⁃
nomics of the thermal environment-Methods for the assessment of human responses to contact with surfac⁃
es-Part 3: Cold surfaces)
ISO 15744 Engineering method for measuring noise from handheld non-electric power tools (Level 2) [Hand⁃held non⁃electric power
|