|
US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32370-2015: Determination of the length and width for adhesive tapes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32370-2015 | English | 129 |
Add to Cart
|
3 days [Need to translate]
|
Determination of the length and width for adhesive tapes
| Valid |
GB/T 32370-2015
|
PDF similar to GB/T 32370-2015
Basic data | Standard ID | GB/T 32370-2015 (GB/T32370-2015) | | Description (Translated English) | Determination of the length and width for adhesive tapes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G38 | | Classification of International Standard | 83.180 | | Word Count Estimation | 6,627 | | Date of Issue | 2015-12-31 | | Date of Implementation | 2016-07-01 | | Regulation (derived from) | State Standard Announcement 2015 No.43 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 32370-2015: Determination of the length and width for adhesive tapes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of the length and width for adhesive tapes
ICS 83.180
G38
National Standards of People's Republic of China
Determination of length and width of the adhesive tape
Issued on. 2015-12-31
2016-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee adhesive (SAC/TC185) centralized.
This standard was drafted. Shanghai Institute of Rubber Products, Wing Tai (Zhongshan) Co., Ltd., Shanghai Regent Adhesive Development Co., Ltd.,
Sea deer of Investment (Group) Co., Ltd. Zhejiang Yonghe Adhesive.
The main drafters. Zhang Jianqing, milky Jian, Tang Minfeng, Chenhua Chang, Li Chunlei, Song magnetic people.
Determination of length and width of the adhesive tape
1 Scope
This standard specifies the test method for adhesive tape length and width.
This standard applies to the determination of the length and the width of the tape.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 9056 metal ruler
GB/T 21389-2008 cursor, with table and several Caliper
GB/T 22396 the term pressure-sensitive Adhesive
QB/T 2443 Steel Tape
3 Terms and Definitions
Terms and definitions GB/T 22396 apply to this document defined.
4 General requirements for tests
4.1 Sample preparation and pretreatment of samples
Sample at a temperature of (23 ± 1) ℃, relative humidity of (50 ± 5)% of the standard environment for at least 24h. When the sample is in the shape of rolling
Tense, placing increased more than 2h.
Unless otherwise specified, gently unwound in order to prevent the occurrence of deformation of the specimen. According to the requirements of the test, and cut the required size and number of samples from
Samples. Specimens should be handled carefully to minimize direct contacts with adhesive.
4.2 The results of numerical trade-offs
Test results are reported in Table 1 provisions.
Table 1 choice test result values
The median number of pilot projects report
After a digit length/m decimal point
Width/mm
Width ≤150 digit after the decimal point
Width > 150 integer
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32370-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 32370-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32370-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32370-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|