|
US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32215-2015: Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32215-2015 | English | 274 |
Add to Cart
|
3 days [Need to translate]
|
Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components
| Valid |
GB/T 32215-2015
|
PDF similar to GB/T 32215-2015
Basic data | Standard ID | GB/T 32215-2015 (GB/T32215-2015) | | Description (Translated English) | Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Classification of International Standard | 23.100.50 | | Word Count Estimation | 14,135 | | Date of Issue | 2015-12-10 | | Date of Implementation | 2016-07-01 | | Quoted Standard | GB/T 17446-2012 | | Adopted Standard | ISO 11727-1999, IDT | | Regulation (derived from) | National Standard Announcement 2015 No.38 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the pneumatic directional control valve identification and labeling rules for air intake. Air intake includes a main gas line connection port, control of air routes connecting port and pilot gas line connection port. This standard applies to the electromagnetic coil cable identification and labeling rules. But not the internal electrical connections for integrated components, such as connection to the bus control system. This standard specifies the directional control valve control mechanism of identification and labeling rules. This standard specifies the filter, regulator, lubricator, check valves, flow control valves and other auxiliary components to identify inlet and (or) flows and labeling rules. This standard does not include pneumatic proportional control valve, pneumatic logic valves, cylinders, air motors, swing cylinder, intake port identification and labeling rules of the air compressor, air dryer or other elements in this standard, no particular description. | GB/T 32215-2015: Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Logo pneumatic control valves and other components of the air inlet and control mechanism)
ICS 23.100.50
J20
National Standards of People's Republic of China
Pneumatic control valves and other components of the air intake and
Identifies the control mechanism
(ISO 11727.1999, IDT)
Issued on. 2015-12-10
2016-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 General Principle 2
5 directional control valve 3
6 quick exhaust valve, shuttle valve and lock valve 5
7 shut-off valve 5
8 flow control valves, check valves and pressure relief valve 5
9 regulator and filter regulator 6
10 filters, oil mist and auxiliary elements 6
Example 6 11
12 label Description 6
Appendix A (informative) Symbol Recognition Example 7
Reference 9
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the translation method identical with ISO 11727.1999 air inlet and control means "Pneumatic control valves and other components of
Identity. "
Correspondence between the consistency of the standards of international documents and normative references of the following documents.
--- GB/T 17446-2012 Fluid power systems and components - Vocabulary (ISO 5598.2008, IDT).
This standard made the following editorial changes.
--- References used in the applicable file instead of the international documents and deleted the defunct ISO 5599-3.1990.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee of hydraulic and pneumatic (SAC/TC3) centralized.
This standard is drafted by. Ningbo Jia Ling Er Pneumatic Machinery Co., Ltd.
Participated in the drafting of this standard. Fenghua Xingyu Electronics Co., Ltd. Ningbo aerodynamic package, Ningbo Sono industrial automation
Equipment Co., Ltd., the National Air Quality Supervision and Inspection Center, Ningbo AirTAC Automation Industry Co., Ltd., Weihai Bo wins Qidongyeya
Ltd., Yantai Future Automatic Equipment Co., Ltd, Shanghai sets of pneumatic three branch companies.
The main drafters of this standard. single Junbo, Yanrui Kang, Cao Jianbo, Zhang Miao Ying, Xia Jiayong unit silver, Zhang excellent wave, Lupo, Ann Hui Wei, Fang Qinghua,
Early Chen Yang, Zhang Zhiqing, Caochang Zhen, Guoxue Jing, Caixing Liang.
Introduction
In the pneumatic system, the power is through a closed loop control and compressed air to pass.
The flow direction of the fluid flow channel depends pneumatic system components selected conduction and switching.
Gas inlet and identification mechanism allows the user to control the pneumatic system components properly connected.
Pneumatic control valves and other components of the air intake and
Identifies the control mechanism
1 Scope
1.1 standard specifies the pneumatic directional control valve identification and labeling rules for air intake. Air intake includes a main gas line connection port, control of air routes connecting port
And pilot gas line connection port.
1.2 This standard applies to the electromagnetic coil cable identification and labeling rules. But it does not apply to internal electrical connections integrated components, such as bus
Control connection system.
1.3 This standard specifies the directional control valve control mechanism of identification and labeling rules.
1.4 This standard specifies the filter, regulator, lubricator, check valves, flow control valves and other auxiliary components inlet and (or) the flow of knowledge
Do and labeling rules.
1.5 standard does not include pneumatic proportional control valve, pneumatic logic valves, cylinders, air motors, swing cylinder, air compressor, air dryer or
Air intake identification and labeling rules for other elements in this standard, no particular description.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 5598 Fluid power systems and components - Vocabulary (Fluidpowersystemsandcomponents-Vocabulary)
3 Terms and Definitions
As defined in ISO 5598 and the following terms and definitions apply to this standard.
3.1
Control means controlmechanism
The elements providing means (e.g., a joystick, electromagnet) of the input signal.
Note. Sometimes also used the term "manipulator" and "executing agency" represents this definition, but the "control means" is preferred.
3.2
The pilot inlet pilotcontrolport
Change makes state control element is changed by the inlet pressure (pressure change usually signals from an external source).
3.3
External pilot air intake externalpilotsupplyport
Receiving continuous, uninterrupted gas supply pressure from the outside air intake (as used by the control means).
3.4
Primary air inlet mainports
When the control element operating mechanism, which communicates with another air intake or closed air intakes.
3.5
Solenoid cable solenoidlead
Directly connecting wires to the solenoid coil.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32215-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 32215-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32215-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32215-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|